• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.6
• /
• pp.21-27
• /
• 2000

In this paper, we propose a real-time bandwidth allocation scheme of multiplexed VBR MPEG video sequences over ATM network. In order to real time processing, multiplexed source is estimated by linear-prediction per measurement period. If the result CLR value were not sufficient, we proposed a overallocation method and a reallocation one to guarantee QoS. We used two kinds of sources, one is random multiplexed source made of foot different video sources, the other is the one considered the arrange of I frame in the sequence. With those sources, we analyzed the linear prediction, compared overallocation with reallocation method. As a result, in both schemes, the objected CLR value is achieved, the sufficient value COR under 10% when mp is over 1.8 sec, the utilization is over 0.9. Especially, the COR value of the reallocation scheme is better at the same condition.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.96-101
• /
• 2012

An experimental study was conducted to investigate the performance of a concentrating photovoltaic cell (CPV) against temperature. It is know that a high efficiency of a CPV can be achieved only with proper cell temperature as well as high concentration ratio (CR). This study is concerned with appropriate cooling condition for a liquid-convection cooler for the best performance of a specific CPV. A series of experiments was conducted in a range of cell temperatures as a result of varying cooling conditions, while the concentration ratio was 390 and the solar irradiation flux was higher than 900 $W/m^2$ in outdoor environment. The CPV had a planar dimension of 10 by 10 mm. A Fresnel lens was used as a concentrator, of which the dimension was 221 mm(W) ${\times}$ 221 mm(L) ${\times}$ 3 mm(t) and the transmissivity was known to be 0.8. The cooler was attached to the bottom side of the CPV and had a contact area of 21 mm(W) ${\times}$ 26 mm(L), which was identical to the size of the base plate of the CPV. The coolant temperature was controlled by an isothermal bath and the flow rate was controlled and measured by a flowmeter. The experimental results showed that the average of power efficiency of the CPV decreased from 28.6 % to 24.7 % as the cell temperature increased from $36^{\circ}C$ to $97^{\circ}C$. An appropriate cooling method of a CPV might increase the power conversion efficiency by about 4% for the same concentration ratio. Discussion is included from the viewpoint of the combined efficiency in addition to the power efficiency.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2188-2195
• /
• 1999

This paper proposes a new call admission control scheme utilizing an inverse fuzzy vector quantizer(IFVQ) and neuralnet, which combines benefits of IFVQ and flexibilities of FCM(Fuzzy-C-Means) arithmetics, to decide whether a requested call not to be trained in learning phase to be connected or not. The system generates the estimated traffic pattern for the cell stream of a new call, using feasible/infeasible patterns in codebook, fuzzy membership values that represent the degree to which each pattern of codebook matches input pattern, and FCM arithmetics. The input to the NN is the vector consisted of traffic parameters which are the means and variances of the number of cells arriving in decision as to whether to accept or reject a new call depends on whether the NN is used for decision threshold(+0.5). This method is a new technique for call admission control using the membership values as traffic parameter which declared to CAC at the call set up stage, and this is valid for a very general traffic model in which the calls of a stream can belong to an unlimited number of traffic classes. Through the simulations, it is founded the performance of the suggested method outperforms compared to the conventional NN method.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.9-10
• /
• 2016

최근 급속한 산업 발달로 인하여 기존의 수 MW급 대용량 인버터가 산업용 팬, 컴프레서, 고속 철도 시스템 등 여러 분야에 사용되면서 이와 관련된 대용량 인버터 연구가 활발히 진행 중이다. 이런 대용량 인버터는 고효율과 직병렬의 구성된 전력용반도체 소자를 동시다발적으로 제어되어야하기 때문에 멀티레벨 인버터의 구조가 가장 적합하다. Cascaded H-bridge 멀티레벨 인버터는 커패시터와 다이오드를 사용하지 않고 스위치만으로 구성하며, 필터를 따로 구성하지 않아도 정현파와 유사하게 전압을 출력할 수 있다. 이로 인해 고주파 감소 및 각 셀을 직렬로 연결하여 입력전압보다 높은 출력전압을 얻을 수 있다. 또한, 스위칭 방법에 따라 동일한 Cascaded H-bridge 멀티레벨인버터 토폴로지에서도 각 THD와 온도에 따른 손실이 달라질 수 있다. Cascaded H-bridge 멀티레벨 인버터에서 이용하는 스위칭 방식은 첫 번째로 유니폴라 방식을 기본으로 한 Phase-shift가 있다. 이는 180도 위상차를 갖는 2개의 레퍼런스 파형과 위상천이가 된 캐리어 파형의 비교로 PWM (Pulse Width Modulation) 을 수행한다. 두 번째 방식으로는 Level-shift가 있다. 이는 캐리어 파형을 IPD (In-Phase Disposition) 방식으로 수직적으로 대역폭이 연속적이게 나열하여 레퍼런스 파형과 비교하는 PWM방식이다. 본 논문에서는 Phase-shift와 Level-shift 방식에 따른 Cascaded H-bridge 인버터와 NPC (Neutral Point Clamped) 인버터를 결합한 토폴로지에서의 온도에 따른 손실을 분석하고, 시뮬레이션을 통하여 비교 분석하였다.

• Korean Journal of Microbiology
• /
• v.48 no.3
• /
• pp.212-215
• /
• 2012

The antimicrobial activity of ursolic acid (UA) and oleanolic acid (OA), both triterpenoid compounds, against methicillin-resistant Staphylococcus aureus (MRSA) is controversial. We examined the antimicrobial effects of UA and OA against 19 strains of MRSA isolated from Koreans by determining minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC). The data showed that the methicillin-sensitive strain S. aureus KCTC $1621^T$ was more resistant to UA and OA than that of the MRSA strains. The MBC values of UA and OA against MRSA had broad ranges; 4 to 32 ${\mu}g/ml$ and 16 to >256 ${\mu}g/ml$, respectively. It was difficult to understand the different antimicrobial activities of UA and OA among the MRSA strains, because UA and OA antimicrobial mechanisms are unknown. These results indicate that the antimicrobial effects of UA and OA against MRSA are dependent on resistance to UA and OA in each strain.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.67-75
• /
• 2016

This paper investigates how artificial individuals with behavioral memory circuits adaptively evolve with respect to given environments on a cell-level simulation framework simulating artificial individuals. This makes it possible for us to analyse the advantages of artificial individuals with behavioral memory circuits against the simple artificial individuals that can do only simple reactions with respect to the environments and to know which advanced reactions are possible. In order to do this analysis, we experimented various tests on a specific prey pattern and examined the results. As a first experiment, we tested that artificial individuals with four memory steps competed against from those without memory step to those with three memory steps. Experimental results showed that the artificial individuals with four memory steps were superior to most others. However, artificial individuals with two memory steps were better than those with four memory steps. This was caused that the artificial individuals with two memory steps could evolve faster than those of four memory steps. In a second experiment that all types of artificial individuals are simultaneously evolved, the artificial individuals with two memory steps also showed the best result in the experiment. We could conclude that the artificial individuals with memory was better than those without memory and the best memory steps of artificial individuals were depended on the complexity of prey patterns.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.