• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.534-537
• /
• 2009

Clustering protocol of Wireless sensor networks(WSNs) can not only reduce the volume of inter-node communication by the nodes's data aggregation but also extend the nodes's sleep times by cluster head's TDMA-schedule coordination. In order to extend the network lifetime of WSNs, we propose CHS algorithm to select cluster-head using three variables. It consists of initial and current energy of nodes, round information, and total numbers which have been selected as cluster head until current round.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.569-575
• /
• 2007

The main issue of this study is to find ways to lengthen the lifetime of network mainly by reducing energy consumption. This paper proposes how to reduce the amount of data transmitted in each sensor and cluster head in order to lengthen the lifetime of sensor network. The most important factor of reducing the sensor's energy dissipation is to reduce the amount of messages transmitted. This study proposes cluster cohesion for the purposes. The method is to use the cluster cohesion and manage the number of clusters adaptively and reduce the amount of message transmitted in network topology. This method should be much more efficient and effective as it reduces the network traffic significantly and increases the network's lifetime.

• Journal of Sensor Science and Technology
• /
• v.8 no.2
• /
• pp.108-114
• /
• 1999

Surface acoustic wave (SAW) device is very attractive for gas sensor applications because of their small size, low cost, high sensitivity, and good reliability. A dual delay line surface acoustic wave $NO_2$ gas sensors have been designed and fabricated on the $LiTaO_3$ piezoelectric single crystal substrate. The capacitance of the fabricated IDTs was 326.34pF at the frequency of 79.3MHz. The maximum reflection loss of the impedence-matched IDTs was -16.74dB at the frequency of 79.3MHz. The SAW oscillator was constructed and the stable oscillation was obtained by controlling the gain of rf amplifier properly. The oscillation frequency shift of the SAW oscillator to the $NO_2$ gas was 28Hz/ppm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.68-73
• /
• 2003

This paper describes a newly developed vector drive system without the speed sensor using theory of a flus observer and based on the field oriented vector control. The new method of speed estimation is presented to operate with the position and magnitude of the secondary flux vector which obtain to the observer md detected current. As the speed of estimation is determined to the flux and the motor constants, this method don't need to adjust the gain of the parameter and is operated simply. On basic the derived theory for vector control, sensorless speed control system for induction motor drive is design and realized. It is determined a controllers gain and observer gain by simulation and the experiment of sensorless vector drive is realized.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.295-302
• /
• 2010

This paper proposes a multiple access method based on Time Reversal Mirror (TRM) technique when the multiple sensor nodes exist. Proposed method increases system sum capacity using energy focusing effects of the TRM. Simulation results show that proposed algorithm obtains higher system sum capacity than Orthogonal Frequency Division Multiple Access (OFDMA), e.g., 27 bps/Hz higher than the OFDMA method when the number of sensor node is 30, the number of transducer is 8, and is SINR 16 dB.

• Journal of KIISE:Databases
• /
• v.32 no.4
• /
• pp.372-382
• /
• 2005

Aggregation such as computing an average value of data measured in each sensor commonly occurs in many applications of sensor networks. Since sensor networks consist of low-cost nodes with limited battery power, reducing energy consumption must be considered in order to achieve a long network lifetime. Reducing the amount of messages exchanged is the most important for saving energy. Earlier work has demonstrated the effectiveness of in-network data aggregation and data filtering for minimizing the amount of messages in sensor networks. In this paper, we propose an adaptive error adjustment scheme that is simpler, more effective and efficient than previous work. The proposed scheme is based on self-adjustment in each sensor node. We show through various experiments that our scheme reduces the network traffic significantly, and performs better than existing methods.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.1-6
• /
• 2007

Wireless Self-Powered Temperature Sensor for UHF Sensor Tags which are basic device for construction of ubiquitous sensor network is proposed. The key parameters of the target specification are resolution of $0.1\;^{\circ}C$ per output bit, below 1.5 V of operating voltage and below 5 uW of power consumption during sensing operation. Temperature sensor circuit consists of PTAT current generator, band gap reference circuit generating both reference voltage and current, Sigma-Delta Converter, and Digital Counter. Simulated maximum resolution was $0.23\;^{\circ}C/bit$ in 11-bit output. The proposed temperature sensor was fabricated by using a 0.25 m CMOS process. The chip area is $0.32\;{\times}\;0.22\;mm$ and the operating frequency is 2 MHz. Measured resolution from fabricated temperature sensor was $4\;^{\circ}C/bit$ in 8-bit output for the temperature range from $10^{\circ}C$ to $80^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2708-2715
• /
• 2012

This paper proposes a new sensorless speed control scheme of induction motor using Model Reference Adaptive Control and Direct Torque Control System. The Model Reference Adaptive Control System is based on the comparison between the outputs of Reference Model and Adjustable Model. The error between the estimated quantities obtained by the two models is used to drive a suitable adaptation mechanism which generates the estimated rotor speed for the Adjustable Model. And the Direct Torque Control scheme controls torque and flux by restricting the flux and torque errors within respective hysteresis bands, and motor torque and flux are controlled by the stator voltage space vector using optimum inverter switching table. The simulation results of proposed method indicate good speed responses from the low speed range to the high, and also show favorable characteristics of load operation.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.251-255
• /
• 2008

We have developed an electronic aids, called SmartWand, which can help visually impaired people walk safely and tell them an object's color and environmental brightness SmartWand can inform visually impaired people of the dangerous obstacles around which they can't notice by the white cane such as a large panel with supporting poles on the street. Especially we have lmproved the previous version of SmartWand by reflecting the result of user study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.389-392
• /
• 2007

In this paper, we propose an algorithm that improve network lifetime by adjusting cluster size according to location information of sensor node in wireless sensor network (WSN) using clustering technique. The sensed information in each cluster transfers to sink node through inter-cluster communications. Cluster head (CH) that nearby located in sink node much more spend own energy than far away CHs, because nearer CH forwards more data, so network lifetime is decreased. Proposed algorithm minimizes energy consumption in adjacent cluster to sink node by decreasing cluster site, and improve CH lifetime by distributing transmission paths. As a result of analysis, the proposed algorithm shows longer network lifetime in WSN.