• Composites Research
• /
• v.35 no.4
• /
• pp.269-276
• /
• 2022

In this paper, a composite stiffened panel was fabricated using a three-dimensional weaving method that can reduce the risk of delamination, and mechanical properties such as buckling load and natural frequency were investigated. The preform of the stringer and skin of the stiffened panel were fabricated in one piece using T800 grade carbon fiber and then, resin (EP2400) was injected into the preform. The compression test and natural frequency measurement were performed for the stiffened panel, and the results were compared with the finite element analyses. In order to compare the performance of 3D weaving structures, the stiffened panels with the same configuration were fabricated using UD and 2D plain weave (fabric) prepregs. Compared to the tested buckling load of the 3D woven panel, the buckling loads of the stiffened panels of UD prepreg and 2D plain weave exhibited +20% and -3% differences, respectively. From this study, it was confirmed that the buckling load of the stiffened panel manufactured by 3D weaving method was lower than that of the UD prepreg panel, but showed a slightly higher value than that of the 2D plain weave panel.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.61-67
• /
• 1999

물론 이 글이 콘크리트 분야에 종사하는 사람이 알아야 하는 모든 것을 언급하지는 않는다 ; 본인의 저서 'Properties of Concrest'의 판매에 나쁜 영향을 주고 싶지도 않다. 내가 원하는 것은 콘크리트를 제작할 때 우리 모두가 주의를 기울여야 하는 중요한 몇 가지를 강조하는 것이다. 포트랜드 시멘트만 들어있는 보통의 콘크리트가 사용되는 시대는 이미 사라져가고 있고, 단순한 응용을 제외하고는 곧 사라질 것이다. 대부분의 경우는 가능한 일련의 시멘트계 재료 중에 선택을 해야 한다. 혼화제, 특히 고성능 감수제는 중요한 역할을 한다. 물을 많이 첨가하는 것이 작업성을 높이는 유일한 방법도 아니고 최선의 방법도 아니다. 성능을 기준으로 한 기준설정에 관여하는 사람은 이 모든 것을 명심해야 한다. 그렇지 않으면 시방기준에 명시된 규정과 근원적인 요구사항이 잘못 이해되고, 시험배합을 통해서만 잘못되었다는 것이 분명해지게 된다. 그 단계에서는 예상보다, 비록 틀린 것이지만, 더 많은 비용이 들 것이다. 시방규정은 통상적인 조항 외에 갈수록 내구성에 관심을 더 많이 보인다. 가끔은 내구성이 구조물의 기대수명에 대한 연수로 표현되기도 한다. 이 숫자를 배합재료에 관한 자료로 변환시키는 데는 여러 배합재료 및 배합비가 콘크리트의 성질에 미치는 영향에 관하여 깊이 알고 있어야 한다. 모든 사람이 그러한 구체적인 지식을 가질 필요는 없지만, 각 조직마다 상의할 수 있는 사람은 있어야 한다. 엔지니어가 언급한 규정이 따로 없고, 도면의 주를 참고하거나 구체적인 절이 명시되지 않은 상태에서 국가 시방기준을 통해서 조금씩 내용을 수집해야 하는 경우의 상황은 더 난감하다. 이러한 경우는 배합설계나 재료의 선택을 책임지고 있는 사람이, 환경에 대한 노출조건 및 필요한 배합재료에 관하여 잘 알고 있어야 한다. 일반적으로 말해서 콘크리트의 배합은 필요한 특정용도에 따라서 선택되어야 한다. 이것이 사람들이 고성능 콘크리트라 부르는 것이라고도 할 수 있다. 내 생각으로는 고성능 콘크리트와 보통 콘크리트의 경계는 곧 사라질 것이고, 앞으로 대다수 고객에게 주문 콘크리트 혹은 맞춤 콘크리트를 제공해야 할 것이다. 만약 이러한 접근방식에 더 많은 비용이 든다면, 그것을 보상하는 방법은 콘크리트에 대한 이미지를 높이고, 또한 앞으로 모든 용도에 계속적으로 이용될 수 있도록 하는 것이다. 아니면 구조물을 보수하고, 보수한 것을 또 보수하고, 해체하고 해야 할 것이다. 결국은 재활용 골재를 생산할 수 있다고 웃으면서 말할지 모르지만, 이런 식으로는 불만을 지닌 사용자가 콘크리트를 가능하면 멀리하게 만들 것이다. 콘크리트는 절대 심각한 경쟁에 처하지 않을 것이라는 가정은 무모하다. 내가 배합비에 대해서 강조해 왔지만, 이것으로 최종적으로 좋은 콘크리트가 된다는 보장은 없다. 비빔에서는 일반적으로 큰 문제는 없지만 골재에 함유된 수분을 더 잘 제어해야하고 주의를 게을리하지 말아야 한다. 비빔시간은 모든 재료가 잘 섞이기에 충분해야 하는데, 마이크로 실리카가 포함되어 있을 경우에는 더욱 그렇다. 단위시간당 믹서의 작업량을 높이기 위해서 충분히 비비지 않아서는 안된다. 그리고 마지막으로, 콘크리트가 타설되고 다져진 후, 적절하게 양생이 되어야 한다. 마이크로 실리카가 배합에 사용되었을 경우에는 특히 그러하지만, 이것은 모든 콘크리트에서 양생을 잘하는 것이 피복부에서 유해물질이 유입되는 것을 최소화하고 철근을 완전히 보호하는데 있어서 절대적이다. 내가 지금까지 말한 것은 콘크리트에 관한 충분한 지식과 이해를 필요로 한다. 이것은 당연하고 또한 적절한 것이라고 생각한다. 왜냐하면 더 이상 콘크리트를 수준낮은 싸구려 재료로 간주해서는 안되기 때문이다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.553-561
• /
• 2020

