• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.180-180
• /
• 1999

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.27-27
• /
• 1997

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.346-346
• /
• 2008

최근 디지털 컨버젼스에 의해서 정보 단말기 network가 디지털 기술을 기반으로 유기적으로 융 복합화 되고 있으며 BT, NT, ET, IT의 융합 기술의 필요성이 점차적으로 증대되고 있다. 이러한 환경 하에서 다양한 정보 및 서비스의 송신 및 수신이 가능한 휴대 단말기의 필요성에 부응하여 기존의 전화 기능, 카메라, DMB 이외에도 홈 네트워크, mobile internet 등 더욱 다양한 기능들이 요구되고 있다. 종래에는 수동 부품과 능동 부품의 실장을 별개로 추진했으나 최근에는 수동 및 능동 부품을 하나의 패키지 내에 실장 가능하도록 하는 3-D Integration을 추진하고 있다. 지금까지 여러 부품들을 실장 시키기 위한 공정들의 대부분은 높은 온도에서 공정이 이루어졌으나 여러 부품들을 손상 없이 집적화하고 실장하기 위해서는 저온화 공정이 필요하다. 최근 많은 저온 공정 중에서 Aerosol Deposition Method는 상온에서 세라믹 후막을 성막할 수 있어 가장 주목받고 있는 공정중의 하나이다. 본 연구에서는 3-D Integration을 실현하기 위해 이종 접합에 유리하고 상온에서 성막 공정이 이루어지는 Aerosol Deposition Method를 이용하여 금속 기판 위에 금속, 폴리머, 세라믹 후막을 성막시켰다. 기판 재료로는 Cu 기판을 사용하였으며 출발 파우더로는 Polyimide 파우더와 $Al_2O_3$ 파우더, Ag 파우더를 사용하였으며 이종 접합간의 메커니즘의 양상을 보기 위해 같은 조건에서 이종 접합간의 성막률을 비교하였으며 FE-SEM으로 미세 구조를 관찰하였다. 또한 기판의 표면 거칠기에 따른 메커니즘의 양상을 연구하였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.690-695
• /
• 2003

Soft-solution route employing PVA(Polyvinyl Alcohol) as a polymeric carrier in a mixed metal cation solution was used for synthesis of single-phase nickel aluminate (NiA1$_2$O$_4$) powders. The PVA ensured the homogeneous distribution of metal ions in the solution and it resulted in the decrease of crystallization temperature. The synthesized powders prepared by PVA addition were soft and ball-milled easily. The ball-milled powders of about 300 nm in size were fully densified to density of 4.35 g/㎤ at 1600$^{\circ}C$ for 1 h. The Vickers hardness, flexural strength, fracture toughness and thermal expansion coefficient of the sintered nickel aluminate were 14.2 ㎬, 304 ㎫, 4.8 ㎫$.$m$\^$1/2/ and 9.8${\times}$10$\^$-6//$^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.35 no.6
• /
• pp.603-609
• /
• 1998

The composites of insulating polymer filled with conducting carbon-fiber were fabricated by molding press method. To understand the fiber aspect-ratio dependence of electrical conductivity the aspect ratio was varied from 4 to 10 The percolation thresholds of transition from the insulator to the conductor de-creased as the fiber aspect ratio increased. The percolation threshold of fiber-segregated composite in this study was smaller than that of fiber-random composite shown in other study. When the electrical con-ductivity curves were fitted by general effective medium equation morphological variable(t) decreased as the fiber aspect-ratio increased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.181-182
• /
• 2013

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2004.11a
• /
• pp.15-15
• /
• 2004

• Electrical & Electronic Materials
• /
• v.23 no.9
• /
• pp.12-19
• /
• 2010

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.1
• /
• pp.1-15
• /
• 2021

Additive manufacturing (AM) for dental materials can produce more complex forms than conventional manufacturing methods. Compared to milling processing, AM consumes less equipment and materials, making sustainability an advantage. AM can be categorized into 7 types. Polymers made by vat polymerization are the most suitable material for AM due to superior mechanical properties and internal fit compared to conventional self-polymerizing methods. However, polymers are mainly used as provisional restoration due to their relatively low mechanical strength. Metal AM uses powder bed fusion methods and has higher fracture toughness and density than castings, but has higher residual stress, which requires research on post-processing methods to remove them. AM for ceramic use vat polymerization of materials mixed with ceramic powder and resin polymer. The ceramic materials for AM needs complex post-processing such as debinding of polymer and sintering. The low mechanical strength and volumetric accuracy of the products made by AM must be improved to be commercialized. AM requires more research to find the most suitable fabrication process conditions, as the mechanical properties and surface of any material will vary depending on the processing condition.