• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2007

This study proposes to increase the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing daylight incident. A photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, received a proper dimming signal from DCU. Generally it is effective to control artificial lighting with the different control ratio of each zone by setting a photosensor as same number and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. As a result of grasping the distribution of daylight previously and analyzing daylight and dimming data, we can dim different dimming ratios to each zone of artificial lighting by a single photosensor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.31-36
• /
• 2014

A study on the indoor positioning system has been active recently for the location based service indoors. In the 3 dimensional positioning system based on the acoustic signal and TDOA technology, the error characteristics of the estimated source position would be changed depending on the number of microphones and the pattern of the microphone array. In this paper, the estimated position error according to the measured distance error between the microphones and the signal source is analyzed, and the optimum microphone array is decided considering the estimated position error patterns and the total amount of the estimated position error.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1328-1329
• /
• 2008

2000년 대 이후 송전선의 상태 및 송전선 주변 환경을 감시하기 위한 각종 센서들을 하나의 시스템으로 통합하여 실 선로에 적용하는 연구가 활발히 진행되고 있으며, 국내에서도 최근 765kV급 송전선을 감시하기 위한 통합 센서 시스템 개발을 진행 중에 있다. 이를 위해서는 송전선로에서 발생되는 자계로부터 센서 통합 시스템을 보호하기 위한 자계 차폐에 대한 연구가 선행되어야 한다. 따라서 본 논문에서는 상용 주파수에서 약 80,000[H/m]이상의 투자율(${\mu}_r$ : relative permeability)를 갖는 강자성체인 ${\mu}$-metal을 사용하여 765kV급 송전선 (2,000A/single phase)에 대한 차폐율을 연구하였고, 이를 위해 ${\mu}$-metal의 차폐율을 검증할 수 있는 magnetic probe를 자체 설계 제작하였다. 그 결과 magnetic probe에 의해 측정된 자계의 크기 및 분포를 통해 ${\mu}$-metal의 layer의 개수에 따라 변화하는 자계 차폐율을 분석할 수 있었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.297-299
• /
• 2010

모든 물건에 컴퓨팅 기능과 통신 기능을 부가하여 사물과 사람의 위치와 공간 정보, 그리고 속성정보를 파악하게 함으로써, 인간의 생활에 협조적인 기능을 제공하는 센서 네트워크가 모든 정보기기와 함께 네트워크 상에 있는 서버에 항시 접속되어, 기기의 제어는 물론 원하는 서비스를 언제든지 받을 수 있는 환경을 제공하는 유비쿼터스 네트워크가 연구되고 잇다. 유비쿼터스 네트워크는 일상생활에 곳곳에 편재된 센서 및 컴퓨터들이 수집한 각종 환경 정보를 효과적으로 상호 공유하여 사용자 및 주변환경의 상황을 알아내고 그에 맞는 다양한 정보에 근거하여 자발적으로 서비스를 제공하고 있다. 특히, 유비쿼터스 네트워크는 IP 기반 유선 네트워크, 이동통신 네트워크, Ad-hoc 네트워크 등과 같은 기존 네트워크와 향후에 등장할 4세대 이동통신, 유무선 통합망 등이 하나로 연결되고 연동된다는 점에서 개념적인 네트워크이다. 그러나 유비쿼터스 네트워크를 사용함에 있어, 이론상의 연동 가능한 모듈 개수가 실 구현에 적용 할 때에 이론상에 미치지 못하는 문제점이 존재하고 있다. 그에 따른 적절한 해결책이 필요하기에, 본 논문에서는 유비쿼터스 네트워크의 객체 인식 기술과 센서 네트워크 기반 상황 인식 서비스 기술과, 유비쿼터스 서비스의 적용 분야를 정리하고, 데이터 통신을 위한 구조도를 제시한다.

• Journal of the Korean Magnetics Society
• /
• v.20 no.2
• /
• pp.45-51
• /
• 2010

We suggest the algorithm that it detects volume and shape according with a variation of magnetic field in non-contact electromagnetic measurement system. It is possible to assess an object shape through a variation of magnetic field. The basic idea is compared a length difference with a variation of magnetic field in a detected object and a circle which modeled equivalent area. And the shape is detected to many calibration process that it is similar to signal pattern between a length difference and a variation of magnetic field in object and equivalent circle. This is the shape detection algorithm that use only the variation of magnetic field. In this paper, it has application to the shape detection algorithm about the object as hexagon, pentagon, rectangle, trigon. we can detect the object shape easily because the shape detection algorithm is only used to the variation of magnetic field.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.269-277
• /
• 2007

