• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1393-1398
• /
• 2009

Conventionally, etching is first considered for microelectronics fabrication process and is specially important in process of a-Si:H thin film transistor for LCD. In this paper, we stabilize properties of device by development of wet and dry etching process. The a-Si:H TFTs of this paper is inverted staggered type. The gate electrode is lower part. The gate electrode is formed by patterning with length of 8 ${\mu}$m${\sim}$16 ${\mu}$m and width of 80${\sim}$200 ${\mu}$m after depositing with gate electrode (Cr) 1500 ${\AA}$under coming 7059 glass substrate. We have fabricated a-SiN:H, conductor, etch-stopper and photo resistor on gate electrode in sequence, respectively. The thickness of these thin films is formed with a-SiN:H (2000 ${\mu}$m), a-Si:H(2000 ${\mu}$m) and n+a-Si:H (500 ${\mu}$m), We have deposited n-a-Si:H, NPR(Negative Photo Resister) layer after forming pattern of Cr gate electrode by etch-stopper pattern. The NPR layer by inverting pattern of upper gate electrode is patterned and the n+a-Si:H layer is etched by the NPR pattern. The NPR layer is removed. After Cr layer is deposited and patterned, the source-drain electrode is formed. In the fabricated TFT, the most frequent problems are over and under etching in etching process. We were able to improve properties of device by strict criterion on wet, dry etching and cleaning process.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.64-72
• /
• 2013

The purpose of this study is to confirm the possibility of obtaining high grade coal from 57.39% of fixed carbon fine coal. Also, the mineralogical, physical/chemical and liberation characteristics are to be identified to decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and CPT column flotation proper for the processing of fine particles were used with the variation in kinds and quantity of frother, collector and depressant. Also air flow rate and feeding rates were examined. As a result of batch flotation using 20% of pulp density DMU 101 collector(100 mL/ton), AF65 frother(300 mL/ton), sodium metaphosphate depressant (1 kg/ton), 67.57% of ash rejection and 70.90% of combustible recovery were obtained. The result of CPT column flotation was 85.59% of ash rejection and 88.97% of combustible recovery under the conditions of 5% of pulp density, DMU-101 collector (100 mL/ton), AF65 frother(10 L/ton), SMP depressant(1 kg/ton), wash water(100 mL/min.) and air flow rate(1,200 mL/min.).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.221-226
• /
• 2006

This study is about backwash condition and membrane fouling at continuous filtration process in ballast water treatment. Displayed result that handle particle contaminant and hydrospace organism included a number of ballast that is happened in ship using automatic back washing filter. Reason that removes first contaminant that is included in number of ballast is that heighten processing effect of after processing process of the filter. Another advantage is to drop off the solids with controlling revolution of drum screen in pretreatment filtration process. The capacity of pilot plant was $10m^3/h$. The result of the test, Backwash cycle time and duration time and a signification effect on the efficiency of system and backwash Backwash duration time was determined to be fixed in 6 seconds of the system with more than 95% removal rate, It needed 1hour backwash frequency. Filtration system removal aquatic organism over $70{\mu}m$ in ballast water. This study shows that the filtration treatment system has a potential for the treatment of ballast water.

• Journal of Chest Surgery
• /
• v.30 no.6
• /
• pp.553-558
• /
• 1997

Arterial allografts have known advantages over prosthetic vascular conduit for treatment of heart valvular disease, congenital heart disease and aortic disease. Cell viability may play a role in determining the longterm outcome of allografts. Endothelial cell is one important part in determining the allograft viability. To evaluate the viability of endothelial cells using current allograft preservation technique, porcine heart valve leaflets and arterial wall were subjected to collagenase digestion. Single endothelial cell suspension was labeled with GSA-PITC(Griffonia simplicifolia agglutininfluorescein isothiocyan te), a vascular, endothelial cell specific marker. The cell suspension was washed and incubated with Pl(Propidium iodide), which does not bind with viable cells, Endothelial cell viability was evaluated by calculating the percentage of GSA-FITC(+) and Pl(-) group using flowcytometric analysis. Allografts were treated with $4^{\circ}C$ antibiotic solo!ion for 24 hours for sterilization. After this, half of allografts were stored in $4^{\circ}C$ RPMI 1640 with HEPES buffer culture medium with 10% fetal bovine serum for 1 to 14 days(Group I). Another half of allografts were cryopreserved with a currently used technique (Group II). During the procurement and sterilization of arterial allografts, 22.8% and 24.4% of endothelial cell viability declined, respectively. In Group I, 11.9% of endothelial cell viability declined further steadily during 14 days of storage. In Group II, 13.7% of endothelial cell viability declined. These results show that largest loss of endothelial cell viability occurs during the nitial process. After 14 days of arterial allograft storage under $4^{\circ}C$ nutrient medium or cryopreservation, about 40% of endothelial cell viability is maintained. There were no differences between the endothelial cell viability from aortic valve leaflet, pulmonic valve leaflets, aortic wall and pulmonic wall.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.917-927
• /
• 2018

