• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.386-393
• /
• 2018

The Korean military supplies industry tends to become limited in terms of its development to specific areas in line with strategic promotion policies of the local private direct industrial site. However, the relation between base and small cluster is getting lower of the local industrial site. In this study, information related to authorized test reports for munitions was collected through the military quality information system and subjected to social network analysis(SNA). SNA was performed through the relationships among defense quality assurance agencies, test institutions, contracts and cooperative firms through UCINET's Two-Mode Network. In the field of weapon systems, the median technology industry, and the test analysis dependent are high in Seoul, so the analysis revealed that strengthening the infrastructure for test analysis is needed. Also, it was deemed necessary for government-driven political support. Besides, the field support system was efficiently utilizing a relatively local test analysis. It was analyzed that they are overcoming the regional boundaries of small clusters by strategically changing their contract and cooperative firms' status. The research found some spatial inconsistencies between base and small clusters in the military supplies industry, and it was judged that a political suggestion was needed.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.04a
• /
• pp.417-426
• /
• 2000

정보 시스템 개발은 크게 계획, 분석, 설계, 구축의 네 단계로 이루어진다. 이중 사용자 요구사항을 파악하는 분석 단계는 시스템개발 수명주기에 있어 가장 큰 비중을 갖는다. 또한 수명주기의 초기 단계에서 발견되지 못한 결점은 개발이 진행될수록 수정하는데 많은 비용과 노력을 필요로 하게 되어 분석 결과물의 품질은 전체 시스템 품질에 큰 영향을 미치게 된다. 분석 단계의 주요 작업은 데이터 모델링과 프로세스 모델링이다. 이중 데이터 모델리을 위한 지식베이스 시스템 개발에 대한 노력은 기존 연구에서 수행되어 왔으나 프로세스 모델링을 위한 지식베이스 시스템에 대한 연구는 부족하다. 특히 최근 User Interaction이 많은 시스템이 점점 증가하고 있는 추세에 적합한 프로세스 모델링 방법과 지식베이스에 대한 연구가 필요하다.이 연구에서는 사용자 상호작용이 많은 시스템 환경에서의 프로세스 모델링을 위한 절차를 제안하고, 제안된 절차를 효과적으로 지원하고 결과물의 품질을 보증하기 위한 지식베이스 시스템을 구축한다. 모델은 다음의 주요 작업들로 구성된다: 이벤트 분석, 프로세스 분석, 이벤트/프로세스 상호작용 분석. 이벤트 분석은 영향을 주는 이벤트와 그로 인해 수행되어야 하는 업무 절차(Response)를 파악한다. 프로세스 분석은 이벤트 분석과는 독립적으로 수행되며 상위 수준의 업무부터 최하위 수준의 프로세스까지 도출한다. 이벤트/프로세스 상호작용 분석은 이벤트와 프로세스의 분석 결과를 상호 검증하기 위하여 실시된다. 제안된 프로세스 모델링 방법을 지원하기 위한 지식베이스 시스템을 웹 환경에서 구현하였다. 구현된 지능형 robot과 spider 등으로 구성된, 신뢰성 있고 지능적인 MP3 검색 엔진 지원 시스템의 설계와 구현 결과 그리고 성능 등을 종합적으로 요약한다.실어증 환자들은 화시적 대명사를 조응적 대명사보다 더 잘 처리하는 동일한 결과를 보였다. 이러한 실험 결과들은 실어증 환자들이 뇌손상으로 인해 문법적 언어처리에는 어려움을 보이지만 비언어적인, 세상 지식과 관련된 화시적 대명사의 처리는 가능할 것이라는 가설을 뒷받침 해준다. 또한 이러한 실험 결과를 통해 대명사의 기능적인 측면에서 화시와 조응의 처리가 구분되어 있음을 보여준다.l mechanism is concentrate on only the reaction zone. As strain rate and CO2 quantity increase, NO production is remarkably augmented.our 10%를 대용한 것이 무첨가한 것보다 많이 단단해졌음을 알 수 있었다. 혼합중의 반죽의 조사형 전자현미경 관찰로 amarans flour로 대체한 gluten이 단단해졌음을 알수 있었다. 유화제 stearly 칼슘, 혹은 hemicellulase를 amarans 10% 대체한 밀가루에 첨가하면 확연히 비용적을 증대시킬 수 있다는 사실을 알 수 있었다. quinoa는 명아주과 Chenopodium에 속하고 페루, 볼리비아 등의 고산지에서 재배 되어지는 것을 시료로 사용하였다. quinoa 분말은 중량의 5-20%을 quinoa를 대체하고 더욱이 분말중량에 대하여 0-200ppm의 lipase를 lipid(밀가루의 2-3배)에 대

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.179-188
• /
• 2007

Recently, the concern on the receipt of poor ready-mixed concrete in the construction field and the durability of concrete has been increased. Based on the such background, a large number of measuring methods of water content for fresh concrete have been developed and enforced in a developed country. In this study, to investigate practicality for quality control of ready-mixed concrete among various water content measurement techniques, microwave range method, air meter method and capacitance measurement method as measuring methods of water content were selected. Then, it was evaluated estimating performance of water content according to the change of binder types, fine aggregate types, absorption ratio, water content and water-binder ratio in series I and II. Also, it was examined influence on error occurrence of water content according to change of properties of used materials in series III. Finally, based on this study, it was proposed fundamental data to utilize measurement technique of water content to quality control of ready-mixed concrete in construction field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.492-500
• /
• 2018

