• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2011

Recently the increasing of vinyl and green houses and development of reclaimed land including Saemangeum induced the need for breeding salt-tolerant crops which can survive and grow in high salinity soil. So we try to develop salt-tolerant transgenic chrysanthemum (Dendranthema grandiflorum.) lines by using anti-porter gene TANHX and HVNHX. Through marker selection and plant regeneration step, we could get 284 putative transgenic chrysanthemum lines. On selected putative transgenic plants, 40 candidates were used for genetic analysis and 30 lines could be made up of target size band on PCR, so about 75% of marker selected lines were decided as real transgenic lines. Selected 284 transgenic lines were also used for salt-tolerance test as a range of NaCl 0.2 ~ 1.2% (300 mM). As a result of salt-tolerance test, 15 selected transgenic lines could live and grow on the continuous supply of 0.8% (200 mM) NaCl solution and another 7 lines were could survive under 1.2% (300 mM) NaCl solution. This salt-tolerant transgenic lines under salt stress also lead a cell alternation especially a guard cell. A stressed guard cell be swelled and grow larger in proportion to NaCl concentration. TTC test for cell viability on transgenic chrysanthemum lines pointed out that more strong salt-tolerant lines can be live more than another under same salt stress. The numerical value of strong salt-tolerant 7 transgenic lines were 0.206 ~ 0.331 under 1.2% NaCl stress, and then it's value is more larger than middle salinity lines' 0.114 ~ 0.193 and non-transgenic's 0.046. And the proline contents as indicated stress compound also pointed out that HVNHX introduced salt-tolerant transgenic lines were less stressed than other under same salt stress. The contents of strong salt-tolerant transgenic lines were 2.255 ~ 2.638 mg/kg and it is much higher than that of middle salinity lines' 1.496 ~ 2.125.

• Research in Plant Disease
• /
• v.8 no.2
• /
• pp.84-91
• /
• 2002

Disease forecasting in Korea was first studied in the Department of Fundamental Research, in the Central Agricultural Technology Institute in Suwon in 1947, where the dispersal of air-borne conidia of blast and brown spot pathogens in rice was examined. Disease forecasting system in Korea is operated based on information obtained from 200 main forecasting plots scattered around country (rice 150, economic crops 50) and 1,403 supplementary observational plots (rice 1,050, others 353) maintained by Korean government. Total number of target crops and diseases in both forecasting plots amount to 30 crops and 104 diseases. Disease development in the forecasting plots is examined by two extension agents specialized in disease forecasting, working in the national Agricul-tural Technology Service Center(ATSC) founded in each city and prefecture. The data obtained by the extension agents are transferred to a central organization, Rural Development Administration (RDA) through an internet-web system for analysis in a nation-wide forecasting program, and forwarded far the Central Forecasting Council consisted of 12 members from administration, university, research institution, meteorology station, and mass media to discuss present situation of disease development and subsequent progress. The council issues a forecasting information message, as a result of analysis, that is announced in public via mass media to 245 agencies including ATSC, who informs to local administration, the related agencies and farmers for implementation of disease control activity. However, in future successful performance of plant disease forecasting system is thought to be securing of excellent extension agents specialized in disease forecasting, elevation of their forecasting ability through continuous trainings, and furnishing of prominent forecasting equipments. Researches in plant disease forecasting in Korea have been concentrated on rice blast, where much information is available, but are substan-tially limited in other diseases. Most of the forecasting researches failed to achieve the continuity of researches on specialized topic, ignoring steady improvement towards practical use. Since disease forecasting loses its value without practicality, more efforts are needed to improve the practicality of the forecasting method in both spatial and temporal aspects. Since significance of disease forecasting is directly related to economic profit, further fore-casting researches should be planned and propelled in relation to fungicide spray scheduling or decision-making of control activities.

• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.9-17
• /
• 2017

A high degree of precision and accuracy in Gamma Knife Radiosurgery(GKRS) is a fundamental requirement for therapeutical success. Elaborate radiation delivery and dose gradients with the steep fall-off of radiation are clinically applied thus necessitating a dedicated Quality Assurance(QA) program in order to guarantee dosimetric and geometric accuracy and reduce all the risk factors that can occur in GKRS. In this study, as a part of QA we verified the accuracy of single-shot dose profiles used in the algorithm of Gamma Knife Perfexion(PFX) treatment planning system employing Variable Ellipsoid Modeling Technique(VEMT). We evaluated the dose distributions of single-shots in a spherical ABC phantom with diameter 160 mm on Gamma Knife PFX. The single-shots were directed to the center of ABC phantom. Collimating configurations of 4, 8, and 16 mm sizes along x, y, and z axes were studied. Gamma Knife PFX treatment planning system being used in GKRS is called Leksell GammaPlan(LGP) ver 10.1.1. From the verification like this, the accuracy of GKRS will be doubled. Then the clinical application must be finally performed based on precision and accuracy of GKRS. Specifically the width at the 50% isodose level, that is, Full-Width-of-Half-Maximum(FWHM) was verified under such conditions that a patient's head is simulated as a sphere with diameter 160mm. All the data about dose profiles along x, y, and z axes predicted through VEMT were excellently consistent with dose profiles from LGP within specifications(${\leq}1mm$ at 50% isodose level) except for a little difference of FWHM and PENUMBRA(isodose level: 20%~80%) along z axis for 4 mm and 8mm collimating configurations. The maximum discrepancy of FWHM was less than 2.3% at all collimating configurations. The maximum discrepancy of PENUMBRA was given for the 8 mm collimator along z axis. The difference of FWHM and PENUMBRA in the dose distributions obtained with VEMT and LGP is too small to give the clinical significance in GKRS. The results of this study are considered as a reference for medical physicists involved in GKRS in the whole world. Therefore we can work to confirm the validity of dose distributions for all collimating configurations determined through the regular preventative maintenance program using the independent verification method VEMT for the results of LGP and clinically assure the perfect treatment for patients of GKRS. Thus the use of VEMT is expected that it will be a part of QA that can verify and operate the system safely.

• Information Systems Review
• /
• v.18 no.2
• /
• pp.79-106
• /
• 2016

Service innovation is one means of gaining an advantage in a highly competitive environment. Although numerous studies have stressed the importance of service innovation, traditional good-dominant logic is still used in service innovation literature. Furthermore, few studies have been conducted on the link between service innovation and its antecedents in terms of service-oriented approach. To fill the gap, this article theoretically and empirically examines service innovation and its antecedents and consequences. Based on service-dominant logic and resource advantage theory, the current study aims to understand the effect of antecedents on service innovation as well as to identify the effect of service innovation on firm performance (i.e., non-financial and financial performance). Three service innovation activities, namely service creation-focused innovation, service delivery-focused innovation, and customer interaction-focused innovation, and four antecedents of service innovation, including human resource management capability, collaboration capability, marketing capability, and information technology capability, are identified based on Den Hertog (2000)'s service innovation framework. By using the empirical data collected from 189 service firms in Korea, this study explores the causal relationship among antecedents, service innovation and firm performance. Findings indicate that human resource management and marketing capabilities influence the three types of service innovation, whereas collaboration and information technology capabilities have a significant effect on both service creation-focused innovation and service delivery-focused innovation. In particular, human resource management capability is strongly related to customer interaction-focused innovation. The three types of service innovation have a positive influence on non-financial performance, whereas service delivery-focused innovation and customer interaction-focused innovation positively influence financial performance. These results support the crucial effects of antecedents, such as human resource management, collaboration, marketing and information technology capabilities, on service innovation.

• Journal of Chest Surgery
• /
• v.36 no.4
• /
• pp.267-272
• /
• 2003

Background: Common treatment modalities for tracheal stenosis include conservative methods such as repeated balloon dilatation, removal of obstructive material through bronchoscopy and T-tube insertion as well as operative treatment methods. Recent advances in surgical approaches through tracheal resection and end-to-end anastomosis have been reported to give better functional and anatomical results. Material and Method: Between March 1990 and July 2002, 41 patients who received tracheal resection and end-to-end anastomosis at Asan Medical Center, University of Ulsan were studied retrospectively. Result: The causes for tracheal resection and end-to-end anastomosis included 26 cases of postintubation stenosis, 10 cases of primary tracheal tumors (3 benign, 7 malignant), 1 case of endobronchial tuberculosis, 2 cases of traumatic rupture, and 2 cases of tracheal invasion of a thyroid cancer, Of the 41 patients who received tracheal resection and reconstruction, 29 received tracheal resection and end-to-end anastomosis, and 12 received laryngotracheal anastomosis with cricoid or thyroid cartilage resection. Four of these patients received supralaryngeal release. The average length of the resected trachea was $3.6{\pm}1.0$cm. Of the 41 patients who received tracheal resection and end-to-end anastomosis, 30 (73.2%) experienced no postoperative complications, and 8 (19.5%) experienced granulation tissue growth and/or minor infections which improved after conservative management. Good or satisfactory results were therefore achieved in 92.7%. Complications included repeated granulation tissue growth in 7, wound infection in 2, anastomotic site dehiscence in 2, restenosis resulting in dyspnea on exertion in 1, and repeated postoperative aspiration requiring retracheostomy in 1. There was no early postoperative mortality. There were 3 cases of hospital death. Conclusion: In cases of proper length of tracheal lesion, excellent results were obtained after tracheal resection and end-to-end anastomosis. But, granulation tissue growth is so serious complication, it is necessary for continuous study and efforts to prevent it.