Seven heavy metal concentrations (As, Cd, Cr, Cu, Ni, Pb, Zn) were continuously analyzed for twenty rainfall events in 2017~2018 in an urban basin. The overall and dynamic correlations between runoff characteristics and heavy metal concentrations were examined. The peak metal concentration generally appeared in the initial runoff but found to be delayed when the rainfall intensity was low. The rainfall duration had no relationship with either heavy metal concentrations or their total mass. Dynamics of heavy metal mass (load), with the exception of Cu and Zn, showed strong correlation with the 30 minute rainfall intensity (0.60~0.88) and runoff volume (0.74~0.89). While event mean concentration (EMC) showed positive correlation (0.54~0.73) with antecedent dry days (ADD), no significant relationship was found between runoff volume and pollutant concentration. This implies that the pollutants built up on the surface during dry days are washed off even with low rainfall energy. The dynamics of heavy metal and TSS concentrations showed good correlation (0.68~0.87). This result shows that the metals are transported along with solid particles as adsorbate in surface runoff. Regular street sweeping will reduce significant amount of heavy metal loads in urban surface runoff.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.161-161
• /
• 2010

InAsSb alloy system 은 HgCdTe 를 대체하는 적외선 광소자 및 검출기 등에 응용이 가능한 유망한 물질이지만 정확한 유전함수 및 전이점의 연구는 미흡한 실정이다. 본 연구에서는 타원 편광 분석법을 이용하여 1.5 ~ 6 eV 의 분광 영역에서 As 조성비를 각기 (x = 0, 0.127, 0.337, 0.491, 0.726 및 1.00) 다르게 한 $InAs_xSb_{1-x}$ alloy의 유전함수를 측정하였다. 또한 표면에 자연산화막을 제거하기 위하여 Methanol 과 DI Water 로 표면을 세척 한 후 $NH_4OH$, Br in Methanol, HCl 등으로 적절한 화학적 에칭을 하여 산화막을 제거함으로서 순수한 InAsSb 의 유전함수를 측정할 수 있었다. 측정된 InAsSb 유전함수를 Standard analytic critical point line shape 방법으로 As 조성비에 따른 에너지 전이점을 얻을 수 있었다. 또한 얻어진 에너지 전이점 값을 이용하여 linear augmented Slater-type orbital 방법으로 전자 밴드 구조 계산을 하였고, 이를 바탕으로 $E_0$, $E_1$, $E_2$ 전이점 지역의 여러 전이점 ($E_1$, $E_1+\Delta_1$, $E_0'$, $E_0'+\Delta_0'$, $E_2$, $E_2+\Delta_2$, $E_2'$, $E_2'+\Delta_2$, $E_1'$) 의 특성을 정확히 정의할 수 있었다. 또한 As 조성비가 증가하면서 $E_2$, $E_2+\Delta_2$, $E_2'$, $E_2'+\Delta_2$ 전이점들이 서로 교차 되는 것을 발견하였고, 저온에서만 관측이 가능하였던 InSb 의 두 saddle-point (${\Delta_5}^{cu}-{\Delta_5}^{vu}$, ${\Delta_5}^{cl}-{\Delta_5}^{vu}$)를 상온에서 찾아내었다. 타원 편광 분석법을 이용한 전이점 연구 및 물성 분석은 InAsSb alloy 의 광학적 데이터베이스를 확보하는 성과와 더불어 새로운 디바이스기술 및 광통신 산업에도 유용한 정보가 될 것이다.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.142-148
• /
• 2016

The characterization of stormwater runoff from mix land-use catchments with an inadequate sewer network is a challenge. This study focused on characterizing stormwater runoff from the Paldang watershed area based on land-use type and sewer system coverage. A total of 76 sites were monitored during wet weather from seven different counties within Paldang watershed. Public sewer system (PSS) was installed at 48 sites, while 28 sites had no or individual sewer system (ISS) coverage. The results indicated that the sites included in the ISS group with higher forest and paddy land-use percentage exhibit higher values of average event mean concentrations (EMCs) and first flush intensity for suspended solids (SS), total nitrogen (TN), and total phosphorous (TP). In addition, upgrading runoff interception system can capture 59 % of the TP load in the first 43% of runoff within these sites. Similarly, rainfall depth and storm duration showed a positive correlation (R > 0.6) with nutrient loads within ISS group sites, as compared to PSS group. Therefore, these sites are likely to contribute higher TP and TN loads during heavier storm events and should be selected as priority management areas to combat the problem of eutrophication in Paldang reservoir.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.255-264
• /
• 2011

