• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.2
• /
• pp.91-95
• /
• 2000

The effects of argon gas flow on the axial temperature gradient near the interface, the oxygen concentration, and the radial oxygen uniformity was investigated for 8-inch CZ silicon growth. As argon flow rate was increased, the temperature gradient was increased in the crystal near the crystavmelt interface and the oxygen content in the crystal was decreased. But the radial oxygen uniformity was deteriorated. It was found that argon flow is one of the important growing parameters to affect the quality of crystals such as oxygen content and uniformity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.324-333
• /
• 1997

Porous alumina specimens with 80~92% relative densities were prepared from ultrasonic spray pyrolyzed alumina Powders by sintering at $1600^{\circ}$~ $1700^{\circ}C$. The exaggerated grain growth appeared to high sintering temperature and long soaking time. The microstructural development during sintering was investigated using image analysis. In the study of grain growth kinetics for sintering for spray prolyzed alumina powder, the activation energy for normal grain growth was 386.77 kJ/mol.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.160-161
• /
• 2009

마이크로웨이브 플라즈마 화학기상증착(MPCVD) 시스템을 이용하여 실리콘 웨이퍼 위에 나노결정질 다이아몬드 박막을 증착하였다. 공정압력, 마이크로웨이브 전력, Ar/$CH_4$ 조성비를 일정하게 놓고 기판온도를 $400^{\circ}C$ 및 $600^{\circ}C$, 증착시간을 0.5, 1, 4시간으로 변화시켜 박막의 성장 과정을 관찰하였다. 성장 초기에 약 30 nm 크기의 나노 결정립으로 이루어진 구형 입자가 형성되어 시간의 경과에 따라 입자들이 성장하고 4시간 이후에는 입자들이 서로 붙어 완전한 박막을 형성함을 관찰하였다. 같은 증착시간에서 기판온도가 $400^{\circ}C$에서 $600^{\circ}C$로 증가함에 따라 다이아몬드 입자의 크기가 증가하였다. 시간의 경과에 따라 기판 위에서 입자들이 차지하는 면적의 비율은 증가하였다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.319-326
• /
• 1995

초고진공에서 Si(100)-2X1 기판 위에 Pt를 약 100$\AA$의 두께로 증착한 후 in-situ로 열처리하는 고상에피택셜 성장법으로 PtSi 박막을 형성시켰다. XRD와 XPS 분석 결과 $200^{\circ}C$로 열처리한 시료에서는 Pt3Si, Pt2Si와 PtSi의 상이 섞여 있었으나 50$0^{\circ}C$로 열처리한 시료에서는 PtSi의 단일상만 확인되었으며, 형성된 PtSi 박막은 주상구조와 판상구조의 이중구조를 나타내었다. 기판 온도를 $500^{\circ}C$로 유지하면서 Pt를 증착한 후 $750^{\circ}C$에서 열처리한 경우에는 판상구조를 갖는 양질의 PtSi 박막이 에피택셜 성장되었다. HRTEM분석 결과 에피텍셜 성장된 PtSi와 기판 Si(100)의 계면은 PtSi[110]//Si[110], ptSi(110)//Si(100)의 정합성을 가졌다. 판상구조를 갖는 PtSi상의 에피택셜 방향은 기판과 열처리 온도에는 의존하나 열처리 시간에는 무관한 것으로 나타났다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.46-56
• /
• 1994

The characteristics of flows, temperatures, concentrations of the boron are numerically studied when uniform axial magnetic fields are applied in the Czechralski crucible. The to governing factors to the flow regimes are buoyancy, thermocapillarity, centrifugal forces, magnetic forces, diffusion coefficient and segregation coefficient of the boron. Since the concentration of the boron is so low that buoyancy effects are negligible, it cannot affect the flow and temperature fields. From the fact that the flow fields are rotationally symmetric, two velocity components in the meridional plane and the circumferential velocity are calculated together with the temperature in the steady state. Based on the known velocity and temperature distributions the unsteady concentration distributions of the boron are calculated. As the strength of the magnetic is increased, the flow velocities are decreased. Circumferential velocities are large near the crucible side-wall and in the region below the rotating crystal. Steep temperatures gradient near the edge of the rotating crystal causes the Marangoni convection. It has been found out that the convection characteristics affects the unsteady transport phenomena of the boron.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1013-1016
• /
• 2005

ZnO nanostructure was fabricated by catalyst-free method using Zn powder in air. The growth temperature was controlled from 450$^{\circ}$C to 600$^{\circ}$C, and the structural and optical properties were investigated by scanning electron microscopy (SEM), photoluminescence (PL), energy dispersive X-ray spectroscopy (EDX) and cathodoluminescence (CL). From all samples both ZnO tetrapods and clusters were observed. No significant dispersion was observed from the ZnO tetrapods, however, ZnO clusters show considerable change in density and size. From the EDX results, atomic composition difference was found. The clusters have O-deficiencies, while tetrapods have stoichiometric composition. Strong luminescence was observed at room temperature. From room temperature PL, UV emission at 380 nm and green emission at 500 nm were observed, and the intensity ratio ($I_{uv}/I_{green}$) increased as growth temperature increases. CL measurements show that the UV emission is closely related with tetrapods and the green emission is dominated from the clusters.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.290-296
• /
• 2003