• Journal of Chest Surgery
• /
• v.30 no.12
• /
• pp.1197-1204
• /
• 1997

Between April 1981 and June 1996, 65 patients had aortic root replacement at our institution. Disease entities were pure aortic annuloectasia in 31 patients(47.7%), Stanford type A aortic dissection with annuloectasia in 8(43.1%), atherosclerotic aneurysm with aortic regurgitation in 4(6.2%), and paravalvular leakage after aortic valve replacement in 2(3.1 %). 34 patients(52.3%) had the clinical stigmata of the Marfan syndrome. The operative procedures were Bentall operation in 61 patients(93.8%); 3 of conventional procedure and 58 of Cabrol's modification, aortic valve-sparing operation in 2(3.1 %), and root replacement with homograft in 2(3.1%). Hospital deaths occurred in 3 patients(4.8%) because of uncontrolled bleeding(1) and bypass weaning failure due to low cardiac output(2), and all had emergency operation with Cabrol's procedure. Postoperative complications developed in 19(29.2%) patients and most of them were transient. Surviving 62 patients have been followed up to cumulative total 315.0 patient-years(mean 60.2 $\pm$42.4 months). Late deaths occurred in 7 patients(11.3%), aneurysmal changes of remaining aorta were detected in 12 patients(19.4%). Actuarial survival rate at 10 years was 72.0 $\pm$ 9.7%, and the subsequent aortic operation-free rate at 10 years was 68.0$\pm$ 8.9% In a multivariate analysis, Marfan syndrome, emergency operation, preoperative dissection, combined arch replacement, and total circulatory arrest emerged as significant risk factors for hospital death or subsequent aortic operation. Over 60 years of age was the only risk factor for late death. Our 16 years'cummulative experience shows that aortic root replacement, mainly by means of Cabrol's procedure, can be applied successfully to variety of aortic root disease. However, long-term follow up will be needed to determine the late result of aortic valve-saving operation and root replacement with homograft. When dissection is present or the distal native aorta is diseased in'Marfan patients, close follow-up is necessary because of the subsequent aneurysmal change of remaining aorta.

• Journal of Chest Surgery
• /
• v.36 no.8
• /
• pp.595-601
• /
• 2003

Background: It has been known that the most effective treatment method of hyperhidrosis is video-assisted thoracoscopic sympathetic nerve block. Postoperative compensatory hyperhidrosis and anhidrosis are major factors that decrease the postoperative satisfaction. Although sympathetic rami have been selectively blocked to decrease the complications, technical difficulties and excessive bleeding have prevented the universal application. Material and Method: Three pre-fixative cadavers were dissected before clinical application. Bilateral sympathetic chains were exposed in supine position after the whole anterior chest wall was removed. Second and third sympathetic rami were blocked using clips. After the sympathetic chains including ganglia were removed, we evaluated the extents of rami block. Twenty-five patients were subjected to the clinical application. Surgeries were performed in semi-fowlers position under general anesthesia and bilateral ventilation. 2 mm thoracoscopy and 5 mm trocar were intro-duced through third and fourth intercostal space, respectively. Second and third sympathetic rami were blocked using thoracoscopic clips. The postoperative complications, satisfaction, and compensatory hyperhidrosis rate were evaluated retrospectively. Result: Sympathetic rami were completely blocked in cadaver dissection study Hyper-hidrosis symptom was improved in all patients without operative complication. Operative time was shorter than that of traditional ramicotomy. All patients, except four, were satisfied with postoperative palmar hyperhidrosis. Com-pensatory hyperhidrosis was more severely happened in fifteen patients (60%). The remaining six patients had no complaint. Two patients had a minimal degree of gustatory hyperhidrosis. Conclusion: This operative method had shorter operative time and less complication rate, compared with traditional ramicotomy Operative success rate was similar to the traditional syrnpathicotorny; lower extent and occurrence rate of compensatory hyperhidrosis. The thoracic sympathetic rami clipping was suggested as an alternative method for treatment of palmar hyperhidrosis.

