• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.643-648
• /
• 2014

세일링 요트 (sailing yacht)는 세일 (sail)의 양력을 주로 이용하여 추진력을 얻는다. 요트 경주에서와 같이 항주 속도가 중요한 문제에서는 세일의 성능이 좋을수록 빠른 속도를 낼 수 있기 때문에 세일 주변의 유동해석을 통한 성능 추정과 효율의 최적화는 매우 중요하다. 본 논문에서는 일반적인 경주요트의 형태로써 지브 세일 (jib sail)과 메인 세일 (main sail) 그리고 한 개의 마스트(mast)로 구성된 슬루프(sloop)형 요트에 대한 유동해석을 하였다. 풍상범주 상태에서의 30ft급 세일링 요트인 KORDY-30의 jib sail과 main sail의 높이에 따른 단면을 모델링하였다. 슬루프형 요트의 경우, 세일링 요트에서 jib sail과 main sail이 각각 단독으로 있는 형태의 요트보다 세일의 개수가 증가함에 따라 양력이 증가하지만 항력도 따라서 증가 할 것이라고 가정했다. 따라서 jib sail의 각도를 다양하게 변화시켜 양력계수와, 항력계수의 변화를 살펴보고 그에 따른 양항비의 분석을 통해 최적의 효율을 갖는 jib sail의 각도를 알아보았다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.931-941
• /
• 2020

There is a growing interest this paper for ocean sensing where autonomous vehicles can play an essential role in assisting engineers, researchers, and scientists with environmental monitoring and collecting oceanographic data. This study was conducted to develop a rigid sail for the autonomous sailing drone. Our study aims to numerically analyze the aerodynamic characteristics of curvy twin sail and compare it with wing sail. Because racing regulations limit the sail shape, only the two-dimensional geometry (2D) was open for an optimization. Therefore, the first objective was to identify the aerodynamic performance of such curvy twin sails. The secondary objective was to estimate the effect of the sail's spacing and shapes. A viscous Navier-Stokes flow solver was used for the numerical aerodynamic analysis. The 2D aerodynamic investigation is a preliminary evaluation. The results indicated that the curvy twin sail designs have improved lift, drag, and driving force coefficient compared to the wing sails. The spacing between the port and starboard sails of curvy twin sail was an important parameter. The spacing is 0.035 L, 0.07 L, and 0.14 L shows the lift coefficient reduction because of dramatically stall effect, while flow separation is improved with spacing is 0.21 L, 0.28 L, and 0.35 L. Significantly, the spacing 0.28 L shows the maximum high pressure at the lower area and the small low pressure area at leading edges. Therefore, the highest lift was generated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.55-60
• /
• 2006

최근 우리나라는 일반인들의 레저에 대한 관심이 고조되고 있고, 선진국형 해양레저에 대한 관심과 수요가 크게 증가하고 있는 실정이다. 특히, 해양레저의 꽃이라 할 수 있는 세일링요트 및 관련 장비 경우에는 대부분 전량 수입에 의존하고 있어 국산화 개발이 시급히 요구되고 있는 실정이다. 따라서 세일링요트 중에서 넓은 갑판면적 및 안정된 운항성능을 가지는 카타마란형 세일링요트의 선형설계와 형상에 따른 성능/특성 검증 위한 선형시험 등을 수행하여 국내에 적합한 카타마란형 세일링요트의 기초 자료를 정립하여 중소형조선소의 레저선박 관련 기술경쟁력 확보와 해양레저 활성화에 도움을 주고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.139
• /
• pp.24-33
• /
• 2005

It is important to understand the flow characteristics around two sails of a sloop yacht. In this paper a computational aerodynamic investigation is performed over sail-like airfoils similar to the main and iIb sails of a 30 feet sailing yacht. Lift and drag are calculated for various conditions of slit distance between the two sails and overlapped length of the jib sail. The thrust and CE(center of effort) of the sail system are obtained. It is found that the combination of two sails produces the thrust force larger than the sum of the thrust force of each sail standing separately and the slit distance of the two sails are important factor to increase lift force.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.197-206
• /
• 2023

