• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.509-512
• /
• 2009

Powder diffraction patterns of the zeolite mesolite ($Na_{5.33}Ca_{5.33}Al_{16}Si_{24}O_{80}{\cdot}21.33H_2O$), with a natrolite framework topology were measured as a function of pressure up to 5.0 GPa using a diamond-anvil cell and a $200{\mu}m$-focused monochromatic synchrotron X-ray. Under the hydrostatic conditions mediated by pore-penetrating alcohol and water mixture, the elastic behavior of mesolite is characterized by continuous volume expansion between ca. 0.5 and 1.5 GPa, which results from expansion in the ab-plane and contraction along the c-axis. Subsequent to this anomalous behavior, changes in the powder diffraction patterns suggest possible reentrant order-disorder transition. The ordered layers of sodium- and calcium-containing channels in a 1:2 ratio along the b-axis attribute to the $3b_{natrolite}$ cell below 1.5 GPa. When the volume expansion is completed above 1.5 GPa, such characteristic ordering reflections disappear and the $b_{natrolite}$ cell persists with marginal volume contraction up to ca. 2.5 GPa. Further increase in pressure leads to progressive volume contraction and appears to generate another set of superlattice reflections in the $3c_{natrolite}$ cell. This suggests that mesolite in the pressure-induced hydration state experiences order-disorder-order transition involving the motions of sodium and calcium cations either through cross-channel diffusion or within the respective channels.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.596-608
• /
• 2004

A lot of work has been done to reduce disk access time in I/O intensive systems, which store and handle massive amount of data, by distributing data across multiple disks and accessing them in parallel. Most of the previous work has focused on an efficient mapping from a grid cell to a disk number on the assumption that data space is regular grid-like partitioned. Although we can achieve good performance for low-dimensional data by grid-like partitioning, its performance becomes degenerate as grows the dimension of data even with a good disk allocation scheme. This comes from the fact that they partition entire data space equally regardless of distribution ratio of data objects. Most of the data in high-dimensional space exist around the surface of space. For that reason, we propose a new declustering algorithm based on the partitioning scheme which partition data space from the surface. With an unbalanced partitioning scheme, several experimental results show that we can remarkably reduce the number of data blocks touched by a query as grows the dimension of data and a query size. In this paper, we propose disk allocation schemes based on the layout of the resultant data blocks after partitioning. To show the performance of the proposed algorithm, we have performed several experiments with different dimensional data and for a wide range of number of disks. Our proposed disk allocation method gives a performance within 10 additive disk accesses compared with strictly optimal allocation scheme. We compared our algorithm with Kronecker sequence based declustering algorithm, which is reported to be the best among the grid partition and mapping function based declustering algorithms. We can improve declustering performance up to 14 times as grows dimension of data.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.433-439
• /
• 2005

The copolymers were prepared by the emulsion copolymerization of fluoroalky lacrylate-stearylacrylate-m-isopropenyl-${\alpha},\;{\alpha}'$-dimethylbenzyl isocyanate (TMI) in order to obtain water repellent polymers. The respective copolymerization rates of the three monomers considerably depended upon the use of the nonionic emulsifier and the nonionic-cationic mixed emusifier, and the optimum conditions were obtained. The particle sizes of the copolymers were in the range of 105 to 222nm. The particle sizes of the copolymers prepared by the use of the mixed emulsifiers were smaller than those of the copolymers prepared by the use of the nonionic emulsifier. The reactions of both TMI-N-methyl acetamide and TMI-cellobiose did not take place. However, the reaction of TMI-n-butylamine occurred. The water contact angles before and after washing three times for nylon and poly(ethylene terephthalate) (PET) fabrics coated with the copolymer prepared by the use of mixed emulsifier were about $139^{\circ}\;and\;133^{\circ}$ Therefore, the copolymer showed good durable repellency for nylon and PET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.253-256
• /
• 2009

This paper describes a core generator (FFT_Core_Gen) which generates Verilog HDL models of 8 different FFT/IFFT cores with $N=64{\times}2^k$($0{\leq}k{\leq}7$ for OFDM-based communication systems. The generated FFT/IFFT cores are based on in-place single memory architecture, and use a hybrid structure of radix-4 and radix-2 DIF algorithm to accommodate various FFT lengths. To achieve both memory reduction and the improved SQNR, a conditional scaling technique is adopted, which conditionally scales the intermediate results of each computational stage, and the internal data and twiddle factor has 14 bits. The generated FFT/IFFT cores have the SQNR of 58-dB for N=8,192 and 63-dB for N=64. The cores synthesized with a $0.35-{\mu}m$ CMOS standard cell library can operate with 75-MHz@3.3-V, and a 8,192-point FFT can be computed in $762.7-{\mu}s$, thus the cores satisfy the specifications of wireless LAN, DMB, and DVB systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.80-85
• /
• 2019

