• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.371-377
• /
• 2011

Users of the Information Age, IT usage patterns of the wired broadband information services and various forms of the same quality wireless multimedia services are required. Changes of these times the next-generation mobile communications (IMT-Advanced) has emerged as the necessity of developing its current voice and packet data communications on the move in the high-speed 100Mbps, 1Gbps in stationary and slow data transmission rates up to fixed-mobile convergence based on needed to provide ubiquitous service platform for the realization of IMT-Advanced is the time for preparation. In particular, 3-5GHz band, focused on mobile communications can be used to secure the necessary frequency band relocated and the existing crosstalk analysis methodology developed for the services rendered, and the frequency of such results to obtain new spectrum for IMT-Advanced for the country to secure the frequency characteristics and IMT-Advanced 3-5GHz band for the radio frequency of the characterization techniques necessary to develop a national wireless communication interference and frequency-based technology acquisition and management skills were identified.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.37-43
• /
• 2002

This paper describes the performance evaluation and analysis of Wireless Local Area Network (W-LAN) in the 5 GHz ISM-band in compliance with IEEE 802.11a. At present, most W-LAN products are based on 2.4 GHz band, but low speed (11Mbps) has the limitation to serve systems demanding high-speed data transmission. To solve this problem, it is necessary to design next generation W-LAN system with 54Mbps in the 5GHz. It is sure that implementation of next generation W-LAN will bring competitive advantages. In particular, it will support telecommunications for high-speed mobile environments as well as for fixed places such as a school zone, a lecture room, a hospital and other premises. A few simulation methods are applied to more accurate and reliable performance analysis of next generation W-LAN. To verify if continuous data service is supported for a high-speed mobile notebook, multi-path fading channels between wireless Access Point (AP) and wireless Network Interface Card (NIC) are modeled. In addition, low interference is analyzed via convolutional codes and Orthogonal Frequency-Division Multiplexing (OFDM). Also, to obtain reliable Bit Error Rate (BER), a single tap Least Mean Square (LMS) equalizer is applied. Given the above simulation, next generation W-LAN is an ideal solution for continuous data transmission in high-speed mobile environments.

• Convergence Security Journal
• /
• v.13 no.3
• /
• pp.25-31
• /
• 2013

Looking at the recent value change of users and the usage pattern of network users, it is changing from simple web information, one-way information acquisition and data transmission to increase of usage of multimedia, increasing demand for security and customization, and increasing demands for free mobility. Due to this change of demand, the services which were provided individually, developed into a form which is merged, the network also seems to develop into the combined network from the individual network for individual service, and the communication network control technology which is the core technology is also rapidly developing. To reflect the users' demands, the next generation network created the multi-layer network which is based on the WDM/IP transmission system and added the to make it easy to restructure. P-OTS (Packet-Optical Transport System) can be defined as a platform that combines SONET/SDH, Ethernet, DWDM, optical transport network (OTN) switching and reconfigurable optical add-drop multiplexers (ROADMs). In this paper, we suggested that the optimum path choice be performed through diversification of the PCE-based path selection using the information of various layers altogether in the multi-layer environment, compared with the established path selection method when the path was selected using the information of each layers.

• Journal of Digital Convergence
• /
• v.18 no.5
• /
• pp.383-389
• /
• 2020

The purpose of this study is to suggest consideration and direction of collaboration among different industrial field in Korea which has recently increased through the analysis of design collaboration case of cross-business in domestic. To do this, I did literature research followed with theoretical background of collaboration, and I analyzed case study of collaboration between different industries in domestic. In addition, I categorized as millennial targeting and brand premium positioning shifts. As a result, brand have to select a partner that is appropriate and would be an issue for purpose of collaboration and that the result should have a clear difference from existing product, including the design elements of the brand that they want to highlight. I expect this research will become a reference for collaboration between different industries.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2009

Next generation mobile communication system will have various access networks and provide seamless multimedia data service to mobile nodes. The WiNGS system, one of these access network, has superior RAT(Radio Access Technology) and network connectivity other than previous ones. In this paper, we propose link-layer SR-ARQ between mobile node and WAGW to solve packet re-ordering problem during handover. In the proposed scheme, we apply the adaptive timer at the SR-ARQ sender to reduce unnecessary packet retransmission during handoff and delayed NAK algorithm at the SR-ARQ receiver for delaying NAK response due to temporary out-of-sequenced frames. We evaluate the performance of the proposed scheme by implementing the new SR-ARQ protocol at the link-layer using ns-2 simulator, and show the handover performance is improved greatly by preventing unnecessary retransmission.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2992-2998
• /
• 2013

The future mobile communication system can support not only voice but also multimedia applications such as data, image and video. It requires greater resources than the voice-oriented mobile system. We propose user and sub-channel priority based resource allocation for mobile multimedia services in the OFDMA systems. Our method is able to guarantee QoS continuity of realtime services and carry the maximum number of non-realtime subscriber. Simulation is focused on total throughput and blocking rate. The simulation results show that our proposed method provides a better performance than the conventional method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.78.1-78.1
• /
• 2012