Recently, the international community, including the International Maritime Organization (IMO), has strengthened regulations on air pollution emissions of ships, and eco-friendly ships are actively being developed to reduce exhaust gas emissions. Among them, rotor sail (RS), a wind-assisted ship propulsion system, is attracting attention again. RS is a cylindrical device installed on the ship deck, that generates hydrodynamic lift using a magnus effect. This is a next generation eco-friendly auxiliary propulsion technology, and Enercon company, which developed RS-applied ships, announced that fuel savings of more than 30% are possible. In this study, optimal installation conditions such as RS spacing and arrangement type were selected when multiple RSs were installed on ships. AR=5.1, SR=1.0, and D_e/D was fixed at 2.0 according to the RS arrangement, and the wind direction was considered only for the unidirectional +y-axis. Regarding arrangement conditions, five conditions were set at 3D intervals in the +x-axis direction from 3D to 15D and five conditions in the +y-axis direction from 5D to 25D. C_L, C_D and aerodynamic efficiency (C_L/C_D) were compared according to the square(□) and diamond(◇) shape arrangements. Consequently, the effect of RS on the longitudinal distance was not significantly different. However, in the case of RS flow characteristics according to the transverse distance, the interaction effect of RS was the greatest when the two RSs almost matched the wind direction. In the case of the RS flow characteristics according to the arrangement, notably, when the wind blew in the forward (0°) direction, the diamond (◇) arrangement was least affected by the backward flow between RSs.

• Explosives and Blasting
• /
• v.16 no.2
• /
• pp.23-33
• /
• 1998

This study has been carried out to design the standards of rock bolts which are recommended to be used for supporting material in Seong Ju tunnel, Under recently planned to construct. Due to the weak bedding rocks along the Tunnel, NATM supporting method is assumed to be applied and the design and calculation for rock bolts which are important material for this supporting method. Though the study, the results obtained are as follows. 1) The rocks defined s coarse sandstone, fine sandstone, medium sandstone, sandy shale and silty shale are normal rocks in strength, and black shale, greywacke and conglomerate are weak rocks in strength. 2) When the length of 3∼4meters of rock bolts are used, the distances of bolts are supposed to be 1.3∼1.8m in sandstone and 1.3∼2.0m in shale and for greywacke the distance should be 1.5m.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.90-96
• /
• 1998

Non-contacting capacitive sensors, based on principle of the cross capacitor, for measuring small displacement less than $1.95{\pm}0.5\;mm$ have been fabricated and characterized. To overcome disadvantages of the existed capacitive sensors with 2-electrodes and 3-electrodes, the new sensor is consisted of 4-electrodes which are formed two electrode(high, low) and 2 guard electrodes on a sapphire plate with diameter 17 mm and thickness 0.7 mm, and are symmetrically situated with a constant gap of 0.2 mm between the electrodes. This sensor can be used for measuring both metallic and non-metallic target without ground connection, and is evaluated to the correlation coefficient of 0.9987 for the range of $1.95{\pm}0.5\;mm$ and that of 0.9995 for $1.95{\pm}0.25\;mm$ range.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.65-72
• /
• 2007

This paper aims to provide information to generate a statistical load model of an educational server by analyzing workload of an e-Learning sewer at Dankook University. The result of the analysis shows file size distribution, access frequency and transmission volume for each file type, access interval, changes in preference and clients access rate by networks. In particular, it had different results from previous studies about video file's size distribution and file distribution based on access frequency. This is because the characteristics of e-learning are influenced by using authoring tools for making into video file and by freeing the number of students who register for a course. The result in this paper can be used as a basic data for studies designed to improve e-learning system architecture and server performance.

• Journal of Sensor Science and Technology
• /
• v.12 no.3
• /
• pp.103-111
• /
• 2003

A chromel-alumel thermoelectric flow sensor using $Si_3N_4/SiO_2/Si_3N_4$ thermal isolation membrane was fabricated. Temperature coefficient of resistance of thin film Pt-heater was about $0.00397/^{\circ}C$, and Seebeck coefficient of chromel-alumel thermocouple was about $36\;{\mu}V/K$. The sensor showed that thermoelectric voltage decreased as thermal conductivity of gas increased, and $N_2$-flow sensitivity increased as heater voltage increased or the distance between heater and thermocouple decreased. When heater voltage was about 2.5 V, $N_2$-flow sensitivity and thermal response time of the sensor were about $1.5\;mV/sccm^{1/2}$ and 0.18 sec., respectively. Linear range in flow sensitivity of the flow sensor was wider than that of Bi-Sb flow sensor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1721-1725
• /
• 2010

This paper reports the fabrication of geometry-controlled carbon microneedles by a backside exposure method and pyrolysis. The SU-8 microneedles are a polymer precursor in a carbonization process, which geometries such as base diameter, spacing, and aspect ratio can be controlled in a photolithography step. Using this fabrication method, highly reproducible carbon microneedles, which have high aspect ratios of more than 10 and very sharp nanotips, can be realized. The quartz surface with carbon microneedles becomes very hydrophilic and its wettability is adjusted by carrying out the silane treatment. In the carbon microneedle array ($3\;{\mu}m{\times}3\;{\mu}m$), the contact angle is extremly enhanced (${\sim}180^{\circ}$); this will be advantageous in developing low-drag microfluidics and labs-on-a-chip as well as in other bio-applications.