Water-soluble rubber asphalt-based waterproofing material, which is one of the waterproofing materials for building structures, is mainly used indoors (toilet, kitchen, balcony, etc.). In general, asphalt-based materials are used for non-exposed installation, rather than as exposed type as they do not deviate from their usual basic black pigmentation, and water-soluble rubber asphalt-based coating waterproofing materials are basically limited to indoors because of their low physical properties. Accordingly, in order to improve the tensile and elongation properties, a silane coupling agent, an inorganic filler, and a processor oil w ere added to improve the physical properties, and accordingly, the basic physical properties of the outdoor coating waterproofing material quality standard were analyzed. As a result, the water-soluble rubber asphalt coating waterproofing material compared with the exposure quality standard showed a result that exceeded the basic physical property quality standard of silicone rubber in all items under test evaluation, but the tensile strength and tear strength of the first class of urethane rubber were chloroprene. It was found that the performance compared to the quality standards of rubber-based tear strength was about 34.2% to about 40.8%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.95-107
• /
• 2016

The axle weight of a vehicle in motion can be measured with a low-speed or high-speed weigh-in-motion (WIM). However, the axial load dynamically change depending on the vehicle's characteristics-such as the chassis or axle structure-or the characteristics of the driving environment such as road flatness. The changes in dynamic load lead to differences between the vehicle's weight measured at rest and the vehicle's weight measured in motion. For this Study, an experiment was conducted with an instrumented vehicle to analyze the range of errors caused by uncontrollable environmental factors by identifying the characteristics of the dynamic load changes of a vehicle in motion, and determine the appropriate scale for the accuracy evaluation of a high-speed WIM, as a preparatory research for the introduction of unmanned overweight enforcement systems in the future. The key findings from the experiment are summarized as follows. First, The gross weight of the tested vehicle changed by approximately 1% at low velocities and approximately by 4% at high velocities, and the vehicle's axle weight changed by approximately 1-3%, at low velocities and by 2-9% at high velocities. A single axle showed larger weight changes than individual axles in a group. Secondly, The vehicle's gross weight and the axle weight on the impact section were up to eight times and three-to-twelve times higher, respectively, than its gross weight and the axle weight on the flat section. The vibration frequency of the vehicle's dynamic load was measured at between 2.4 and 5.8Hz, and found to return to the normal amplitude after moving approximately 30 meters.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.227-232
• /
• 2014