비 휘발성 저항 메모리소자인 resistance random access memory (ReRAM)는 빠른 동작특성과 저 전압 특성을 나타내고 비교적 간단한 소자구조로 고집적화에 유리하여 기존의 DRAM과 flash 메모리, SRAM 등이 갖고 있는 한계를 극복할 수 있는 차세대 메모리소자로써 각광받고 있다. 현재, 이성분계 산화물, 페로브스카이트 산화물, 고체 전해질 물질, 유기재료 등을 응용한 저항 메모리소자에 대한 연구가 활발히 진행되고 있다. 그 중 ZnO 를 기반으로 하는 amorphous InGaZnO (a-IGZO) 박막은 저온에서 대면적 증착이 가능하며 다른 비정질 재료에 비해 높은 전하 이동도를 갖기 때문에 박막트랜지스터 적용 시 우수한 전기적 특성을 나타낸다. 또한 빠른 동작특성과 높은 저항 변화율을 보이기 때문에 ReRAM에 응용 가능한 재료로써 기대되고 있다. 본 연구에서는 MOM(metal/oxide/metal) 구조를 기반한 TiN/a-IGZO/ITO 구조의 소자를 제작하여 저항 메모리 특성을 평가하였다. IGZO 박막은 radio frequency (RF) sputter 를 이용하여 ITO/glass 기판 위에 증착하였다. MOM 구조를 위한 상부 TiN 전극은 e-beam evaporation 을 이용하여 증착하였다. 제작된 저항 메모리소자는 안정적인 unipolar resistive switching 특성을 나타내었으며, TiN 상부전극과 IGZO 계면 간의 Transmission Electron Microscopy (TEM) 분석을 통해 전압 인가 후 전극 금속 물질의 박막 내 삽입으로 인한 금속 필라멘트의 형성을 관찰 할 수 있었다. 합성된 박막의 형태와 결정성은 Scanning electron microscope (SEM)와 X-ray Diffraction (XRD)을 통해 평가 하였으며, 제작된 소자의 전기적 특성은 HP-4145 를 이용하여 측정하고 비교 분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6B
• /
• pp.736-745
• /
• 2001

차세대 이동통신 시스템은 고속의 멀티미디어 데이터의 신뢰성 있는 전송을 요구하고 다양한 전파환경에서 신뢰성 있는 음성, 데이터, 영상서비스 등의 다양한 서비스를 제공한다. 하지만 광대역 무선 접속을 지원하는 다중 접속 기술은 DS-CDMA(Direct Sequence Code Division Multiple Access) 시스템에서 시스템 성능을 저하시키는 심벌간 간섭(ISI) 혹은 다중접속간섭(MAI) 신호를 발생시킨다. 이러한 간섭 신호를 개선하기 위해 적응 블라인드 등화 방식을 사용하는데 적응 블라인드 등화 방식 중에서도 가장 많이 이용하는 Constant Modulus Algorithm(CMA)을 적절한 초기화 없이 사용하면 ill-convergence 현상이 나타난다. 본 논문에서는 채널의 효율을 높이기 위한 등화 방식으로 기존의 NCMA 알고리듬을 이용한 새로운 블라인드 등화 방식(Modified NCMA)을 제안하고, 이를 비동기 DS-CDMA 시스템의 다중 사용자 환경에서 컴퓨터 모의 실험 및 성능분석을 하였다. 제안한 등화 방식의 자승오차(SE : Squared Error)의 개선은 spreading gain 31과 127에 대해 cell 내의 사용자가 10명일 때 약 17dB 정도이고, 사용자가 15, 25명으로 증가시킴에 따라 자승오차의 개선은 각각 20dB, 15dB 정도로 전체 평균 자승오차는 약 17.3dB 정도로 개선됨을 확인할 수 있었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.115-116
• /
• 2021

5세대(5G) 이동통신망의 보급과 코로나19 여파로 비대면 시대가 열리면서 가상 증강현실(VR·AR)을 기반으로 한 '실감(XR·Extended Reality)경제가 본격화 되었다. 가상증강현실의 적용분야로는 게임·영화 등 엔터테인먼트, 제조업, 쇼핑 및 전자상거래, 병원·의료기기, 고객서비스, 지식서비스교육 분야 등이 있다. 본 논문은 VR·AR&교육콘텐츠를 키워드로 최근 3년(2018.1.1.~2020.12.31.)간 중앙지, 경제지 등 54개 언론사 기사를 빅카인즈와 데이터랩을 이용하여 관계도 분석, 월간 키워드 트렌드, 연관어 분석을 하였다. 'VR, AR, 에듀테크'를 키워드로 뉴스 검색결과 63,959건 중 '에듀테크' 검색결과 2018년 632건, 2019년 1043건, 2020년 2389건으로 해마다 급 상승하였다. '(AR+VR)AND 교육콘텐츠'에 대한 검색 결과 연관성(키워드 빈도수)이 높은 키워드로는 증강현실(120), 가상현실(116), 인공지능(114), 에듀테크(100), 코로나19(66), 실감형(65), 아이들(61), VR·AR(56), ICT(35), 빅데이터(25) 순으로 가상·증강현실 기술 발전, 코로나19의 장기화, 교육의 효율성으로 에듀테크 분야의 활용도가 급격히 증가함을 확인할 수 있었다.

• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.196-202
• /
• 2016

With increasing LM soybean import, the concern about unintentional gene flow from LM soybean to wild soybean and consequential weedy risk has been growing. Therefore, we conducted this study to characterize seed traits including germination of hybrids resulted from gene flow from LM soybean to wild soybean in comparison with their parents, LM soybean and wild soybean. Pollen-donor LM soybean seeds were much greater and heavier (about 15.0 g of 100 seed weight) than F2 hybrid (5.7 g), while pollen-recipient wild soybean and F1 hybrid seeds were smallest and lightest (about 2.5 g). F2 hybrid was brown, intermediate between yellow LM soybean seed and black wild soybean seed. These findings indicate that F1 hybrid seeds show similar characteristics with wild soybean, while F2 hybrid seeds show intermediate color and size between two parents. F2 hybrid seed showed intermediate traits between two parents in germination and dormancy rates, which were 35% and 65%, respectively. LM soybean showed no dormancy, while wild soybean showed greater than 90% dormancy. This finding indicates that F2 hybrid show intermediate characteristics in seed germination with high dormancy trait, suggesting a potential weediness of hybrids resulted from gene flow from LM soybean to wild soybean.