The performance evaluation of cold weather clothing is mainly carried out with thermal resistance. However, the results of the revised test method regarding the same specimen were decreased compare to previous one. In addition, there were deviations of the results among the authorized testing institutes according to the different interpretation of the KS test method. This makes it a considerable difficulty to the quality assurance of combat supplies. The purpose of this study is to minimize the variation of the results before and after the revision by analyzing the cause of the decrease in the heat insulation rate according to the revised test method. For this purpose, the difference between the test conditions before and after the revision of KS is analyzed and the possible results are reviewed. In addition, we want to minimize the result deviation between testing laboratories by analyzing the cause of the result deviation between test laboratories according to arbitrary interpretation of the standard. Based on this, we propose a standardized test method to prevent the decrease of the heat insulation rate by checking the pre-revision test method and the condition with the least deviation.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.65-72
• /
• 2009

Due to the popularity of mobile devices and advances in wireless communication technologies, a mobile ad hoc network has received a lot of attention. In the existing data replication management research, the use of a replica has been shown to be an efficient technique for improving data accessibility. However, to use a replica in ad hoc networks, the data consistency between the original data and the replica should be guaranteed. In the traditional research, a mobile node should check an original data whether the data is updated or not. However, It may be costly or sometimes impossible to check the original data. In the case of the time constraint applications, the checking cost can cause more serious problem. In this paper, we propose the time-guarantee based cache invalidation schemes for time constraint applications and the threshold based compensation method to enhance the time-guarantee based scheme. The proposed schemes can remove the "rollback" problem. Simulation results show that our schemes outperform the previous ones in terms of access time with little loss of data currency.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.28-34
• /
• 2014

Automatic transmission fluid (ATF) is used for automatic transmissions in the vehicle as the characterized fluid. Recently, the vehicle manufacture usually guarantee for fluid change over 80000~100000 km mileage or no exchange, but most drivers usually change ATF below every 50000 km driving in Republic of Korea. It can cause to raise environmental contamination by used ATF and increase the cost of driving by frequently ATF change. In this study, we investigate the various physical properties such as flash point, fire point, pour point, kinematic viscosity, cold cranking simulator, total acid number, and metal component concentration for fresh and used ATF after driving (50000 km, 100000 km). The result showed that the total acid number, pour point, Fe, Al and Cu component had increased than fresh ATF, but 2 kind of used oil (50000 km and 100000km) had similar physical values and metal component concentration.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.537-544
• /
• 2018

A national comprehensive aviation test center is being constructed for the purpose of flight tests for development and modification of aircraft or flight inspections for the development of navaids. Flight testing is a high-risk task, so strict risk management processes are required prior to operation. In addition, since the flight test center is subject to the airdrome regulations under the current law, the introduction of the safety management system will enhance safety as usual in ordinary airports. The establishment of a safety management system based on ICAO criteria is an optimal means of ensuring safe and effective operation of the test center and may mitigate the risks that may arise during flight testing. This paper focuses on risk assessment and mitigation required for safety management at the flight test center. We conducted risk assessments on the flight hazards identified in the previous study. Then the high risk group of hazards were selected and risk mitigation techniques such as avoidance, reduction, acceptance, and control were applied.

• Journal of the Korean Society of Radiology
• /
• v.15 no.3
• /
• pp.307-312
• /
• 2021

In nuclear medicine, radioactive isotope tracers are administered to the human body to obtain and evaluate disease morphological information and biological function information. Dose calibrator is a device used to measure the radioactivity of a single nuclide in medical institutions. Administration of the correct dose to the human body acts as an important factor in diagnosis and treatment, and measurement through a dose calibrator before administration is the most important factor. Dose calibrator performs daily quality control after installation in each medical institution. Quality control is a means of guaranteeing quality control after installation, and is essential for improving the quality of treatment and promoting patient safety. Therefore, accurate and standardized performance evaluation methods should be established. In this study, 3D printing was used for quantitative evaluation of quality control by increasing the accuracy and standardization of quality control. When the 3D printer was installed and reproducibility was tested, the error range of the expected value and reading value decreased by 0.302% in the F-18 nuclide and 0.09% in the ^99mTc-pertechnate nuclide than when the 3D printer was installed. The error rate for other nuclides was also found to have a low error rate for reproducibility tests when 3D printing was installed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.29-40
• /
• 2005

According as base of digital hologram has been magnified, discussion of compression technology is expected as a international standard which defines the compression technique of 3D image and video has been progressed in form of 3DAV which is a part of MPEG. As we can identify in case of 3DAV, the coding technique has high possibility to be formed into the hybrid type which is a merged, refined, or mixid with the various previous technique. Therefore, we wish to present the relationship between various image/video coding techniques and digital hologram In this paper, we propose an efficient coding method of digital hologram using standard compression tools for video and image. At first, we convert fringe patterns into video data using a principle of CGH(Computer Generated Hologram), and then encode it. In this research, we propose a compression algorithm is made up of various method such as pre-processing for transform, local segmentation with global information of object image, frequency transform for coding, scanning to make fringe to video stream, classification of coefficients, and hybrid video coding. Finally the proposed hybrid compression algorithm is all of these methods. The tool for still image coding is JPEG2000, and the toots for video coding include various international compression algorithm such as MPEG-2, MPEG-4, and H.264 and various lossless compression algorithm. The proposed algorithm illustrated that it have better properties for reconstruction than the previous researches on far greater compression rate above from four times to eight times as much. Therefore we expect that the proposed technique for digital hologram coding is to be a good preceding research.