Purpose: To study the effect of hyaluronic acid(HA), which was widely used in artificial tears, multi-purpose solution(MPS), cosmetics, and drug acting on the musculo-skeletal system, in wettability and comfort of contact lens, we compared HA including lens(+HA) with HA excluding lens(-HA) by clinical evaluation. Methods: During four weeks, the selected 28 university student volunteers who did not have any eye disease wore +HA contact lens on their right eyes, and -HA contact lens on their left eyes, and then compared right eyes to left eyes as control. After prescribing by spherical equivalent calculation, over-refraction by auto-refractometer, and contact lens wearing for two weeks and four weeks, tear evaluation, the anterior of eyes examination, fitting convenience evaluation, surface wetting test, surveys were checked up. Results: Compared with the control group (-HA contact lens), +HA contact lens provided better wetting properties. The amount of released tear in -HA contact lens group became less in four weeks than before, but that in +HA contact lens group showed no significant difference from the initial one. In terms of the redness in eye, there was no significant difference between +HA and -HA contact lens groups. Fitting of +HA contact lens on eye was much easier than the control, -HA contact lens. From the results of survey, comfort, wettability, ease of cleaning, and dryness of eye in +HA contact lens group were generally better than those of -HA group, but redness and contact lens handling showed little difference. Conclusions: The addition of HA in soft contact lens(+HA) may enhance the wettability of lens during lens wearing, resulted in the better comfortable wearing of lens eventually.

• Journal of Food Hygiene and Safety
• /
• v.17 no.2
• /
• pp.79-86
• /
• 2002

Aflatoxin is a secondary fungal metabolite and is a public health hazard because it is a human carcinogenic and has many deleterious effects in men and animals. Rice is one of the better substrates far the fungus which can produce aflatoxins. This study was performed to investigate aflatoxin reduction during the cooking and processing of rice. Aflatoxin was produced by Aspergillus parasiticus ATCC 15517 on well-milled rice (Japonica type) at the level of 13.2 ppb. Cooked rice, rice cakes (baek-sol-gi, plain steamed rice bread), fermented rice (sikhye, sweet rice beverage), and popped rice were prepared from the aflatoxin-contaminated rice. Aflatoxin content in the samples was determined by high performance liquid chromatography. The total aflatoxin level was decreased to 46.9% in the cooked rice, 85.6% in the rice cakes, 11.4% in the fermented rice, and 7.6% in the popped rice, respectively (p.0.05). This reduction brought the level of aflatoxins down to below the Standard and Specification of korea (10 ppb), except for the rice cakes. These results indicate that washing, steaming, fermentation, and popping of rice was helpful in reducing the aflatoxin level in the rice and the most helpful factors were high temperature & high pressure. More research is needed to understand why the preparation of rice cakes did not reduce the level of aflatoxin as much as the other cooking methods.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.238-243
• /
• 2006

The populations of V. parahaemolyticus were enumerated in oysters collected in wholesale seafood markets in Seoul and tested in various possible condition. The populations of oysters soled in the markets were ranged $<2\sim1.4\times10^6$ MPN/100 g from April to November in 2005. In the case of oysters added with V. parahaemolyticus of $4\times10^3$ CFU/100 g, the highest population numbers were $1.4\times10^7$ CFU/100 g, $5.4\times10^5$ CFU/100 g and $2.7\times10^4$ CFU/100 g at $36^{\circ}C$ after culturing for 15 hours, at $25^{\circ}C$ after 15 hours and at $4^{\circ}C$ after 15 hours, respectively. But the difference of the populations of V. parahaemolticus in oysters stored in the icebox with ice for bulked sale and displayed in stalls on ice for the small packaged sale was not significant. In the case of oysters carried with ambient temperature at $30.8^{\circ}C$, the V. parahaemolyticus density was dramatically increased from $2.7\times10^5$ to $1.4\times10^8$ MPN/100 g. It was indicated it is important to carry the oysters to home with ice after purchase. Even after the washing two times with 21 tap water, the common cooking method in Korea was not greately make the decrease of V. parahaemolyticus density from $1.4\times10^8$ MPN/100 g to $9.0\times10^5$ MPN/100 g. So it is noticed to stored in low temperature after cooking, especially in hot seasons.