• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.191-199
• /
• 2000

In this research, the finite element analysis of piezocone penetration and dissipation tests has been conducted using the anisotropic elastoplastic-viscoplastic bounding surface model, virtual work equation, and theory of mixtures formulated in the Up[dated Lagrangian reference frame for the large deformation and finite strain nature of piezocone penetration. The formulated equations have been implemented into a finite element program. The cone resistance, excess pore water pressure, and dissipation of excess pore water pressure from the finite element analysis have been compared and investigated. An effective simulation could be performed with the use of the anisotropic and viscous soil model. The finite element formulations and the results are described in part 'I' and part 'II' respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.265-274
• /
• 2007

A study has been conducted to clarify NO emission behavior through preferential diffusion effects of $H_2$ and H in methane-hydrogen diffusion flames. A comparison is made by employing three species diffusion models. Special concerns are focused on what is the deterministic role of the preferential diffusion effects in flame structure and NO emission. The behavior of maximum flame temperatures with three species diffusion models is not explained by scalar dissipation rate but the nature of chemical kinetics. The preferential diffusion of H into reaction zone suppresses the populations of the chain carrier radicals and then flame temperature while that of $H_2$ produces the increase of flame temperature. These preferential diffusion effects of $H_2$ and H are also discussed about NO emissions through the three species diffusion models.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.46-52
• /
• 2018

Detail development and performance tests were conducted for the purpose of developing a damper system capable of lateral displacement control of existing frame structures. The development details are 1) ALD designed to prevent deformation of beams between columns and 2) AWD designed to control inter-story displacement. The non-reinforced BF specimen was used as a comparative study. The evaluation variables are failure mode, load-displacement curve, envelope curve, maximum strength, stiffness degradation and energy dissipation capacity. As a result, the seismic strengthening effect of ALD and AWD was confirmed. Also, it was confirmed that the method of restraining the column with the aramid sheet is superior to the improvement of the seismic performance.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.3
• /
• pp.585-592
• /
• 2008

The present study was conducted to investigate the anti-allergic activity of Gunggwihyangso-San(GHS). We investigated the anti-allergic effects of GHS in RBL-2H3 basophilic leukemia cells by compound 48/80, a mast cell degranulator and compound 48/80 induced anaphylactic shock in mice. Gunggwihyangso-San significantly inhibited ${\beta}$-hexosaminidase and histamine release from compound 48/80 stimulated RBL-2H3 cells. In addition, GHS effectively inhibited anaphylactic shock in mice by 50% at a dose 80 mg/mouse versus PBS treated control after the I.p injection(8 mg/kg) of compound 48/80. The in vitro anti-inflammatory activities of GHS in LPS-stimulated RAW 264.7 cells were investigated. GHS inhibited NO production in LPS-stimulated RAW 264.7 cells and effectively dowregulated the expression of iNOS mRNA and iNOS protein expression in LPS-stimulated RAW 264.7 cells. These result provide evidences that GHS may be beneficial in the treatment of allergic inflammtory disease.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.115-121
• /
• 1982

Sodium hypochlorite solution has been widely used as endodontic irrigant due to its ability to dissolve pulp tissue debris and its antimicrobial action. This in vitro study was conducted to evaluate the solvent action of sodium hypochlorite solution on vital pulp tissue under various conditions include concentration, exposure time, and temperature. The percentage of weight loss due to pulp tissue dissolution was calculated with weight difference of lyophilized specimens before and after the exposure to test solutions. The results were as follows; Statistical analysis indicated that the ability of both 5.0% and 2.5% sodium hypochlorite solutions to dissolve pulp tissue was significantly greater than that of distilled water, but no significant difference was found between 5.0% and 2.5% sodium hypochlorite solutions. There was no significant increase in the pulp tissue dissolving ability of sodium hypochlorite solutions; as exposure time increased 2 minutes, 5 minutes, and 10 minutes. Of the given temperatures, no significant difference was found in the solvent aciton of sodium hypochlorite solution on pulp tissue between $20^{\circ}C$ (room temperature) and $37^{\circ}C$(body temperature).

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.586-588
• /
• 2000

본 논문은 전자 패키징의 방열 성능을 개선하기 위하여 초소형 히트 파이프를 제작하고 열전달 성능을 시험한 결과를 보여준다. IC 칩이 점점 고성능화되고 고집적화되어 감에 따라 발열 문제가 대두되는데, 이 열은 전도만으로는 충분히 소산시킬 수 없고 패키징 표면에 별도의 장치를 장착하는 것은 시스템 소형화의 장애 요소가 된다. 따라서, 고성능 칩 개발을 위한 선결 과제로 고성능 초소형 냉각 장치가 요구되고 있다. 히트파이프는 밀봉된 파이프 내의 2상 유동과 상변화 잠열을 이용하여 열원으로부터 히트 싱크로 열을 효과적으로 전달하는 열교환 장치이다. 본 논문에서는 전자 패키징 내에 집적화할 수 있도록 초소형 히트 파이프 어레이를 제작하여 그 성능을 시험한 결과 증발부의 온도가 $12.1^{\circ}C$ 감소됨을 보인다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.35-35
• /
• 1999

