• 한국재난정보학회:학술대회논문집
• /
• 한국재난정보학회 2015년 정기학술대회
• /
• pp.132-133
• /
• 2015

이 논문은 세라믹 비드를 일반 모르타르의 잔골재로 대체하여 사용했을 경우 모르타르의 압축강도에 변화를 확인하고자 수행하였다. 잔골재를 대체할 세라믹 비드의 입도분포를 확인하였고, 세라믹 비드의 잔골재 대체율을 10%, 20%, 30%로 설정하고 2가지 종류의 세라믹 비드를 이용하여 시험체를 제작하여 7일, 14일 28일의 압축강도를 측정하였다.

• 대한환경공학회지
• /
• 제27권5호
• /
• pp.549-554
• /
• 2005

골격 구조를 가진 다공성 세라믹 비드에 질산은 용액을 이용하여 Ag를 담지 하였으며, Ag 담지된 비드의 대장균, 포도상구균에 대한 항균 특성을 평가하였다. 또한, 상용화된 Ag-활성탄과 항균 특성에 대해 비교실험도 진행하였다. 질산은 용액의 농도가 높을수록, 비드의 내 외부 표면의 Ag 함량이 증가하였으며, 담지된 Ag 입자의 크기는 $0.5{\sim}2.0\;{\mu}m$ 범위로 나타났다. Ag 담지된 비드의 항균 특성은 다음과 같이 관찰되었다 : i) 질산은 용액 농도 및 반응시간이 증가할수록 높은 활성을 나타내었다. ii) 포도상구균에 비해 대장균의 경우 더 좋은 제거율을 나타내었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.86.2-86
• /
• 2003

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.289-289
• /
• 2005

• 자원리싸이클링
• /
• 제22권4호
• /
• pp.38-45
• /
• 2013

광미를 이용하여 다공성 세라믹 비드를 제조한 후 NOx/SOx 제거용 촉매 변환기로 응용하였다. 변환기 표면에 코팅처리된 촉매 지지체는 합성한 메조포러스 실리카(SBA-15)를 사용하였다. 다공성 세라믹 변환기의 내부 구조는 기공과 기공이 서로 연결되어 있는 3차원 망상구조이며 기공율은 80%로 나타났다. 또한, 촉매 변환기의 비표면적은 SBA-15 코팅 전 0.8 $m^2/g$에서 코팅처리 후에는 55 $m^2/g$으로 크게 증가하였다. NOx/SOx 제거 실험은 다공성 세라믹 촉매 변환기 표면에 $V_2O_5$와 $V_2O_5$, CuO를 함께 담지한 것으로 실시하였다. NOx 전환율은 $V_2O_5$/CuO 변환기가 $V_2O_5$ 변환기에 비해 약 10% 정도 높게 나타났다. 또한, $V_2O_5$/CuO 변환기는 반응온도 $350^{\circ}C$, 공간속도 10000 $h^{-1}$, 산소농도 5%에서 NOx 95%, SOx 90% 이상의 전환율을 각각 나타냈다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2016년도 정기학술대회 발표논문집
• /
• pp.181-181
• /
• 2016

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.60-67
• /
• 2008

The catalytic filter of Cu-ZSM5/alumina beads was considered to reduce NOx in the urea SCR system. Catalytic support of porous alumina beads with mean pore size $130{\mu}m$ and porosity $75{\sim}83%$ were prepared using foaming and gel-casting method. The Cu-ZSM5 catalysts were coated on the supporting alumina beads using $Cu(NO_3)_2$ by ion exchange method. After a washcoating process was applied to coat 10w% Cu-ZSM5 on porous alumina bead, coating layer was estimated $20{\mu}m$ in thickness. The characterization and the feasibility as a catalytic supports were investigated. And the NOx conversion test in Cu-ZSM5/Alumina Beads filter system was conducted by using Urea as reductants under laboratory test. The NOx conversion was increased as size and porosity of beads and observed more than 95% excellent NOx conversion above $300^{\circ}C$.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.233-240
• /
• 2019

This study analyzes the mechanical properties, including the attrition rate, of $50{\mu}m$ size yttria-stabilized zirconia (YSZ) beads with different microstructures and high-energy milling conditions. The yttria distribution in the grain and grain-boundary of the fully sintered beads relates closely to Vickers hardness and the attrition rate of the YSZ beads. Grain size, fractured surfaces, and yttrium distribution are analyzed by electronic microscopes. For standardization and a reliable comparison of the attrition rate of zirconia beads with different conditions, Zr content in milled ceramic powder is analyzed and calculated by X-ray Fluorescence Spectrometer(XRF) instead of directly measuring the weight change of milled YSZ beads. The beads with small grain sizes sintered at lower temperature exhibit a higher Vickers hardness and lower attrition rate. The attrition rate of $50{\mu}m$ YSZ beads is measured and compared with the various materials properties of ceramic powders used for high-energy milling. The attrition rate of beads appears to be closely related to the Vickers hardness of ceramic materials used for milling, and demonstrates more than a 10 times higher attrition rate with Alumina(Hv ~1650) powder than $BaTiO_3$ powder (Hv ~315).

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.189-194
• /
• 2010

Compared with organic fluorophores, semiconductor quantum dots (QDs) have the better properties such as photostability, narrow emission spectra coupled to tunable photoluminescent emissions and exceptional resistance to both photo bleaching and chemical degradation. In this work, CdSe/ZnS QDs nanobeads were prepared by the incorporation of CdSe/ZnS QDs with mesoporous silica to use as the optical probe for detecting toxic and bio- materials with high sensitivity, CdSe/ZnS core/shell QDs were synthesized from the precursors such as CdO and zinc stearate with the lower toxicity than pyrotic precursors. The QD-nanobeads were characterized by transmission electron microscopy, FL microscopy, UV-Vis and PL spectroscopy, respectively.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.518-522
• /
• 2012

Hyaluronic acid (HA) microbeads were synthesized by dropping 0.5 wt% of sodium hyaluronate dissolved in NaOH into 0.2 vol% of divinyl sulfone dissolved in 2-methyl-1propanol at a speed of 0.005 ml/min. HA microbeads were collected from a divinyl sulfone crosslinker solution stirred at 200 to 400 rpm for 5 h at temperatures from room temperature to $60^{\circ}C$ at intervals of $10^{\circ}C$. The crosslinked microbeads were then cleaned thoroughly using distilled water and ethanol. SEM results revealed that the microbeads were white-colored spheres. The 3-D porous network structure of the microbeads became dense with an increase in the crosslinking temperature; however, no dependence of the crosslinking temperature on the microbead size was detected. The extent of swelling decreased from 970% to 670% with an increase in the crosslinking temperature from room temperature to $60^{\circ}C$, most likely due to the increase in the degree of crosslinking.