• 소성∙가공
• /
• 제7권2호
• /
• pp.127-138
• /
• 1998

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network) has been considered. The investigated problem involves the ade-quate selection of the drawing die angle and the correspondent reduction rate in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite ele-ment simulation are selected by using the orthogonal array. Also the orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study it is shown that the application of new technique using ANN and Othogonal array table to the process design of metal forming process is useful method.

• 전산구조공학
• /
• 제9권4호
• /
• pp.15-26
• /
• 1996

항공기용 복합재료는 여전히 많은 응용의 여지를 갖고 있으나 또한 시급히 해결하여야 할 많은 기술적인 문제점을 갖고 있다. 즉 복합재료 항공기용 구조물은 반드시 인증 절차를 밟아야 실제 항공기에 장착/판매될 수 있는데 수치해석 기법에 의한 구조해석을 거친 기본/상세 설계과정과 성형 제작된 실물 구조물에 대해 가혹환경 조건하(95% 상대습도, 70.deg. C 온도에서 30일간의 방치)에서 설계에서 제시한 최대 하중의 150%를 견디어야 하는 까다로운 full-scale testing 및 각종 복합재료관련 coupon test(표 7 참조)들을 수행하여야 한다. 이와 같은 기술적인 문제점들은 향후 연구결과에 따라 충분히 극복할 수 있으나 이와 더불어 현재 각각의 항공기 제작사가 보유하고 있는 material specification, design manual, process standard 등의 규격이 전세계적으로 통일될 수 있는 제도적인 보완이 뒷받침 된다면 복합재료의 응용도 훨씬 앞당겨질 수 있을 것으로 예상된다.

• 한국정밀공학회지
• /
• 제23권10호
• /
• pp.96-102
• /
• 2006

This paper presents the mechanics of the link of a double-action link-type hydraulic die set for the enclosed die forging. Operational principle of the die set in the enclosed die forging is introduced with emphasis on force transmission from the press and the hydraulic system to the material through links, die components and punches. The force exerted on the link is statically investigated and its structural analysis is carried out. The analyzed results are discussed to be used for design of the link system.

• 소성∙가공
• /
• 제10권3호
• /
• pp.235-245
• /
• 2001

Deep drawing process, one of sheet metal forming methods, is very useful in the industrial field because of its efficiency The deep drawing is affected by many process variables, such as blank shapes, shape radii of the punch and die, formability of materials and so on. Especially, blank shape is very important formability factor. In this study, in order to investigate the effects of blank shape, we suggested three kinds of blank shapes and examined friction test about three conditions. We measured punch load distribution according to punch stroke under the conditions of each punch and die shape radii and observed punch load of elliptical cup forming.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.56-60
• /
• 2004

2단 또는 3단형으로 설계되고 있는 KSLV-I 발사체의 단연결부는 직경의 변화에 따라 원뿔대(Truncated cone) 구조물이 필요하다. 원뿔대형 구조물이 발사체의 외피일 경우에는 일반적인 실린더형 동체와는 다르게 공력에 의한 버페팅(buffeting)과 공력가열 등이 추가적인 설계인자로 고려되어야 한다. 복합재료 샌드위치 구조물은 외피의 굽힘 강성이 크고, 일체성형으로 실린더형 혹은 원뿔대형 구좁물을 쉽게 제작할 수 있어 단연결부에 적용되고 있다. 또한 위성어댑터(Payload Adapter)등에도 사용되어 우주발사체에는 매우 일반적인 구조물이다. 복합재료 샌드위치 구조물의 제작과 정적시험을 통하여 구조 특성을 알아보았다. 일체형 샌드위치 구조물의 효율을 높이기 위해서는 프레임과의 체결부를 효율적으로 설계하여야 하며 하중의 종류에 따라서 면재의 적층각도가 중요함을 알 수 있었다.

• 대한기계학회논문집
• /
• 제7권3호
• /
• pp.249-256
• /
• 1983

The study is concerned with the analysis of sheet metal for the prediction of limit drawing ratio and forming load. The direct redrawing process is analyzed by using an equilibrium approach and strain increment theory both for non-workhardening material and for workhardening material. Computations are carried out numerically for the workhardening case. Limit drawing ratios are predicted for some chosen variables. The forming loads are also computed with respect to punch travel. Then the predicted loads are compared with the experimental results. For ordinary lubricated conditions, the comparison shows reasonable agreement between the theory and experimental observation. It is also shown that limit drawing ration can be increased by using a greater die angle and proper lubrication significantly reduces the punch load. Finally numerical results show that material of greater R-value and strain-hardening exponent(n)is better for direst redrawing of sheet metal.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1129-1133
• /
• 2001

An upper bound elemental technique(UBET) has been carried out to predict the forming load, the deformation pattern and the extruded length of the lateral extrusion of a spider for the automotive universal joint. For the upper bound analysis, a kinematically admissible velocity field(KAVF) is proposed. From the proposed velocity field, the upper bound load, the deformation pattern and the average length of the extruded billets are determined by minimizing the total energy consumption rate which is a function of unknown velocities at each element. Experiments are carried out with antimony-lead billets at room temperature using the rectangular shaped punch. The theoretical prediction of the forming load, the deformation pattern and the extruded length are good in agreement with the experimental results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.346-349
• /
• 2001

Nowadays the amount of plastic products is increasing in modern industry. Plastic materials are continuously developed to satisfy the mechanical, physical, and chemical properties. The increasing application of plastic parts in automobile and aerospace industries is due to the fact that it can reduce the structural weight and can lessen the environmental contamination. Among many manufacturing technologies for plastic parts, the injection molding process is very attractive because of its low cost and short production time. Through various analyses of resin flow and molding process for the conventional gate and cooling mechanism, a new type of mold was designed which had different gate location and cooling systems. Newly designed ball seat has an excellent performances, i.e. diminished weld-line, residual stress density, higher magnitude less crack propagation and smaller dimensional contractions effect.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.846-849
• /
• 2000

In this paper backward extrusion process with lower die rotation was studied to improve the conventional backward extrusion problems ; requirement of large forming machine, the difficulty to selecting of die material caused by high surface pressure, high cost of forming machine caused by improvement of noise and vibration, and etc. In this experiment, model material, plasticine, was used of specimen. The result values of torsional and conventional backward extrusions were analyzed and compared. FE-simulation is used for analysis with DEFPRM-3D. These results show that the torsional backward extrusion is very useful process because this process can obtain the homogeneous deformation, low forming load. Decreasing forming load improves die life and makes it possible to use press of relatively low capacity. Also this process can reduce corner cavity, improve the initial cast-structure, owing to the high deformation and uniform starin distribution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.385-388
• /
• 2000

During the deep drawing process an initially flat blank is clamped between the die and the blank holder after which the punch moves down to deform the clamped blank into the desired shape. In general, sheet metal forming may involve stretching, drawing, bending or various combinations of those basic modes of deformation. The deformation problems of sheet metal working involve non-linearity in geometry and material. In this work, The punch load and thickness strain of electro-galvanized sheet steel (SECD) for elliptical deep drawing are examined under the various process conditions including, punch shape radius, die shape radius. The changes of punch load and thickness strain distribution of the deformed elliptical cup are affected by the size of each die shape radius.