KSTAR NBI 장치의 진공용기와 Grid에 대하여 열 및 구조해석을 ANSYS 코드를 이용하여 수행하였다. 진공용기의 경우 진공용기 지지구조물을 최적화할 수 있는 구조형상에 관하여 연구하였고, Grid의 경우 Grid 형상 및 재료 특성에 중점을 두어 연구하였다. 또한 Electron Dump의 냉각수로의 위치 및 형상, 크기를 최적화시켰다. 이번 각 구조물의 최적화 연구에서 특히 중점을 둔 사항은 재료와 관련된 경제성이다. 진공용기에서 가장 문제가 되는 것은 용기의 크기에 따른 변형도이다. 진공용기의 Cryo-sorption 패널 배기속도는 30000 I/sec 이상이고, 진공 용기의 운전시 진공도는 5$\times$10-7Torr 이하이다. 구조해석의 결과로부터 폭 3m$\times$높이 4,m$\times$길이 5m, 두께 2cm인 진공용기는 대기압 하에서 7cm의 변형도를 갖는다. 변형을 최소화하기 위해 T형 보강구조물을 부착시켰을 때 변형도가 1cm 이하로 감소함을 볼 수 있었다. [그림1] 장시간 운전시 Grid에 미치는 열부하에 의한 영향을 연구하였다. 열해석 결과와 경제성, 가공성을 동시에 고려할 때 Grid의 재질로 무산소동이 적합함을 알 수 있었다. 한편, NBI 장치에서 열부하가 최대인 곳은 이온원의 Electron Dump 부분으로 중심부분에서 20MW/m2이다. 열부하를 효과적으로 소산시키기 위해 Electron dump 의 중심부분 모양을 깔대기 모양으로 만들어 Dump 뒷부분의 자석에 미치는 영향을 최소화 시켰다. 이 때 냉각수록의 냉각수 흐름속도 4.5m/sec이고, 자석의 최대 온도는 15$0^{\circ}C$로써 자석의 기본성질을 일어버리지 않는 허용범위 내에 들어옴을 알 수 있었다. 자석의 온도는 10초 동안 급격히 상승하였고, 100초 이후에 포항상태에 도달하였다 [그림2]

• Land and Housing Review
• /
• v.6 no.1
• /
• pp.21-29
• /
• 2015

Coupling beams posses proper strength, stiffness and ductility capacities to resist efficiently under seismic loads. The strength, stiffness and ductility capacities for special diagonally reinforced concrete coupling beam with a span-to-depth ratio 2.0 or less is higher than those of coupling beam with conventionally reinforced concrete coupling beam. However, diagonally reinforced detailing creates major construction problem. In this study, design alternatives for diagonally reinforced concrete coupling beams were experimentally investigated. The results show that angle reinforced coupling beam(specimen SA) exhibited a better stable behavior in comparison with non-diagonally coupling beams(specimens SB-series) and sustained corresponding drift ratio, peak-to-peak stiffness and cumulative dissipated energy in comparison to diagonally coupling beam(specimen CA).

• Fire Science and Engineering
• /
• v.19 no.4 s.60
• /
• pp.37-41
• /
• 2005

The present study describes the cooling performance of two kinds of water mist systems used in fire extinguishment. The cooling is necessary for the prevention of an auto re-ignition of the power transformer. A heat source for such the re-ignition is the accumulated thermal energy in the dielectric oil from the transformer core. Because of the weight of the real core, reduced-scale experiments are carried out. A similarity analysis Is also performed to determine the discharge time of the water mist systems from the experimental results. The discharge time to prevent the re-ignition in the real-scale transformer is estimated about 12 hour from the similarity analysis of the reduced-scale experiments.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.139-141
• /
• 2008

최근 우리나라는 국토면적을 넓히기 위하여 많은 지역에 준설 및 매립 공사를 수행하고 있다. 준설 및 매립공사 시 주재료로 사용되는 해성점토는 매립 초기에 매우 연약한 지반을 형성하게 된다. 이에 빠른 구조물 시공을 위하여 대상지반의 압밀을 촉진시키는 다양한 공법이 활발히 연구되고 있다. 본 연구는 새로운 압밀촉진 공법개발을 위한 기초시험으로써 초음파 에너지를 연약지반 처리에 활용하고자 자체 고안된 초음파 발생장치를 적용하여 소규모 및 대형시험을 수행하였다. 시험에 사용된 연약 지반 점토시료는 시험조건의 일관성을 유지하기 위하여 자체개발한 원심력 시료 성형기를 사용하였다. 초음파 적용에 따른 압밀시험결과 매우 큰 압밀량의 증가를 확인할 수 있었으며 대형 시험의 경우에도 빠른 간극수압의 소산을 확인 할 수 있었다. 연구결과 초음파가 점토의 압밀시간을 단축시키는데 효과가 크다는 것을 볼 수 있었고, 차후 초음파를 통한 다양한 압밀촉진공법이 개발될 수 있다는 가능성을 확인 할 수 있었다.