• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.9
• /
• pp.235-242
• /
• 2021

Most data scrambling schemes generate pure random codes. Unlike these schemes, we propose a variable density scrambling scheme (VDSC) that differentiates densities of generated codes. First, we describe conditions and methods to translate plain codes to cipher codes with different densities. Then we apply the VDSC to flash memory such that preferred cell states occur more than others. To restrain error rate, specifically, the VDSC controls code densities so as to increase the ratio of center state among all possible cell states in flash memory. Scrambling experiments of data in Windows and Linux systems show that the VDSC increases the ratio of cells having near-center states in flash memory.

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.56-61
• /
• 2019

In this paper, we studied efficient modeling strategies when we simulate the 3D time-domain acoustic wave propagation using a cell-based finite difference method which can handle the variations of both P-wave velocity and density. The standard finite difference method assigns physical properties such as velocities of elastic waves and density to grid points; on the other hand, the cell-based finite difference method assigns physical properties to cells between grid points. The cell-based finite difference method uses average physical properties of adjacent cells to calculate the finite difference equation centered at a grid point. This feature increases the computational cost of the cell-based finite difference method compared to the standard finite different method. In this study, we used additional memory to mitigate the computational overburden and thus reduced the calculation time by more than 30 %. Furthermore, we were able to enhance the performance of the modeling on several media with limited density variations by using the cell-based and standard finite difference methods together.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.127-143
• /
• 2016

This study explored the variability in the accuracy of dasymetric population estimation with different grid cell sizes. Dasymetric population maps for Fulton County, Georgia in the US were generated from 30m to 420m at intervals of 30m using an automated intelligent dasymetric mapping technique, population data, and original and simulated land use and cover data. The accuracies of dasymetric population maps were evaluated using RMSE and adjusted RMSE statistics. Lumped fractal dimension values were calculated for the dasymetric population maps generated from resolutions of 30m to 420m using the triangular prism surface area (TPSA) method. The results show that a grid cell size of 210m or smaller is required to estimate population more accurately in terms of thematic accuracy, but a grid cell size of 30m is required to meet an acceptable spatial accuracy of dasymetric population estimation in the study area. The fractal analysis also indicates that a grid cell size of 120m is the optimal resolution for dasymetric population estimation in the study area.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.135-143
• /
• 1990

A new over-the-cell routing system is proposed in this paper. The proposed system efficiently reduces not only the channel density but also the routing density in cell region. Generally, the over-the-cell system consists of three phases. Namely, over-the-cell routing, terminal selection and channel routing. In this paper, to select the nets to be routed over the cells, weights are assigned on the intersection graph considering both the channel density and the intersection relations among other nets. When selected nets are blocked by feedthroughs or metal layers for internal logic, they are routed by maze algorithm. Also, in order to reduce channel density, the terminals to be routed in a channel are selected using the minimum weight spanning tree. Channel routing is carried out with a channel router of HAN-LACAD_G. The effectiveness of the over-the-cell routing system is shown by the experiments with benchmark data and its application to the gate array layout system.

• Elastomers and Composites
• /
• v.36 no.1
• /
• pp.52-60
• /
• 2001

Physical properties of foams depend on the density of foams, Physical properties of base polymers, open ceil contents, and cell structures including the size, size distribution, shape of ceil and the thickness of membrane and strut. The density of foam is affected by raw materials, concentration oi crosslinking agent and blowing agent and process parameters such as processing technique and condition. Ethylene vinyl acetate copolymer(EVA) foam is a crosslinked cellular material. The foaming characteristics and physical properties of EVA foam are affected by decomposition rate of blowing agent. In this study, the decomposition rate of blowing agent and crosslinking rate, foaming characteristics and physical properties of foams were evaluated. The slow decomposition rate of blowing agent results in low density foam, good shock absorption property and uniform cell size distribution compared to the high decomposition rate of blowing agent.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2010

The physical properties of polymeric foams depend on the density of foams, physical properties of base polymers, the content of open cells, and cell structures including the size and its distribution, the shape of cell, and the thickness of skin layer. The foam density is affected by the chemistry of raw materials, the concentration of crosslinking agent and the blowing agent as well as the operating parameters during production process. In this study, the basic formulations of foams are composed of polyester polyol, MDI, amine catalyst, tin catalyst, silicone surfactant, and water. Cross-linking density of polyurethane was increased by using chain extenders. Also, the mechanical properties of polyurethane foam were improved by using the inorganic fillers (silica 1,2 and talc 1,2) having different $SiO_2$ contents and particle sizes. We investigated the properties of modulus, tensile strength, compressive strength and hardness of foams obtained by changing kind of inorganic filler and chain extender, and observed the distribution of inorganic filler as well as variation of cell size within the foams by electron microscopy.

