• Title/Summary/Keyword: 셀 상태

Search Result 450, Processing Time 0.05 seconds

Traffic Flow Control of B-NT for Prevention of Congestion in B-ISDN UNI (B-ISDN UNI에서 폭주를 예방하기 위한 B-NT의 트래픽 흐름 제어)

  • 이숭희;최흥문
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.6
    • /
    • pp.1085-1094
    • /
    • 1994
  • We propose a traffic flow control scheme of B-NT with temporary cell buffering and selective cell discarding to prevent congestion state of the network nodes in B-ISDN systems to reduce or suppress output cell strams towards T interface. We define the states of the network nodes as normal, pre-congestion, and congestion. In a pre-congestion state, the loss-sensitive traffic is temporarily buffered to slow down the rate of the output traffic streams. In a congestion state, the delay-sensitive traffic is selectively discarded to suppress the output traffic streams as possible in addition to the cell buffering. We model the input cell streams and the states of the network nodes with Interrupted Bernoulli Process and 3-state Markov chain to analyze the performance of the proposed scheme in the B-NT system. The appropriate size of the cell buffer is explored by means of simulation and the influence on the performance of the proposed scheme by the network node state is discussed. As results, more than 2,00 cells of buffer size is needed for the control of medium of lower than the medium, degree of congestion occurrence in the network node while the control of high degree of congestion occurrence is nearly impossible.

  • PDF

A Study on Behavior of Cell Fabricated by Sputtering for Phase Change Memory (스퍼터링을 통해 제작된 상변화 메모리용 셀의 I-V 거동 연구)

  • Baek, Seung-Cheol;Song, Ki-Ho;Lee, Hyun-Yong
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.06a
    • /
    • pp.55-55
    • /
    • 2010
  • 상변화 메모리용 셀은 전류 구동형으로써 셀에 전류를 인가하였을 때 저항이 높은 상태(비정질상)과 저항이 낮은 상태(결정질상)의 두가지 특성을 갖는다. 저항이 높은 상태에서 전류나 전압을 인가하면 높은 저항을 보이다가 일정 값(threshold voltage) 이상에서 낮은 저항을 갖는 현상을 보인다. 이때 상변화물질의 종류 혹은 셀의 사이즈에 따라 threshold voltage의 차이가 나타나는데 이 값을 줄임으로서 상변화 메모리의 구동 전류의 감소에 기여할 수 있다. 본 연구에서는 스퍼터링 방법을 이용해 박막형식의 셀을 제작하여 전기적 특성을 관찰하였다. 셀은 Si 기판 위에 radio frequency power supply 와 direct current power supply를 사용해 하부전극과 상변화층, 그리고 상부전극의 순으로 증착하여 제작하였다. 상변화층은 $Ge_2Sb_2Te_5$를 사용하였고 제작된 셀은 scanning electon microscope(SEM)를 이용하여 표면의 상태를 확인하였고 Keithley 4200scs를 이용하여 인가된 전류 혹은 전압에 따른 특성변화를 측정하였다.

  • PDF

Charge trap flash 메모리 소자의 셀 간 간격의 변화에 따른 셀 사이의 간섭 현상

  • Park, Hun-Min;Jang, Sang-Hyeon;Yu, Ju-Hyeong;Kim, Tae-Hwan
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.194-194
    • /
    • 2010
  • Charge trap flash (CTF) 구조를 가진 플래시 메모리 소자는 기존의 플래시 메모리 소자에 비해 쓰고 지우는 속도가 빠르고, 데이터의 저장 기간이 길며, 쓰고 지우는 동작에 의한 전계 스트레스에 잘 견디는 장점을 가지고 있다. 이러한 장점에도 불구하고 CTF 플래시 메모리에서도 수십 나노 이하로 소자의 셀 사이즈가 감소함에 따라 단 채널 효과, 펀치스루 현상 및 셀 사이의 간섭현상이 발생함에 따라 이러한 문제들을 해결해야 한다. 인접한 셀 사이에 발생하는 간섭 현상에 대해선 플로팅 게이트를 사용한 플래시 메모리 소자에 대하여 많은 연구가 진행되었으나, CTF 플래시 메모리 소자에서 나타나는 셀 사이의 간섭현상에 대한 연구는 만히 진행되어 있지 않다. 본 연구에서는 CTF 플래시 메모리 소자의 셀 사이의 간격이 작아짐에 따라 발생하는 인접한 셀 간의 간섭 현상에 대해 관찰하였다. CTF 플래시 메모리 소자의 셀 사이의 간격에 따른 비교를 위하여 각 소자의 셀을 구성하는 터널링 산화막, 질화막 및 블로킹 산화막의 두께를 동일하게 하였다. 각 셀 사이의 간격이 감소함에 따라 발생하는 소자의 전기적 특성을 TCAD 시뮬레이션 툴인 Sentaurus를 사용하여 계산하였다. 인접한 셀의 상태에 따라 발생하는 간섭 효과를 확인하기 위해 word line (WL)과 bit line (BL) 방향에 있는 주변 셀의 프로그램 상태에 따른 선택한 셀의 문턱전압이 변화 정도를 관찰하였다. 시뮬레이션 결과는 셀 사이의 간섭효과가 WL 방향에 의한 간섭 현상보다 BL 방향에 의한 간섭 현상보다 크다. 시뮬레이션한 전류-전압 특성 결과는 CTF 플래시 메모리 소자가 비례 축소할 때 인접하는 셀 사이에 간격이 15 nm 이하로 줄어들 경우에 간섭 현상이 급격히 증가하였다.