Vanadium dioxide is a well-known metal-insulator phase transition material. Lots of researches of vanadium redox flow batteries have been researched as large scale energy storage system. In this study, vanadium oxide($VO_x$) thin films were applied to cathode for lithium ion battery. The $VO_x$ thin films were deposited on Si substrate($SiO_2$ layer of 300 nm thickness was formed on Si wafer via thermal oxidation process), quartz substrate by RF magnetron sputter system for 60 minutes at $500^{\circ}C$ with different RF powers. The surface morphology of as-deposited $VO_x$ thin films was characterized by field-emission scanning electron microscopy. The crystallographic property was confirmed by Raman spectroscopy. The optical properties were characterized by UV-visible spectrophotometer. The coin cell lithium-ion battery of CR2032 was fabricated with cathode material of $VO_x$ thin films on Cu foil. Electrochemical property of the coin cell was investigated by electrochemical analyzer. As the results, as increased of RF power, grain size of as-deposited $VO_x$ thin films was increased. As-deposited thin films exhibit $VO_2$ phase with RF power of 200 W above. The transmittance of as-deposited $VO_x$ films exhibits different values for different crystalline phase. The cyclic performance of $VO_x$ films exhibits higher values for large surface area and mixed crystalline phase.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.88-88
• /
• 2019

현삼과(Scrophulariaceae)의 둥근산꼬리풀(Veronica rotunda Nakai)은 흰색의 꽃이 총상화서로 피며, 관상용으로 쓰인다. 또한, 접선골도라 하여, 전초를 약용하고 활혈, 지혈, 청폐열, 화간위에 효능이 있는 자생식물이다. 본 연구는 둥근산꼬리풀의 포트 재배방법 확립을 위하여 2018년 5월 15일에 파종하여 생산된 유묘를 7월 16일에 정식하여 10월 15일까지 약 14주 동안 수행하였다. 식재용기 실험은 비닐포트[3치($7{\times}7cm$), 4치($9{\times}8.5cm$)]와 플라스틱 화분[8호($7{\times}7cm$), 10호($9{\times}9cm$), 12호($10.5{\times}10.5cm$)]를 이용하였고, 토양 종류[중화 피트모스:펄라이트(3:1, 4:1), 마사토:중화 피트모스(2:1, 3:1)], 묘의 소질[파종 립수(1, 2, 4, 6립), 파종 용기(162, 200, 288구 트레이)] 등의 연구를 진행하였다. 대조구는 플라스틱 화분 10호에 원예상토를 충진하고 200구 트레이에 4립씩 파종하여 생산된 1셀을 정식하였다. 연구의 결과, 식재용기에 따른 둥근산꼬리풀의 생육은 플라스틱 12호 화분에서 가장 양호하였으며, 토양의 양이 많을수록 전반적인 생육이 증가하였다. 토양 종류별로는 원예상토에서 재배한 처리구에서 양호한 생육을 보였다. 중화 피트모스와 펄라이트 3:1 혼용토의 경우, 원예상토와 전반적인 생육에 큰 차이가 없어 이용가치가 있을 것으로 판단된다. 한편, 피트모스의 비율이 높은 4:1 혼용토에서는 비교적 생육이 억제되었으며, 잎이 황화되었다. 마사토와 중화 피트모스의 혼용토는 원예상토에 비해 왜화되는 결과를 보였으며, 측지수, 마디수, 엽수에는 큰 영향을 주지 않았다. 그러나 개화율을 감소시키는 결과를 보였다. 셀당 파종한 종자의 양을 달리하여 생산된 유묘를 정식하여 재배한 결과, 전반적인 생육은 1립 파종구에서 양호하였다. 한편, 파종량이 많을수록 초장, 절간장이 감소하며, 포트당 마디수, 측지수 및 개화율이 증가하여, 본 연구의 목표인 관상적 이용에 적합한 것으로 판단된다. 파종용기별 생산된 유묘이식 결과, 초기생육이 왕성할수록 후기생육도 우수하였다. 162구 생산묘 정식구는 다른 처리구보다 전반적으로 생육이 왕성하였으며, 다음으로 200구 순이었다. 파종용기에 따른 묘의 크기는 정식 후의 개화율에 유의적인 차이가 없었다. 따라서, 둥근산꼬리풀의 재배는 플라스틱 화분 12호에 원예상토를 충진하여 162구 트레이에 셀당 6립 파종하여 생산된 유묘를 정식하는 것이 분화용 재배에 효과적인 것으로 생각된다. 한편, 재배에 이용되는 토양의 종류에 따른 비율 및 개화촉진 등의 추가적인 연구가 필요하다.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.38-44
• /
• 2019

