• The Journal of Korean Institute of Information Technology
• /
• v.16 no.12
• /
• pp.31-40
• /
• 2018

We designed and implemented the attachable smart adapter for the general management of each company's agricultural machine regardless of whether it is equipped with a CAN (Controller Area Network) module. The smart adapter consists of a main board (Raspberry Pi3B), which operates agricultural machine's management software in Linux environment, and a self-developed interface board for power adjustment and status sensing. For the status monitoring, a sensing interface using a serial input was defined between the smart adapter and the sensors of the agricultural machine, and the state diagram of the agricultural machine was defined for diagnosis. We made a panel to simulate the sensors of the agricultural machine using the switch's on/off contact point, and confirmed the status monitoring and diagnostic functions by inputting each state of the farm machinery from the simulator panel.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.602-604
• /
• 2016

In this paper, we propose that it can control the interior lighting, LED and alarm clocks based on Bluetooth. The proposed 'Bluetooth based LED Alarm Lamp'may be an ON / OFF by using a Bluetooth module, by the light sensor and voltage transformers were designed to adjust the ON / OFF and light intensity. Also 7-segment display the clock, it was used a piezo-buzzer that designed to ring an alarm in time. And to decrease the voltage by using the touch sensor can adjust the light brightness. It was also added the ability to align the alarm. This piece (Bluetooth based LED Alarm Lamp) can provide a comfortable environment inside the room of a resident if the environment is dark when voltage is maintained to be ON automatic system. And designed with emphasis being able to improve the quality of sleep due to weak light.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.631-631
• /
• 2015

최근 데이터가 전략적 의사결정의 핵심요소로 대두됨에 따라 데이터 통합 및 데이터 품질에 대한 관심이 증대되고 있다. 특히, 데이터 품질을 확보하기 위해 데이터 표준화가 필수적으로 수반되어야 한다. 그러나 데이터 활용에 있어 (1)데이터의 중복 및 불일치 발생, (2)데이터에 대한 의미 파악 지연으로 정보 제공의 적시성 결여, (3)데이터 통합의 어려움, (4)정보시스템 변경 및 유지 보수 곤란 등과 같은 현실적인 문제점들이 정확한 정보를 적시에 사용자에게 전달하는데 장애 요인으로 발생하고 있는 실정이다. 따라서 본 연구에서는 '국토관측센서 기반 수문 및 수재해 정보포털시스템 개발'에 앞서 보다 정확한 데이터 통합관리 및 제공서비스가 가능하도록 국내외 사례연구를 통한 기반을 마련하고자 한다. 데이터 표준화는 시스템별로 산재해 있는 데이터 정보요소에 대한 명칭, 정의, 형식, 규칙에 대한 원칙을 수립하여 이를 전사적으로 적용하는 것을 의미하며, 이러한 데이터 표준화 작업은 데이터의 정확한 의미 파악뿐만 아니라 데이터에 대한 상반된 시각을 조정하는 역할을 수행한다. 기본적으로 데이터 모델 및 데이터베이스에서 정의할 수 있는 모든 오브젝트를 대상으로 하는 것이 이상적이나, 주로 관리해야 될 필요성이 있는 오브젝트만을 대상으로 데이터 표준화를 하는 것이 더욱 효율적으로 작용한다. 본 연구는 국내외 데이터 통합관리 표준화 동향을 제시하였으며, 현업 사용자로부터 데이터 표준과 관련된 요구사항을 수요조사를 통하여 조사함으로써 데이터 표준 대상 후보를 식별하고 개선점을 도출하는데 사용할 기반을 마련하였다. 데이터 표준화가 수행되면 현업 사용자는 정확한 데이터를 사용할 수 있고, 올바른 의사결정을 내릴 수 있을 것으로 판단된다. 앞으로 데이터 표준, 데이터 표준 준수 체크, 데이터 표준 조회 및 활용 등 데이터 표준 관리에서 수작업으로 인해 발생하는 애로사항을 배제하기 위해 자동화에 관한 연구가 지속적으로 추진되어야 할 것으로 사료된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.959-968
• /
• 2022

In this paper, we intend to develop a cart with the convenience of moving objects or items that are difficult to hold by the hand of the disabled and the elderly from outdoor activities to a moving location. Using GPS module, DC motor, Bluetooth module, magnetometer sensor, and Blynk application, the smart follow cart was programmed to accurately know the owner's location while following the cart. The values of latitude and longitude of the magnetometer sensor are set so that the correct leverage value can be obtained in the lead for fine adjustment of the start and stop angles so that the user's position can be freely detected. The above motor driver L298n was connected to the motor to drive the DC motor at a fine angle. A smart follow cart was implemented that receives location signals according to the direction of the owner by turning on/off the mobile phone app as a switching role by connecting the GPS through Bluetooth wireless communication using a smartphone.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.145-150
• /
• 2023

Non-uniform optical taper waveguides have been widely used as devices for high-efficiency mode coupling, as they are integrated with single-mode optical fibers or photonic crystal waveguides. In this paper, we present a new platform for chemical sensing and bio-sensing using optical taper waveguides with these characteristics. The principle of operation is based on the coupling efficiency and interference properties of optical directional coupler (DC) and multi-mode interference coupler (MMIC). First, the curvature characteristics of taper sections of DC and MMIC is explained, and the design specifications of optimized taper waveguide to increase waveguide sensitivity is selected. Next, the sensor response to the change in refractive index of sensing analyte is numerically analyzed. Numerical results show that as the length of couplers increases, the effective index per change in refractive index unit (RIU) of analyte increases, and that sensitivity can be tuned using taper DC and MMIC design techniques.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.384-392
• /
• 2022