  • PDF

Data Scrambling Scheme that Controls Code Density with Data Occurrence Frequency (데이터 출현 빈도를 이용하여 코드 밀도를 조절하는 데이터 스크램블링 기법)

  • Hyun, Choulseung;Jeong, Gwanil;You, Soowon;Lee, Donghee
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.10 no.9
    • /
    • pp.235-242
    • /
    • 2021
  • Most data scrambling schemes generate pure random codes. Unlike these schemes, we propose a variable density scrambling scheme (VDSC) that differentiates densities of generated codes. First, we describe conditions and methods to translate plain codes to cipher codes with different densities. Then we apply the VDSC to flash memory such that preferred cell states occur more than others. To restrain error rate, specifically, the VDSC controls code densities so as to increase the ratio of center state among all possible cell states in flash memory. Scrambling experiments of data in Windows and Linux systems show that the VDSC increases the ratio of cells having near-center states in flash memory.

The development of controller for lithium-ion battery of electric vehicle (전기자동차용 리튬이온 배터리 제어를 위한 제어기 개발)

  • Cho, Sebong;Hong, Hyunju;Jeon, Ywunseok
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.11a
    • /
    • pp.96.2-96.2
    • /
    • 2010
  • EV(Electric Vehicle) 차량에서 BMS(Battery Management System) 은 모터에 공급되는 고전압 배터리의 충전상태를 감지하여 VCU(Vehicle Control Unit)에 전송하게 된다. VCU에서는 배터리의 충전상태를 확인하여 모터 구동 전략을 수립하여 각 제어기에 전송하게 된다. 위와 같이 EV에서 배터리 충전상태를 정확하게 감지하지 못한다면, 모터 구동을 위한 전략 수립에 많은 제약이 따르게 된다. 정확한 배터리 충전 상태를 감지하기 위해서는 배터리 각 셀의 전압/전류/온도 등을 측정하여 연산에 의해 결정된다. 그 중 셀 전압 측정 방식은 Photomos relay를 이용한 방식으로 하드웨어적인 오차에 ${\pm}$수십mV보다 더둑 더 정밀하게 측정할 수 있는 방법이 없었다. 하지만, 셀 전압 측정 정밀도를 향상시키기 위해 신규로 개발된 battery monitoring IC를 이용한 BMS의 H/W 개발에 대해 설명할 것이다. 또한, Monitoring IC를 이용한 BMS의 셀 전압 측정 정밀도를 얼마나 개선시킬 수 있는지에 대해 연구하였다.

  • PDF

Electro-Optic Characteristics of Polymer Dispersed Liquid Crystal Cell with Transparent State Initially (초기에 투명한 상태인 고분자 분산형 액정셀의 전기 광학 특성)

  • 김미숙;원해경;송성훈;이명훈;이승희
    • Polymer(Korea)
    • /
    • v.28 no.4
    • /
    • pp.298-304
    • /
    • 2004
  • We fabricated a polymer dispersed liquid crystal (PDLC) cell using LC with negative dielectric anisotropy and UV curable monomer exhibiting transparent state initially (called normally transparent (NT)) and studied the electro-optic characteristics. The NT PDLC cell made with the ratio of LC : monomer = 70/30 wt%, curing temperature of 20 $^{\circ}C$ and strong UV intensity of 198 ㎽/$\textrm{cm}^2$ had high contrast ratio and showed good electro-optic characteristics. In this condition, LC is aligned vertically on the substrate due to the vertical alignment layer and the polymer made with the UV exposure does not influence the alignment of the LC much. Therefore, the transmittance at the zero voltage is very high and the scattering state of the cell is good after applying the voltage because LC with negative dielectric anisotropy tries to align perpendicular to the field. And also, the NT PDLC cell showed better viewing angle characteristics than that in the normally scattering (NS) PDLC.

