• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.7
• /
• pp.2326-2336
• /
• 1996

So most practical combustor is considered to the swirl flame, it is very important to examinate swirl flame structure and combustion characteristics. Recently, attention has been paid to the flame diagnostic by radical luminous intensity. For swirl flame structure and combustion characteristic, reverse flow boundary, temperature, ion current and radical luminous intensity were measured in the double-coaxial swirl combustor which was used principle of multi-annular combustor. This study had three experimental condition, S-type, C-type, SC-type. S-type and C-type flames were formed recirculation zone, but SC-type flame wasn't formed. C-type flame had two recirculation zone. The position with maximum value of ion current and CH-radical, temperature and OH-radical had similarity distribution almost. Therefore, it is possible that the macro structure of flame was measured by radical luminous intensity in the high intensity of turbulent combustion field which was formed by swirl.

• Journal of the Korean Society of Combustion
• /
• v.11 no.4
• /
• pp.27-35
• /
• 2006

The impacts of equivalence ratio on flow structure and flame dynamic in a model gas turbine combustor are investigated using large eddy simulation(LES). Dynamic k-equation model and G-equation flamelet model are employed as LES subgrid model for flow and combustion, respectively. As a result of mean flow field for each equivalence ratio, the increase of equivalence ratio brings about the decrease of swirl intensity through the modification of thermal effect and viscosity, although the same swirl intensity is imposed at inlet. The changes of vortical structure and turbulent intensity etc. near flame surface are occurred consequently. That is, the decrease of equivalence ratio can leads to the increase of heat release fluctuation by the more increased turbulent intensity and fluctuation of recirculation flow. In addition, the effect of inner vortex generated from vortex breakdown on the heat release fluctuation is increased gradually with the decrease of equivalence ratio. Finally, it can be identified that the variations of vortical structure play an important role in combustion instability, even though the small change of equivalence ratio is occurred.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.380-387
• /
• 2012

The present investigation is to examine the thermal behaviors of air flows inside Korean traditional house made of the construction materials transmitted. The methodology is numerical predictions of air flows depend on the temperature distribution inside the indoor spaces. The transient computational simulations are performed along with the different house types, weather condition, and operating time. Thermal properties of building units have been obtained by the parallel measurements and utilized in the numerical works. Consequently, the details of flows and temperature of air in the houses illustrate the thermal design of the traditional Korean house satisfy the requirements of human living.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.268-271
• /
• 2008

In order to understand mixing characteristics of the APU combustor, sector combustor which size is 1/6 of the real combustor was manufactured. To see the inner side of combustor, Poly Carbonate material is used as a combustor riner. Turbo blower is used as a air supplying device and valves are used as controling the air flow. Maximum flow rate of the blower is 7 $m^3$/min and maximum inlet velocity is up to 100 m/s.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.64-73
• /
• 2004

세포 내에서 일어나는 신호 전달 과정은 단백질간의 상호작용을 통해 수행되고 조절된다. 단백질 상호작용 데이터를 활용하여 수행된 연구로는 단백질의 기능을 유추하거나 전체 네트워크 중 다른 지역보다 더 조밀한 상호작용을 추출하여 complex 혹은 pathway를 발견하고 진화 과정을 이해하는 바탕이 되고 있다. 본 연구에서는 신호 전달 경로에 대한 사전 정보 없이 yeast 상호작용 정보와 녹색형광단백질(GFP)을 이용하여 밝혀진 4000여 개의 yeast 단백질 위치 분포 data를 이용하여 신호전달경로를 찾는 방법을 시도했다. 기존 연구에 의해 밝혀진 yeast 내의 단백질 위치 분포 결과를 보면 21개의 category에 대해 각 단백질 상호작용 분포가 다양하게 나타나고, 특정 위치에서 상호작용 빈도수가 현저히 크다는 것을 알 수 있다. 특히 두 단백질이 같은 장소에 있을 경우 상호작용 확률이 높으며, 세포 내 소기관 사이에도 상호작용의 정도가 다양함이 알려져 있다. 따라서 이러한 분포상의 특성을 고려하여 상호작용을 기반으로 하여 세포막 단백질을 출발점으로, 핵에 있는 단백질을 도착점으로 잡고, 그 사이에 존재하는 다양한 가능 경로 중에서 단백질의 위치 정보를 가중치로 사용하여 그 중 최대 가능 경로를 찾도록 구현하였다. 이와 같은 pathway 모델링은 기존에 밝혀진 pathway와의 비교를 통해 알려지지 않은 새로운 경로를 발견하고, 이전에 경로에 참여하지 않은 단백질들을 발견할 수 있고, 이미 알려진 단백질들의 새로운 기능들에 대해서도 추론할 수 있을 것이라 기대한다.