The heteroepitaxial growth of crystalline 3C-SiC on 6H-SiC substrates using high purity silane ($SiH_4$) and prophane ($C_3H^8$) was carried out by thermal chemical vapor deposition, and growth characteristics were investigated in this study. In case that the flow ratio of C/Si and flow rate of $H_2$ were 4.0 and 5.0 slm, respectively, the growth rate of epilayers was about 1.8 $\mu$m/h at growth temperature of $1200^{\circ}C$. The Nomarski surface morphology, X-ray diffraction, Raman spectroscopy, and photoluninescence of grown epilayers were measured to investigate the crystallinity. In this study, the high quality of crystalline 3C-SiC heteropitaxial layers was observed at growth temperature of above $1150^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.20-20
• /
• 2008

최근 LEDs가 동일 효율의 전구에 비해 에너지 절감 효과 크며 신뢰성이 뛰어나다기 때문에 기존 광원을 빠르게 대체해 나가고 있다. 특히 자외선 파장을 가지는 LEDs는 발열이 낮아 냉각장치가 필요 없으며, 수명이 길어 기존 UV lamp에 비해 많은 장점을 가지고 있기 때문에 많은 관심을 밭고 있다. 그럼에도 불구하고 자외선 LEDs는 제조 단가가 높고 power가 낮아 소요량이 많은 등 아직 해결해야 할 부분이 많기 때문에 이를 해결하기 위해 여러가지 재료와 다양한 구조가 고려되고 있다. 그 중 ZnO는 II-VI족 화합물 반도체로써 UV영역의 넓은 밴드갭(3.37eV)을 가지는 투명한 재료이다. 특히 ZnO는 60meV의 큰 엑시톤 결합에너지를 가지며, 가시광 영역에서 높은 투과율을 가지고, 상온에서 물리적, 화학적으로 안정하기 때문에 UV sensor, UV laser, UV converter, UV LEDs 등 광소자 분야에서 연구가 활발히 진행되고 있다. ZnO가 광소자의 발광재료로써 높은 효율을 얻기 위해서는 결정성을 높여 내부 결함을 감소시키며, 발광 면적을 높일 수 있는 구조가 요구된다. 특히 MOCVD 법으로 성장한 나노막대는 에피성장되어 높은 결정성을 기대할 수 있으며, 성장 조건을 조절함으로써 나노막대의 aspect ratio와 밀도 제어할 수 있기 때문에 표면적을 효과적으로 넓혀 높은 발광효율을 얻을 수 있다. 본 실험에서는 MOCVD 법으로 실리콘과 사파이어 기판 위에 다양한 성장 온도를 가진 나노구조를 성장 시키고 온도에 따른 형상 변화와 특성을 평가하였다. ZnO 의 성장온도가 약 $360^{\circ}C$ 일 때, 밀도가 조밀하고 기판에 수직 배열한 균일한 나노막대가 성장되었으며 우수한 결정성, 광학적 특성이 나타남을 SEM, TEM, PL, XRD를 사용하여 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.16 no.2
• /
• pp.140-143
• /
• 2006

Single crystalline $CoFe_2O_4$ thin films on (100) MgO substrates were fabricated using a rf magnetron sputtering method. The deposited films were investigated for their crystallization by X-ray diffraction, Rutherford back-scattering spectroscopy and field emission scanning electron microscopy. When a cobalt ferrite film was deposited at the substrate temperature of $600^{\circ}C$, squared grains of about 200 nm were uniformly distributed in the film. However, the grains became irregular and their sizes also varied from 30 to 150 nm when the substrate temperature was $700^{\circ}C$. Hysteresis loops of a film deposited at $600^{\circ}C$ showed that the magnetically easy axis of the film was perpendicular to the substrate surface. Except for the squareness ratio, magnetic properties of the cobalt ferrite films grown by the present rf sputtering method were as good as those of the films prepared by a laser ablation method: The in-plane and perpendicular coercivities were 283 and 6800 Oe, respectively. As the thickness of the deposited film increased twice, the saturation magnetization became double but the coercivity remained unchanged. However, deposition of the Co ferrite films with a higher rf powder decreased the squareness ratio and the perpendicular coercivity of the films.

• Korean Journal of Environmental Biology
• /
• v.37 no.2
• /
• pp.119-128
• /
• 2019

The morphological characteristics of the bloom-forming dinoflagellate Akashiwo sanguinea isolated from Jangmok Harbour, Geoje in Korea was examined using light and scanning electron microscope (SEM), and its large subunit (LSU) rDNA was sequenced. Additionally, investigation was done on the effects of temperature and salinity on the growth of A. sanguinea. The cells were dorso-ventrally compressed up to 54.7-70.3 ㎛ long and 31.5-48.5 ㎛ wide. The epicone was conical while the hypocone was separated into two lobes. The nucleus was positioned at the center of the cell. The yellow-brown chloroplasts radiated close to the cell center. SEM observation indicated that A. sanguinea has an e-shaped apical groove. Molecular phylogeny based on LSU rDNA gene sequences revealed that the A. sanguinea strains isolated from Jangmok Harbor were classified in the clade of ribotype A. The maximum growth rate (0.50 day^-1) was observed at 20℃ and 20 psu, while the maximum cell density (1,372 cells mL^-1) was observed at 25℃ and 30 psu. This indicates that the blooms of A. sanguinea ribotype A in Korean coastal area are affected by water temperature, rather than the salinity.