The objective of this study was to estimated nitrogen content and chlorophyll using RGB, Hyperspectral sensors to diagnose of nitrogen nutrition in apple tree leaves. Spectral data were acquired through image processing after shooting with high resolution RGB and hyperspectral sensor for two-year-old 'Hongro/M.9' apple. Growth data measured chlorophyll and leaf nitrogen content (LNC) immediately after shooting. The growth model was developed by using regression analysis (simple, multi, partial least squared) with growth data (chlorophyll, LNC) and spectral data (SPAD meter, color vegetation index, wavelength). As a result, chlorophyll and LNC showed a statistically significant difference according to nitrogen fertilizer level regardless of date. Leaf color became pale as the nutrients in the leaf were transferred to the fruit as over time. RGB sensor showed a statistically significant difference at the red wavelength regardless of the date. Also hyperspectral sensor showed a spectral difference depend on nitrogen fertilizer level for non-visible wavelength than visible wavelength at June 10th and July 14th. The estimation model performance of chlorophyll, LNC showed Partial least squared regression using hyperspectral data better than Simple and multiple linear regression using RGB data (Chlorophyll R²: 81%, LNC: 81%). The reason is that hyperspectral sensor has a narrow Full Half at Width Maximum (FWHM) and broad wavelength range (400-1,000 nm), so it is thought that the spectral analysis of crop was possible due to stress cause by nitrogen deficiency. In future study, it is thought that it will contribute to development of high quality and stable fruit production technology by diagnosis model of physiology and pest for all growth stage of tree using hyperspectral imagery.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.257-264
• /
• 2007

In order to obtain a fine picture, a camera has many convenient functions. Its representative functions are Auto Focus(AF), Auto White Balance(AWB) and Auto Exposure(AE). In this paper, we present the new algorithm of Auto Exposure control system, one of its useful functions The proposed algorithm of Auto Exposure control system is based on IIR Filter with Variable Time Constant. First, in order to establish the standards of exposure control, we compare change of the picture luminance with luminance of an object in the Zone system. Second, we make an ideal characteristic graph of luminance by using the results. Finally, we can find the value of the right exposure by comparing an ideal characteristic graph of the luminance with the value of the current expose of a scene. We can find an appropriate exposure as comparing the ideal characteristic graph of the luminance with current exposure of a scene. In order to find a suitable exposure state, we make use of IIR Filter instead of a conventional method using micro-controller. In this paper, the proposed system has therefore simple structure, we use it for compact image sensor module used in the handheld device.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.93-97
• /
• 2018

In this paper, it proposes a method that uses an air pump to inject oxygen to water directly to prevent the growth of algae and cyanobacterium using MCU(Micro Controller Unit). MCU can control itself with modules of GPS, a sonic sensor, camera, conveyer belt and water pump to remove and prevent growths of algae. It can also be connected to the smart phone application software to track the system where it is and it can be controlled by the user interfaced with the smart phone application.

• Journal of Korea Multimedia Society
• /
• v.18 no.8
• /
• pp.960-967
• /
• 2015

In this paper, we propose a user interface technique based on embedded sensors applying to apps in smart phone. Especially, we implement avata generation application using image filtering technique for photo image in smart phone. In the application, The embedded sensors are used as intuitive user interface to adjust the image filtering effect for making user satisfied effect in real time after the system produced the image filtering effect for avatar. This technique provides not a simple typed method of parameter values adjustment but a new intuitively emotional adjustment method in image filtering applications. The proposed technique can use sound values from embedded mike sensor for adjusting key values of sketch filter effect if the smart phone user produces sound. Similiarly the proposed technique can use coordinate values from embedded acceleration sensor for adjusting masking values of oil painting filter effect and use brightness values from embedded light sensor for adjusting masking values of sharp filter effect. Finally, we implement image filtering application and evaluate efficiency and effectiveness for the proposed technique.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.71-71
• /
• 2015

반도체 및 디스플레이 소자 제조를 위한 진공 플라즈마는 다양한 공정 조건하에서 다양한 공정 가스의 물리화학적 반응에 의한 박막의 형석 및 식각 반응을 유도한다. 실 공정 하에서 기체 성분의 환경 조건에 의하여 박막층 및 식각 구조 형성에 심각한 영향이 발생할 수 있으며, 공정 조건에서 기체 압력을 완벽하게 컨트롤 하는 것은 현실상 불가능하므로 기체 부분압력이 실시간으로 반드시 모니터링 되고 이를 피드백으로 하여 압력 변수가 조정되어야 완벽하게 공정을 제어할 수 있다. 이를 위하여 현장에서 플라즈마 공정을 실시간 in-situ 모니터링 할 수 있는 다양한 진단 방법이 도입되고 있으며 접촉신 진단 방법은 플라즈마와 섭동으로 인한 교란을 유발하고, 이온에너지 측정의 한계가 존재하며 비접촉식 방법 중의 하나인 유도형광법(LIF)은 측정 물질의 제한으로 인하여 플라즈마 내에 존재하는 다양한 가스 종의 거동을 살필 수 없는 등 현실 적용 측면에서 실 공정에 적용하는데 단점이 존재한다. 공정 상태 및 RF에 의한 영향을 주고받지 않고, 민감한 공정 변화의 감지 및 혼합가스를 사용하는 실시간 공정 진단을 위하여 비접촉 광학 측정 방식인 발광 분광 분석법(optical emission spectroscopy, OES)이 각광받고 있으며, 본 강습에서는 분광학의 기본 개념 및 OES를 이용한 진공 플라즈마 진단 방법에 관한 전반적인 개요를 설명하도록 한다