Wireless sensor network system is expected to get high attention in research for now and future owing to the advanced hardware development technology and its various applicabilities. Among variety of sensor network systems, the seashore and marine sensor network, which are extended to get sampling of marine resources, environmental monitoring to prevent disaster and to be applied to the area of sea route guidance. For these marine applications to be available, however, the provision of precise location information of every sensor nodes is essential. In this paper, the sequential localization algorithm for obtaining the location information of marine sensor nodes. The sequential localization is done with the utilization of a small number of beacon nodes along the seashore and gets the location of nodes by controling the sequences of localization and also minimizes the error accumulation. The key idea of this algorithm for localization is that the localization priority of each sensor nodes is determined by the number of reference nodes' information. This sequential algorithm shows the improved error performance and also provide the increased coverage of marine sensor network by enabling the maximum localization of sensor nodes as possible.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.161-172
• /
• 2023

Autonomous driving vehicles recognize the surroundings through various sensors mounted on the vehicle and control the vehicle based on the collected information. The level of autonomous driving technology is improving due to the development of sensor technology and algorithms that process collected data, but the implementation of perfect autonomous driving technology has not been achieved. To overcome these limitations, through autonomous cooperative driving centered on infrastructure. In this study, developed a position correction sign that provides a reference for positioning of autonomous vehicles. First of all, an analysis was performed on the current status of positioning technology for autonomous driving. And measure the number of point clouds for the 1st sample consisting of two square reflective surfaces and 2nd sample that increased the vertical length of each reflective surface. Experimental results show that both primary and secondary products are installed at least 15 m apart It could be recognized as a sensor, and it was confirmed that the secondary production that increased the length of the top and bottom had a higher number of point clouds than the primary production and better expressed the shape of the facility.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.551-558
• /
• 2021

In this paper, we made the integrated intelligent air ventilation of the actuator module that can be remotely controlled based on IoT and sensors. we implemented a ventilation window system by configuring an algorithm design and a driving circuit to control the operation of the actuator to open and close the ventilation port based on a predetermined number of data that detects indoor gas/CO2/humidity temperature and outdoor fine dust related indoor/outdoor environment. It is difficult to store, manage, and analyze data due to the large number of sensors and conditions for the transmission data of indoor air circulation module. The remote monitoring and remote wireless control screens were constructed to automate the separation and operation conditions by extracting and managing the state. We apply MQTT to enhance big data transmission and construct the system using Rocket MQ to ensure safe transmission of operational big data against system errors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.101-103
• /
• 2022

CCTV is mainly used as a real-time detection system for critical facilities. In the case of CCTV, although the accuracy is high, the viewing angle is narrow, so it is used in combination with a sensor such as a radar. LiDAR is a technology that acquires distance information by detecting the time it takes to reflect off an object using a high-power pulsed laser. In the case of lidar, there is a problem in that the utilization is not high in terms of cost and technology due to the limitation of the number of simultaneous processing sensors in the server due to the data throughput. The detection method by the optical mesh sensor is also vulnerable to strong winds and extreme cold, and there is a problem of maintenance due to damage to animals. In this paper, by using the 1550nm wavelength band instead of the 905nm wavelength band used in the existing lidar sensor, the effect on the weather environment is strong and we propose to develop a system that can integrate and control multiple sensors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1921-1925
• /
• 2010

개수로의 흐름을 측정하는 유속계는 유체역학 및 수리학적 연구와 유량 측정 등의 업무에 필수적인 장비이다. 그동안 국내에서는 일부 전자파표면유속계(이상호 등, 1997)와 영상처리 기반의 LSPIV(김영근 등, 2004)와 같은 비접촉식 유속측정 장치가 개발되어 활용되고 있지만, 유속 및 유량 측정에 보다 널리 사용되고 있는 수중 투입식 유속계의 경우 거의 개발되지 않았다. 특히 유속 분포를 측정하는데 활용될 수 있는 초음파 방식 유속 프로파일러는 거의 전적으로 외국제품에 의존하고 있다. 일반 유속계가 점유속을 측정하는데 비해 유속 프로파일러는 센서가 지향하는 방향선을 따라 공간적인 유속분포를 동시에 획득할 수 있으므로 측정 효율성이 높다는 장점을 지닌다. 본 연구에서는 국내 기술로 개수로 흐름 측정에 활용할 수 있는 초음파 유속 프로파일러를 개발하였다. 이 유속 프로파일러는 초음파 펄스를 반복적으로 송수신하는 PRF 기법을 이용하여 개발하였다. 개발된 유속 프로파일러는 직사각형 수로에서 유속 분포를 측정하기 위해 적용하였으며, 기존의 2차원 유속계와 그 결과를 비교하였다. 본 연구에서 개발한 유속 프로파일러는 실제 하천에 활용하기에는 측정 가능한 유속 및 수심 범위의 한계가 있으나 PRF 기법의 한계 범위에서는 실측 유속분포를 비교적 잘 재현하는 것으로 나타났다.