This study was conducted to establish a domestic cultivation system of a newly introduced yam bean (Pachyrhizus erosus L.). Growth and yield were investigated in response to various cultural practices, such as seedling raising, planting distance, pinching, and flower pruning. Optimum conditions for raising of seedling were an average temperature of $22^{\circ}C$ for 30 days. Considering of the raising efficiency and the convenience of transplanting, 128 cells per tray was a suitable size. When pinching at a height of 120 cm from late July to early August, yield increased by 22% compared to no pinching. Flower pruning between late August and early September increased the number of tubers and tuber yield by 32% in comparison with no flower pruning. Yam bean seedlings planted at $50cm{\times}30cm$ spacing resulted in 30% yield increase as compared to wider spacing of $100cm{\times}30cm$. Our results thus suggested that the optimal combination of cultural practices ($50{\times}30cm$ planting distance, pinching at 120 cm height, and one time of flower pruning) increase profitability by 107%. All these results suggest high possibility of yam bean as a new income crop in Korea.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.42-48
• /
• 2021

Zn and Al added LiNi0.85Co0.15O2 cathode materials were synthesized to improve electrochemical properties and thermal stability using a solid-state route. Crystal structure, particle size and surface shape of the synthesized cathode materials was measured using XRD (X-ray diffraction) and SEM (scanning electron microscopy). CV (cyclic voltammetry), first charge-discharge profiles, rate capability, and cycle life were measured using battery cycler (Maccor, series 4000). Strong binding energy of Al-O bond enhanced structure stability of cathode material. Electrochemical properties were improved by preventing cation mixing between Li+ and Ni2+. Large ion radius of Zn+ increased lattice parameter of NC cathode material, which meant unit-cell volume was expanded. NCZA25 showed 80% of capacity retention at 0.5 C-rate during 100 cycles, which was 12% higher than that of NC cathode. The discharge capacity of NCZA25 showed 104 mAh/g at 5 C-rate. NCZA25 achieved 36 mAh/g more capacity than that of NC cathod. NCZA25 cathode material showed excellent rate capability and cycling performance.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.625-633
• /
• 2021

This paper describes a scalable architecture for flexible hardware implementation of Montgomery modular multiplication. Our scalable modular multiplier architecture, which is based on a one-dimensional array of processing elements (PEs), performs word parallel operation and allows us to adjust computational performance and hardware complexity depending on the number of PEs used, N_PE. Based on the proposed architecture, we designed a scalable Montgomery modular multiplier (sMM) core supporting eight field sizes defined in SEC2. Synthesized with 180-nm CMOS cell library, our sMM core was implemented with 38,317 gate equivalents (GEs) and 139,390 GEs for N_PE=1 and N_PE=8, respectively. When operating with a 100 MHz clock, it was evaluated that 256-bit modular multiplications of 0.57 million times/sec for N_PE=1 and 3.5 million times/sec for N_PE=8 can be computed. Our sMM core has the advantage of enabling an optimized implementation by determining the number of PEs to be used in consideration of computational performance and hardware resources required in application fields, and it can be used as an IP (intellectual property) in scalable hardware design of elliptic curve cryptography (ECC).

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.50-57
• /
• 2022

Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 60 nm showed a transmittance of 86.5% at 650 nm and a sheet resistance of 8.1 Ω/□. The multilayer films were expected to be applicable for use in energy-saving smart window based on polymer-dispersed liquid crystal (PDLC) because of their transmittance properties to effectively block infrared rays (heat rays). We investigated the effects of the content ratio of prepolymer, the thickness of the PDLC coating layer, and the ultraviolet (UV) light intensity on electro-optical properties, and the surface morphology of polyester acrylate-based PDLC systems using new TIZO/Ag/TIZO transparent conducting electrodes. A PDLC cell with a thickness of 15 ㎛ PDLC layer photocured at an UV intensity of 1.5 mW/cm² exhibited good driving voltage, favorable on-state transmittance, and excellent off-haze. The LC droplets formed on the surface of the polymer matrix of the PDLC composite had a size range of 1 to 3 ㎛ capable of efficiently scattering incident light. Also, the PDLC-based smart window manufactured using TIZO/Ag/TIZO multi-layered transparent electrodes in this study exhibited a light brown, which will have an advantage in terms of aesthetics.