• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.629-637
• /
• 2016

In this paper, an investigation was conducted to evaluate the acoustic performance of low height noise barriers installed adjacent to rails; an easy-to-use approximation formula was suggested for the evaluation of insertion loss (IL), instead of using the boundary element method. At first, the acoustic performance of the low height noise barriers was measured in an anechoic chamber using a scaled down model; the overall IL according to the source location was analyzed with the equivalent IL contour line. Using the measurement results obtained from the scaled down model, an approximation formula was suggested for the IL of low height noise barriers having various shapes. Also, the prediction program was validated through a comparison between the actual measurement results in the anechoic chamber and the prediction results. Finally, using the prediction program, an approximation formula for IL was suggested for the low height noise absorption barriers. Considering the frequency characteristics of the noise sources of the train, the absorptive low height noise barriers have a 'ㄱ' type shape, a height of 1.0m, and a length of 0.5m when they are installed on the structure gauge for the train.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.543-554
• /
• 2002

GIS (Geographic Information Systems) need faster access and better visualization. For faster access and better visualization in GIS, map generalization and levels of detail are needed. Existing spatial indexing methods do not support map generalization. Also, a few existing spatial indexing methods supporting map generalization do not support ail map generalization operations. We propose a new index structure, i.e. the LR-tree, supporting ail map generalization operations. This paper presents algorithms for the searching and updating the LR-tree and the results of performance evaluation. Our index structure works better than other spatial indexing methods for map generalization.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.38-46
• /
• 2019

There is a growing interest in engine diagnostic technology for gas turbine engines. An engine simulation program, precisely simulating the engine performance, is required in order to apply it to the engine diagnosis technology for engine health monitoring. In particular, the simulation program can predict not only design point performance but also off-design point and partial load performance in accurate. So the engine simulation program for the 2-spool separate flow type turbofan engine was developed and the JT9D-7R4G engine of PW(Pratt & Whitney) was analyzed. The steady-sate performance analysis is conducted at both design and off-design points in flight path and the differences between analysis results of takeoff and cruise conditions are compared. The effect of Reynold's correction method was analyzed as a scaling method of the engine component performance. The simulation results was compared with NPSS.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.537-541
• /
• 2009

The gas turbine engine performance is greatly relied on its component performance characteristics. Generally, acquisition of component maps is not easy for engine purchasers because it is an expensive intellectual property of gas turbine engine supplier. In the previous work, the maps were inversely generated from engine performance deck data, but this method is limited to obtain the realistic maps due to calculated performance deck data. Therefore this work proposes newly to generate more realistic compressor map from experimental performance test data. And then a realistic compressor map can be generated form those processed data using the proposed extended scaling method at each rotational speed. Evaluation can be made through comparison between performance analysis results using the performance simulation program including the generated compressor map and on-condition monitoring performance data.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.3
• /
• pp.222-232
• /
• 2011

This article examines the scale effect of the flow characteristics, resistance and propulsion performance on a 317k VLCC. The turbulent flows around a ship in both towing and self-propulsion conditions are analyzed by solving the Reynolds-averaged Navier-Stokes equation together with the application of Reynolds stress turbulence model. The computations are carried out in both model- and full-scale. A double-body model is applied for the treatment of free surface. An asymmetric body-force propeller is used. The speed performances including resistance and propulsion factors are obtained from two kinds of methods. One is to analyze the computational results in model scale through the revised ITTC' 78 method. The other is directly to analyze the computational results in full scale. Based on the computational predictions, scale effects of the resistance and the self-propulsion factors including form factor, thrust deduction fraction, effective wake fraction and various efficiencies are investigated. Scale effects of the streamline pattern, hull pressure and local flow characteristics including x-constant sections, propeller and center plane, and transom region are also investigated. This study presents a useful tool to hull-form and propeller designers, and towing-tank experimenters to take the scale effect into consideration.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.3
• /
• pp.231-238
• /
• 2014