Analysis of Slope Stability using Cell Unit Evaluation (셀 단위 평가법을 이용한 사면의 안정성 평가)

  • Jang, Bo-An;Poong, Bo-Hyun;Jang, Hyun-Shic
    • The Journal of Engineering Geology
    • /
    • v.18 no.4
    • /
    • pp.405-414
    • /
    • 2008
  • When we evaluate slope stability, we regard the slope homogeneous and evaluate slope stability at the most dangerous portion of slope. However, since conditions and properties of rock mass/soil are different from one location to another within a single slope, slope stability evaluated by current concept can not represent slope correctly. This also result in over-reinforcement at the portion where reinforcement is not necessary. In order to solve these problems, we suggest a cell unit evaluation method in which we apply small rectangular cells in a slope and regard each cell as a single slope. In this method, slopes are classified into soil slope and rock slope depending on materials. Strength of rock, volumetric joint count, spacing of joints, condition of joints, ground water condition and so on are examined and SMR and condition index values are calculated. Finally, all data and results are presented as contour maps. We apply the cell unit evaluation method into 3 cut slopes. SMR values estimated by the new method are larger than those by current concept at most portions of slope, indicating that the new method suggested by this research represent slope stability more correctly than methods which were used. This method will prevent over-reinforcement at the portion of slope where reinforcement is not necessary.

Adaptive Distributed Call Admission Control for Multimedia Serviced in Multi-Cell Environment (멀티 셀 환경에서 멀티미디어 서비스 지원을 위한 적응적인 분산 호 수락 제어 기법)

  • 원정재;김대익;이형우;조충호
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1998.10a
    • /
    • pp.237-239
    • /
    • 1998
  • ATM 망에서 이루어지는 다양한 멀티미디어 서비스를 무선 ATM망에서 지우너하기 위해서는, 단말의 이동에 위해 핸드오프가 일어날 때, 주위 셀의 상태와 다양한 클래스의 트래픽 특성을 고려한 무선 호 수락 제어 문제가 해결되어야 한다. 본 논문에서는 셀수준(cell-level)에서 인접 셀의 상태 정보를 이용한 분산 호 수락제어기법(DCA)과 현재 무선 셀에서 발생하는 클래스별 호들에 대한 할당을 위한 자원공유 알고리즘인 Ra방식을 조합하여 멀티 셀 환경에서 멀티 클래스 서비스별 QoS를 고려한 적응적인 무선화 수락제어 기법인 RA-DCA기법을 제안한다. 또한 제안된 호 수락 제어 기법의 성능분석을 위한 모델과 시뮬레이션 결과를 분석하였다.

  • PDF

Selenium Status of Healthy Women Consuming Different Diets (식이에 따른 건강한 성인 여자의 셀레늄의 영양 상태)

  • Huh Chai Ok
    • Journal of Nutrition and Health
    • /
    • v.26 no.7
    • /
    • pp.899-906
    • /
    • 1993
  • Human blood selenicum(Se) level depends on the Se content and bioavailablilty of foods. In countries where the soil has low Se content, the differences of Se intake and blood Se concentration are shown according to the type of diet. In this study, Se status of women eating an average German diet(175 German healthy women) and wholesome nutrition group(243 women) were studied. There were significant differences in wholeblood and plasma Se levels between the two groups. In average German diet group, mean wholeblood Se concentration was 84.97ug/l and plasma Se concentration was 75.02ug/l. In wholesome nutrition group mean wholeblood Se concentration and plasma Se concentration with Se levels, correlation analysis was conducted between Se concentration and BMI, age and daily food intake. BMI and age did not correlate significantly with wholeblood and plasma Se levels. In wholesome nutrition group, serum and wholeblood Se levels had significant correlation with fish intake.

  • PDF

Enhanced Mobility Management Mechanism in IP based-IMT Network Platform($IP^2$) (IP 기반-IMT 네트워크에서의 이동관리 메카니즘 향상기법)

  • Jung, Byeong-Hwa;Park, Soo-Hyun
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2005.05a
    • /
    • pp.1307-1310
    • /
    • 2005
  • $IP^2$(IP based-IMT Network Platform)은 유비쿼터스 플랫폼으로서 백본 망에서 IP 를 IPha(IP host address)와 IPra(IP routing address)으로 두 가지를 사용하여서 이동성을 지원한다. 그리고 MN(Mobile Node)도 Active 상태와 Dormant 상태로 두 가지 상태로 나뉘는데 Dormant 상태에서 상대방이 통신을 요청하면 페이징(Paging) 과정을 통해서 Active 상태로 전이된다. 페이징을 할 때 LA(Location Area)에 속해있는 모든 셀(Cell)에 페이징 메시지를 전송하게 됨으로서 네트워크의 자원을 과도하게 사용하게 된다. 이것을 해결하기 위해서 프럭시(Proxy) 를 두는 방안을 제안하였다. 프럭시에서 MN 들이 존재하는 셀 정보를 유지 함으로서 페이징 요청이 있을 때 정확한 셀에 메시지를 전송하게 되기 때문에 네트워크 자원의 낭비를 줄일 수 있다.

  • PDF