• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.99-104
• /
• 2010

It is a frequent occurrence in urban traffic - a low-speed collision in which one vehicle hits the back of another. The vehicles often sustain expensive damage. Bumpers can reduce this damage, but only line up so the initial contact in an impact is bumper to bumper. Then the bumpers on the colliding vehicles have to absorb the crash energy, keeping damage away from expensive sheet metal, lights, and other components. In real world accidents, Bumper mismatches in crashes are increasing, and the resulting repair costs from low-speed collisions are escalating. In this study, we investigated the bumper rail height and analyzed their effects on repair cost. Futhermore, Our 16kph front-into-rear crash tests demonstrates bumper mismatch problem.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.141-148
• /
• 2002

Repair were made for front pillar, center pillar and side-step panel for lightweight vehicles with head-on and 40% off-set collision of 15 km/h in a RCAR standard. The salt dilution was sprayed and the compression tests were performed for vehicles with and without anti-corrosional treatment after repair. After 764 hours of salt-dilt sprayed test without using anti-corrosion, the mean penetration depth fur corrosion was shown to be 58% of the thickness. The resulyed decrease in bending stiffness by 10∼20% can cause reduction of the residual life and crash-absorption capability for damaged vehicles. The corrosoin safety tests showed that the anti-corrosional treatment should be made to improve the safety characteristics for a or damaged car.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.79-83
• /
• 2006

The present low speed crash regulations and RCAR test for insurance estimate do not tend to reflect car crash occurred on a road. Therefore, car makers are trying to readjust test standard be similar to a real situation. Passenger cars and SUV vehicles on the market will be subject to this study for car to car crash. In addition, we will discuss improvement of test methods for a low speed crash and direction of bumper design by performing this impact analysis.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.1-9
• /
• 2010

본 연구의 목적은 저속충돌에서 승용차량의 범퍼체결구조를 분석하기 위한 것이다. 차량의 손상성-수리성 향상 연구를 위해 범퍼체결구조가 서로 상이한 3개 차종에 대해 RCAR(세계자동차 수리기술위원회)의 저속충돌시험(전,후면 40% 오프셋 충돌시험) 기준을 적용하였다. 시험결과 충격흡수능력은 직사각형 단면형상을 가지고 그 부분이 범퍼레일에 삽입되는 크래시박스식의 범퍼스테이가 대부분의 차량에 적용되고 있는 다른 두 유형의 범퍼체결구조에 비해 우수하게 나타났다. 우수하게 설계된 직사각형 단면형상을 가지는 범퍼체결구조가 저속충돌사고 시 차량의 손상성-수리성을 향상시킴으로써 승객의 안전성도 강화시킬뿐만 아니라 수리비 절감에도 기여할 수 있다는 것이 본 연구에서 입증되었다.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.190-194
• /
• 2006

This research investigates vehicle structure acceleration and vehicle deformation with RCAR crash test. To investigate vehicle damage characteristics in an individual case, it is possible to RCAR low speed crash test. In this study, two tests were conducted to evaluate difference between RCAR new condition and RCAR old condition. A two large vehicles were subjected to a frontal crash test at a speed of 15km/h with an offset of 40% $10^{\circ}$ angle barrier and flat barrier. The results of the 15km/h with an offset of 40% $10^{\circ}$ angle barrier revealed high acceleration value on the vehicle structure and high repair cost compared to the RCAR 15km/h with an offset of 40% flat barrier. So in order to improve damage characteristics in low speed crash of vehicle structure and body component of the monocoque type passenger vehicles, the end of front side member and front back beam should be designed with optimum level and to supply the end of front side member as a partial condition approx 300mm.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.29-34
• /
• 2005

141,841 car-to-car collision had occurred in 2003, and among the accidents 51,796 were rear-end impact. According to insurance company for loss or damage, more than $60\%$ of rear-end impact victims suffer neck injury. This means at least 31,000 neck injury victims have happened in 2003. More than $97\%$ of the neck injury victims have low severity injury than A.I.S 2. Head restraint, which is designed to limit rearward head movement and equipped on seat, can considerably protect neck from rear-end impact. In this paper we evaluated head restraint geometry and drivers' sitting position according to RCAR standard and carried out low speed volunteer crash test. The crash speed is 4km/h and N.I.C value is used to determine injury probability. Through these research results we can introduce the method to prevent neck injury at rear-end impact.