In this study, the self-propulsion tests are performed in INHA towing tank. And the effective wake characteristics of the KVLCC2 and the KCS models are compared by the experimental results. The form factor is independent of Reynolds number. To estimate the hydrodynamic performance of a full scale ship, the form factor is determined to consider attendant on Reynolds number. In this research, the power predictions are carried out considering the form factor difference of model and full scale ship. The results of this research could be used as one of the fundamental data to the powering performance prediction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.499-499
• /
• 2023

최근 컴퓨터 성능 향상과 새로운 머신러닝 알고리즘 개발됨에 따라, 각 분야별 연구자들이 이를 활용한 연구를 다양하게 수행하고 있으며, 하수처리시설의 경우에는 막대한 양의 운영자료가 축척됨에 따라 머신러닝을 활용한 다양한 연구가 가속화 되고 있다. 기존 하수처리장의 물리학적 모델은 적용된 영향 인자에 여러 가지 가정이 고려되어 모델 정확도가 부정확해지는 경향이 있었으며, 이러한 문제점을 보완하기 위해 하수처리장의 수집된 운영자료 및 머신러닝 기반의 예측 모델을 활용하여 예측 모델 정확도를 향상하는 선행 연구들이 진행되고 있다. A 하수처리장의 부지 내에 설치된 센서를 통하여 운영자료가 중앙제어실 서버에 실시간으로 저장되는 자료를 활용하여 NN (Neural Network), SVM (Support Vector Machine), RF (Random Forest) 등과 같은 다양한 머신러닝 모델을 적용하였고, 하수처리장 운영자료를 적용할 경우 어느 모델이 가장 높은 성능이 나타나는지 인사이트를 도출하고자 하였다. 금회 연구는 A 하수처리장을 대상으로 여러 머신러닝 기반 예측 모델을 개발하고, 각 모델의 예측정확도를 서로 평가함으로써, 머신러닝 모델 최적화를 수행할 수 있었다. 이번 연구에서 도출된 결과를 활용하여 하수처리장 예측 모델 최적화를 진행할 경우, 향후 비교적 짧은 시간에 하수처리장 머신러닝 기반 예측 모델 개발이 가능하다는 점에 의의가 있다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.597-603
• /
• 2012

It is necessary to accurately evaluate the resistance performance and estimate the towing power of a tugboat for safety towing operation at actual seas. In this study, we have carried out the model tests firstly to investigate the resistance performance and flow characteristics around the tugboat in still water. The experiments are performed in infinite depth in circulation tank using 1/33.75 scaled model from 5kts to 10kts(designed speed 7kts) considering the effect of adverse and favorable current. Then the numerical calculations are executed to analyze the response amplitude operator and added resistance on tugboat due to the waves. The results obtained by the present computation are compared with the those acquired from the experiments in still water. As a result, it is noted that the added resistance become larger at head sea and higher speed conditions. We can also observe that the EHP increase 70 percent in comparison with those in still water.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.13-20
• /
• 1998

A steady-state and dynamic simulation program for a small multi-purpose turboshaft engine with the free power turbine was developed. In order to reduce developing cost, time and risk, a turbojet engine whose performance was well-known was used for the gas generator, and life time was improved by replacing turbine material and by using Larson-Miller curves. The component characteristic of the power turbine was derived from scaling the gas generator turbine. Equilibrium equations of mass flow rate and work were used for the steady-state performance analysis, and the Constant Flow Method(CMF) was used for the dynamic performance simulation. The step fuel scheduling was carried out for acceleration in the dynamic simulation. Through this simulation, it was found that the overshoot of the turbine inlet temperature exceeded over the compressor turbine limit temperature.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.623-631
• /
• 2003

A large scale hydrological laboratory model tests for the geotextile tube were conducted to investigate the stability of geotextile tube and the capability of breakwater with variations of significant wave height, percentage of soil filling, and the water level above geotextile tube. The sliding displacement of geotextile tube is measured to check the stability of geotextile tube for given the various significant wane heights. The marked mash was laid out at the bottom of water channel to measure the displacement of geotextile tube. The bench mark was furnished in the upper part of water channel and the initial location was marked every 10cm interval to measure the displacement of geotextile tube. The wane transmit ratios are analyzed with the variations of soil filling of tube and of the top crown height wave above the geotextile tube in order to study the performance of brekwater before and after the installation of geotextile tube.