• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.81-87
• /
• 2007

It is important to investigate the relationship between weld process parameters and weld bead geometry for adaptive arc robot welding. However, it is difficult to predict an exact back-bead owing to gap in process of butt welding. In this paper, the quantitative prediction system to specify the relationship external weld conditions and weld bead geometry was developed to get suitable back-bead in butt welding which is widely applied on industrial field. Multiple regression analysis and artificial neural network were used as the research methods. And, the results of two prediction methods were compared and analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1958-1959
• /
• 2006

This paper proposes a local path-planning algorithm that enables a mobile robot with vision sensor in a local area.The proposed method based on projective geometry and a wavefront method finds local-paths to avoid collisions using 3-D walls or obstacles map generated using projective geometry. Simulation results show the feasibility of the proposed method

• 한국정보과학회논문지:시스템및이론
• /
• 제35권8호
• /
• pp.385-393
• /
• 2008

사용자가 가능한 센서 가까이에서 이동하는 문제를 최단거리유지 문제(Best Coverage Problem)라 하며, 무선 연결의 안정성을 높이기 위해서 두 개의 센서로부터 최대한 가까이 위치하며 움직이는 이동경로를 차선거리유지 경로(Second Best Coverage Path)라고 한다. 이 논문에서는 센서들의 집합 U와 시작점 s, 끝점 t가 주어질 때, s에서 t까지 이르는 모든 경로 중에서, 가장 가까운 두 개의 센서까지 거리 중 큰 값이 최소가 되는 차선거리유지 경로를 찾는 O(n logn)-시간 알고리즘을 제시하며, 차선거리유지 경로를 따라 움직일 때가 최단거리유지 경로를 따라 움직일 때 보다, 네트워크에의 연결이 보다 안정적임을 보여주는 실험결과도 또한 제시한다.

• 한국음향학회지
• /
• 제19권7호
• /
• pp.7-14
• /
• 2000

본 논문에서는 바닥고정형 선배열센서를 이용하여 다중경로 신호를 이용한 근거리표적의 위치추정 알고리즘을 제안하였다. 다중경로를 통하여 근거리 표적의 신호가 센서에 도달하는 경우 각 신호의 원추각이 다르므로 신호들의 원추각과 시간차를 추정해서 3차원 표적의 위치를 추정할 수 있다. 원거리표적으로 가정하고 추정한 원추각과 신호들의 시간차에 대한 관계식을 유도하였으며 이들을 연립하여 표적의 위치를 추정하였다. 그러나 표적이 위치한 기하학적인 위치에 따라 신호들의 원추각이 거의 같아지는 지점이 존재한다. 이 경우 부가적인 1차원 탐색으로 표적의 위치를 추정하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.25-28
• /
• 2005

The optical fiber is known for the proper sensor which can accomplish the structural health monitoring, Fiber Bragg Grating sensors are being studied more than any other fiber optic sensors due to good multiplexing capabilities. But because the signal stability of FBG sensors can be influenced by the strain gradient, it needs to analyze signal of FBG sensors. Particularly acoording to strain gradient induced by structural geometry or cracks, the spectrum peak of the FBG sensor signal can be split easily. In this paper, the spectrum analysis of the FBG sensor signal was performed and the region of embedment of FBG sensors was determined in $H_2$ pressure vessel by numerical method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.466-469
• /
• 2002

Burr is a projected part of finished workpiece. It is unavoidable and undesirable by-product of most metal cutting or shearing process. Also, it must be removed to improve the fit of machined parts, safety of workers, and the effectiveness of finishing operation. But deburring process is one of manufacturing processes that have net been successfully automated, so deburring automation is strongly needed. This paper focused on developing a basic algorithm to find edge of workpiece and match two different image data for deburring automation which includes automatic recognition of parts, generation of deburring tool paths and edge/corner finding ability by analyzing the DXF drawing file which contains information of part geometry. As an algorithm for corner finding, SUSAN method was chosen. It makes good performance in finding edge and corner in suitable time. And this paper suggested a simple algorithm to find matching point between CCD image and drawing file.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.548-553
• /
• 2000

A new design of cylindrical capacitive sensor(CCS) for the displacement measurement of precision active magnetic bearing(AMB) spindle is presented in this paper. This research is motivated by the problem that existing 4-segment CCS is still sensitive to the $3^{rd}$ harmonic component of the geometric errors of a rotor. The procedure of designing new CCS starts from the modeling and error analysis of CCS. The angular size of CCS is set up as a design parameter, and new 8-segment CCS is introduced to possess an arbitrary angular size. The optimum geometry of CCS to minimize the effect of geometric errors is determined through minimum norm approach. Experimental results with test rotors have confirmed the improvement in geometric error suppression.

• 센서학회지
• /
• 제32권5호
• /
• pp.300-306
• /
• 2023

A hull-cleaning robot sticks to the surface of a vessel and moves for efficient cleaning. Precise path planning and tracking using the current position is crucial. Many robots rely on the INS algorithm, but errors accumulate. To fix this, GPS, sonar, and USBL are used, though with limitations. Selecting suitable sensors for the surface operation and accurate positioning algorithm are vital. In this study, we developed a robot position estimation algorithm using the structure of a ship. Problems that arise when expanding the 2D position estimation algorithm used in existing wall structures to 3D were evaluated and methods for solving them were proposed. In addition, we aimed to improve performance by deriving singularities that exist in the robot path and proposing an error correction algorithm based on the singularities.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.891-897
• /
• 2008

GPS는 정밀한 상대 항법 정보를 제공해 줄 수 있으나 해당 지역에 기준국이 설치되어 있어야 하고 위성 관측 환경에 영향을 받는다는 단점이 있다. 본 논문에서는 이러한 GPS 단독 사용 시의 한계를 극복하기 위해 사전에 알고 있는 랜드 마크의 기하학적인 배열을 이용한 INS/비전 센서 통합 시스템을 제안한다. 제안된 방법은 사전에 그려진 랜드 마크의 이미지만 있으면 GPS 기준국 없이도 상대 항법 정보를 제공할 수 있다. 제안된 시스템은 간단한 시뮬레이션에 의해 성능을 검증하였으며, 이러한 결과 상대 항법 정보를 향상 시킬 수 있음을 확인하였다.

• 센서학회지
• /
• 제14권2호
• /
• pp.116-124
• /
• 2005

In this paper range measurement systems are designed using an ultrasonic sensor and a camera. An ultrasonic sensor provides the range measurement to a target quickly and simply but its low resolution is a disadvantage. We tackle this problem by employing a camera. Instead using a stereoscopic sensor, which is widely used for 3D sensing but requires a computationally intensive stereo matching, the range is measured by focusing and structured lighting. In focusing a straightforward focusing measure named as MMDH(min-max difference in histogram) is proposed and compared with existing techniques. In the method of structure lighting, light stripes projected by a beam projector are used. Compared to those using a laser beam projector, the designed system can be constructed easily in a low-budget. The system equation is derived by analysing the sensor geometry. A sensing scenario using the systems designed is in two steps. First, when better accuracy is required, measurements by ultrasonic sensing and focusing of a camera are fused by MLE(maximum likelihood estimation). Second, when the target is in a range of particular interest, a range map of the target scene is obtained by using structured lighting technique. The systems designed showed measurement accuracy up to 0.3[mm] approximately in experiments.