• Asia pacific journal of information systems
• /
• v.15 no.2
• /
• pp.171-193
• /
• 2005

Small firms are considered as the last mile in electronic networks of business enterprises. Since small firms lack in their resources and capabilities for IT deployment, it seems a challenging project to make them electronically linked to their trading partners. This study aims to investigate the factors that influence the intent of small firms to adopt electronic linkage to their trading partners. This study considers the context where small firms already have transaction relationships with partner firms and where their adoption of electronic linkage may influence the nature and performance of the transactional relationships. This study considers the expected value of electronic linkage and the joint actions of the trading firms as the major factors. Its research model also includes traditional factors such as influences from the industry and the trading partner, the support of CEO, and the readiness of the trading partner. Based on the survey data from more than 1000 small firms, the present study performs regression analysis and finds that all but one factor are significant in explaining the variations in the adoption intention of small firms. The exception is the joint action, which is shown to decrease the intention. Based on the results, this study offers business and policy implications that would be useful to business managers and policy makers.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.165-176
• /
• 1996

The flow field and spray characteristics for loop scavenged type 2stroke engine having pancake shape was numerically computed using KIVA-Ⅱ code. The cylinder has 1intake port, 2side intake ports and 1exhaust port with induced flow angle 25 deg. In engine calculation, the chop techniques is used to strip or add planes of cells across the mesh adjacent to the TDC and the BDC(ports parts) for preventing the demand of exceed time during the computation, providing a control on cell height in the squish region. The modified turbulent model including the consideration of the compressibility effect due to the compression and expansion of piston was also used. The case of 25 deg.(injection angle) which is opposite to scavenging flow direction shows better the distribution of droplets and the evaporation rate of droplets compared to other cases(0 deg., - 25 deg.). When injection pressure was increased, the spray tip penetration became longer. When injection pressure was increased, the interaction between the upward gas velocity and spray droplets strongly cause. Thus the breakup of droplets is strongly occurred and the evaporation rate of droplets was found to be better.

• KOMUNHWA
• /
• no.57
• /
• pp.301-314
• /
• 2001

1) Traditional university museums use displays and photo collections of antiquities as means for educating present and future generations. But the success in their mission hinges on whether they can induce the gallery to visit the places. Fortunately, sin

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.32-40
• /
• 2012

For predicting eigenfrequency and initial growth rate of combustion instabilities in lean premixed gas turbine combustor, linear thermoacoustic analysis model was developed in the current paper. A model combustor was selected for the model validation, which has well-defined inlet and outlet conditions and a relatively simple geometry, compared to the combustor in the previous works. Analytical linear equations for thermoacoustic waves were derived for a given combustion system. It was found that the prediction results showed a good agreement with the measurements, even though there was underestimation for instability frequencies. This underestimation was more obvious for a longer flame (i.e. wider temperature distribution) than for a shorter flame.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.613-621
• /
• 2009

Coal is the energy resource which is important with the new remarking energy resource. Coal combustion produces more NOx per unit of energy than any other major combustion technology. Pollutant emission associated with coal combustion will have a huge impact on the environment. Coal conversion has three processes which are drying, coal devolatilization and char oxidation. Coal devolatilization process is important because it has been shown that HCN which is converted from volatile N contributes 60 to 80% of the total NOx produced. This paper addresses mass release behavior of char, tar, gas and HCN in an experiment of Laminar Flow Reactor with two coals such as Roto middle coal (Sub-bituminous) and Anglo coal (Bituminous). The experiment is compared with the data predicted by CPD model for mass release of HCN about Roto south, Indominco, Weris creek and China orch coals. The results show that HCN increases as a function of decreasing the ratio of fixed carbon(FC)/ volatile matter(VM of the coals contain.)