There are three essential components of eLoran: dLoran, data map of ASF, and the Loran data channel. Particularly, dLoran improves navigation accuracy, which is the core technology of eLoran systems. The requirement of HEA's absolute accuracy, less than 20 meters, can be satisfied via dLoran measurements and their corrections. In this study, dLoran measurements using the Pohang Loran-C (9930M) station signal were conducted at Yeongil Bay. We established a dLoran reference station at Homigot Management Office for navigation aids within the Bay. We estimated the effectiveness of the dLoran between the reference site (Homigot Management Office) and a test site (Heunghwan beach) by measuring TOAs. We verified that the TOA data measured at these two regions were highly correlated. The temporal differences in the data between the dLoran reference station and test site were about 10~30 ns per day, which is equivalent to a ranging error of 3~9 m. This result shows that eLoran can meet the requirement of 8~20 meters position accuracy for maritime HEA by correcting the ASF at the user's receiver.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.263-269
• /
• 2016

BACKGROUND: The personal protective equipments (PPEs) is the most important factor for reducing the pesticide exposure during the preparation and spraying of pesticides. This study was to investigate the retention, repellence and penetration of protective clothing of PPEs according to the ISO 22608 'Liquid penetration resistance-pipette test. Protective clothing for agriculture worker is very important for their health. However, test method for measurement of protective clothing is not presented in Korea. METHODS AND RESULTS: In order to measure the retention, repellence and penetration of protective clothing, a apparatus for pipette method in accordance with the ISO Guideline was prepared. The test was conducted at $25{\pm}5^{\circ}C$, $60{\pm}10%$ of relative humidity and pipette applied to a apparatus was validated to take exact amount(0.2 mL). The retention, repellence and penetration of five types of protective clothing and one type of shirt were analyzed by GC/MS. Pendimethalin(5% a.i, emulsion) was used as a test pesticide to measure above factors. The retention were less than 11.0% with the exclusion of two types(F4 and shirt) and the repellency was more than 67.0% with the exclusion of shirt material. The penetration was less than 5.4%, however, that of shirt was 66.7%. CONCLUSION: This results indicated that all protective clothing were suitable to use as PPEs according to the criteria specified by ISO Guide 22608. However, shirt was not suitable due to high penetration. This test method established for measurement the retention, repellence and penetration of protective clothing will help to establish the test notice of pipette method.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.19-25
• /
• 2012

The fire retardant bamboo charcoal (BC) boards were manufactured for interior building materials in this study, The BC boards were manufactured by mixing and pressing of the bamboo charcoal, expanded vermiculite, and inorganic binder. The combustion behaviors of the BC boards were investigated using a cone calorimeter at an incident heat flux of 50 kW/$m^2$. Three building materials (plywood, BC board of Japan, and gypsum board) were used to observe the burning behaviors of weight loss, total heat release rate, and maximum heat release rate. Surface test and toxicity evaluation of the BC board were also conducted. The weight loss of the BC board (12.0%) was lower than the nonflammable gypsum board (15.6%) after burning of 10 min. Total heat release of the BC was 3 MJ/$m^2$ (KS standard 8 MJ/$m^2$) and total heat release rate of the BC was 20 kW/$m^2$ (KS standard 200 kW/$m^2$). Therefore, the BC boards were adjustable for the third-grade flame retardant building materials. External appearance change and mouse toxicity were not found in the BC boards after the combustion test.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.23-29
• /
• 2017

Solar and wind energy among the renewable energy produce irregular power because resource is difficult to control. When connected to grid have unstable. However, when the fuel cell system is connected to grid more stable because regular frequency and output power based on controllable hydrogen energy. To using fuel cell system in the household, it is important that the safety performance of power conditioning system(PCS) and it is important that evaluation method of electromagnetic compatibility(EMC). In this study, we consider that introduce power-frequency magnetic field immunity test before analyzed that compare with the EMC of the international standards and KGS AB 934 PC53. Also, we conduct that actual assessment and study on available the quantitative analysis as using complementary indicator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.752-757
• /
• 2017

Analysis has been performed for the penetration of a long-rod into MMC/Ceramic layered armour system with several shot test and a series of simulations. Two types of MMC plate have been fabricated by a liquid pressing method; A356/45%vol.%SiCp with a uniform distribution of SiC particle and Al7075/45%vol.B4Cp with B4C particle. The mechanical properties were measured with the high-speed split Hopkins bar test, hardness test and compression test. The popular Simplified Johnson-Cook model was adopted to represent the material characteristics for FEM simulations. The performance of the MMC applied armour system has been made by comparing with the semi-infinite mild steel target using the depth of penetration(DOP). The results show that placing ceramic front layer provides a certain gain in protection, and that placing another ductile front layer provides a further gain. The application of MMC is found to be attractive.