• Electronics and Telecommunications Trends
• /
• v.31 no.1
• /
• pp.36-44
• /
• 2016

5G에서는 광대역 서비스뿐만 아니라 저지연 및 신뢰성 보장 서비스 등 새로운 서비스들을 정의하고 있으며 이를 제공하기 위한 다양한 후보 기술에 대한 논의가 이루어지고 있다. 5G에서는 기지국의 셀 크기가 작은 스몰셀 기지국을 기반으로 대규모 데이터 트래픽을 수용하기 위하여 밀집한 형태의 셀 구조를 가지며 각 기지국의 셀들은 무선전송방식도 서로 다를 수 있을 것으로 예상된다. 이러한 밀집한 형태의 소형셀은 5G의 핵심 기술요소의 하나로 고려되고 있다. 5G 소형셀 연구는 5G 핵심 제공능력 중 단위 면적당 트래픽 용량 증대, 사용자 체감 전송률 증대, 에너지 절감에 기여하며 부가적으로 지연 절감과 연결 밀도 증대에도 기여할 수 있는 분야이다.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.126-127
• /
• 2003

원예산물의 밀도나 비중은 내부성분, 숙도, 내부붕괴(internal breakdown)와 같은 생리장해에 큰 영향을 받기 때문에, 밀도를 측정함으로써 내부품질에 대한 간접적인 판정이 가능하다고 보고되고 있다. 이 연구는 수박의 밀도와 당도와의 상관관계를 구명하고자 수행하였으며, 이를 위해 밀도의 실시간 계측시스템을 개발하였다. 현재 농산물의 밀도를 어느 정도 측정 정밀도를 유지하면서도 신속하게 측정할 수 있는 방법은 부력법(platform scale method)이다. 이 방법은 일정 크기의 용기에 물을 가득 채운 후 대상물을 담가 배제된 물의 무게를 측정하여 밀도를 환산한다. 그러나 매번 측정할 때마다 물을 보충하고, 물을 계량해야하는 등 전처리과정이 복잡하고, 1회 측정하는데 3~5분 정도가 소요되는 단점이 있고, 또한 인력 측정시 반복간 오차가 클 것으로 예상된다. 따라서 이 연구에서는 이 같은 계측상의 번거로움을 해소하고 동시에 신속하고 반복간 측정정밀도를 높일 수 있도록 수박 밀도 실시간 계측시스템을 설계 제작하였다. 시스템은 투명아크릴 수조($\Phi$400$\times$500), 로드셀, 프레임, 채반, 전기모터, 제어장치 및 컴퓨터로 구성하였다. 밀도 계측은 인장형 로드셀(CAS SB-20L, Max. 20kg)을 사용하여 대기중에서와 수박을 완전히 물에 잠기도록 한 후 무게를 각각 측정하여 밀도를 환산하였다. 밀도 계측시스템에 이용한 AD변환기의 분해능은 12bit이고, 수박의 무게 측정범위를 4~10kg로 가정할 때 20kg 로드셀의 1 digit(1bit)로 발생되는 오차는 0.09~0.24%FS 이었고, 따라서 이 시스템의 밀도 해상도는 0.001g/㎤이하였다. 시스템 평가를 위해 탄력이 좋은 고무풍선에 수박 크기 정도로 물을 채워 고정채반에 넣고 밀도를 측정한 결과 1.002g/㎤을 나타냈다. 즉 물의 이론밀도인 1g/㎤에 근접한 값을 보여 정확한 밀도 계측이 가능한 것으로 판단되었다. 또한 밀도 계측시스템의 측정 반복간 정밀도를 파악하기 위해 수박 6개를 임으로 선정하여 3반복 측정 시험한 결과, 측정표준편차가 0.001~0.004g/㎤로 해상도보다는 다소 높았으나 대체로 양호한 결과를 나타냈다. 수박 35개를 이용하여 개발 계측시스템과 사람이 직접 부력법으로 밀도를 측정 비교한 결과, 계측시스템에 의해 측정된 수박 밀도가 사람이 측정했을 때 보다 낮게 측정되었다. 수박의 외관인자(무게, 길이, 직경, 체적), 밀도와 당도의 상관관계 구명시험을 위해 원예연구소 시험포장에서 재배된 삼복꿀수박 총 74개를 공시재료로 하였고, 시험은 출수일별로 10~14개씩 수확하여 외관인자, 밀도, 당도를 각각 측정하고, 이들 인자들간의 상관관계를 구명하였다. 외관인자들간에는 높은 상관관계를 보였으나, 외관인자들과 밀도, 외관인자들과 당도, 밀도와 당도와는 매우 낮은 상관관계를 나타냈다.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.538-544
• /
• 2000

The characteristics of cell growth and foamed cell structures of PP were investigated by a continuous foaming process. The operating parameters were the contents of blowing agent and nucleating agent, nucleating agent contents, die temperatures and die dimensions. The foaming cells grew without collapse at less than 14.5 wt% of blowing agent, isopentane. But the cells were collapsed when the blowing agent content was more than 14.5 wt%. The foam density dramatically decreased when a very small amount of the nucleating agent, 1 wt%, was added. After the nucleating agent was added, the cell's weight plummeted to one-seventh of its previous weight. Stable foam cell structures were formed at the die temperature of 17$0^{\circ}C$. However, the effects of the pressure drop rate on the cell morphology were not serious.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.115-123
• /
• 2007

This paper presents the conceptual design of the electrical power system using Li-ion cell technology for a satellite application. Compared to a conventional NiCd cell, a Li-ion cell has a lot of advantages such as an energy density, mass and a volume. Normally, a Li-ion cell has three times than conventional NiCd cells in a capacity such as a cell voltage. The normal voltage of a NiCd cell is around +1.2V and a Li-ion cell could be in +3.6V. However, the handling procedure for a Li-ion cell in charge and discharge might be difficult than a conventional NiCd cell, which means that the charge and discharge of each cell should be monitored and controlled by electrical circuits to prevent an over-charge and over-discharge. Therefore, in this paper we propose the design consideration and the characteristics of a Li-ion cell during charging and discharging battery packs in the point of view of electrical power system.