• Journal of Chest Surgery
• /
• v.43 no.1
• /
• pp.20-24
• /
• 2010

Background: Fulminant myocarditis is a rare, but life threatening condition. Its prognosis is related with proper management in the acute phase. A cardiopulmonary support device can be very useful in this phase. We report on our experiences with managing acute fulminant myocarditis with a cardiopulmonary support (CPS) device. Material and Method: We reviewed retrospectively 9 patients who had a CPS device used for their fulminant myocarditis between September, 2006 and October, 2008. A Capiox emergency bypass system (Terumo Inc, Tokyo, Japan) was percutaneously inserted in all the patients. Upon implantation, all the patients were in cardiogenic shock because of ventricular arrhythmia or severe left ventricular dysfunction. The mean left ventricular ejection fraction (EF) was $20{\pm}6%$ according to transthoracic echocardiography. Result: 3 patients died despite CPS. The CPS was bridged to a transplanted heart in one patient. The rest were successfully explanted after a mean time of $107{\pm}70$ hours of running. The mean EF after discharge was $56{\pm}7%$ without dilated cardiomyopathy. Conclusion: Fulminant myocarditis can be fatal, but its prognosis is excellent if these patients receive proper, timely treatment. A cardiopulmonary support device can be very useful in this acute period. However, the implantation and management protocol of cardiopulmonary support are not yet settled. Further study is necessary to lower the complications of cardiopulmonary support for patients with fulminant myocarditis.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.359-365
• /
• 2007

In this paper we present a bottom-gate type of zinc oxide (ZnO) and Gallium (Ga) doped zinc oxide (GZO) based thin film transistors (TFTs) through applying a radio frequency (RF) magnetron sputtering method at room temperature. The gate leakage current can be reduced up to several ph by applying $SiO_2$ thermally grown instead of using new gate oxide materials. The root mean square (RMS) values of the ZnO and GZO film surface were measured as 1.07 nm and 1.65 nm, respectively. Also, the transmittances of the ZnO and GZO film were more than 80% and 75%, respectively, and they were changed as their film thickness. The ZnO and GZO film had a wurtzite structure that was arranged well as a (002) orientation. The ZnO TFT had a threshold voltage of 2.5 V, a field effect mobility of $0.027\;cm^2/(V{\cdot}s)$, a on/off ratio of $10^4$, a gate voltage swing of 17 V/decade and it operated in a enhancement mode. In case of the GZO TFT, it operated in a depletion mode with a threshold voltage of -3.4 V, a field effect mobility of $0.023\;cm^2/(V{\cdot}s)$, a on/off ratio of $2{\times}10^4$ and a gate voltage swing of 3.3 V/decade. We successfully demonstrated that the TFTs with the enhancement and depletion mode type can be fabricated by using pure ZnO and 1wt% Ga-doped ZnO.

• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2020

Mycorrhiza refers to the association between a plant and a fungus colonizing the cortical tissue of the plant's roots during periods of active plant growth. The benefits afforded by plants from mycorrhizal symbioses can be characterized either agronomically, based on increased growth and yield, or ecologically, based on improved fitness (i.e., reproductive ability). In either case, the benefit accrues primarily because mycorrhizal fungi form a critical linkage between plant roots and the soil. The soilborne or extramatrical hyphae take up nutrients from the soil solution and transport them to the root. This mycorrhizae-mediated mechanism increases the effective absorptive surface area of the plant. There are seven major types of mycorrhizae along with mycoheterotrophy: endomycorrhizae (arbuscular mycorrhizae, AM), ectomycorrhizae (EM), ectendomycorrhizae, monotropoid, arbutoid, orchid, and ericoid. Endomycorrhizal fungi form arbuscules or highly branched structures within root cortical cells, giving rise to arbuscular mycorrhiza, which may produce extensive extramatrical hyphae and significantly increase phosphorus inflow rates in the plants they colonize. Ectomycorrhizal fungi may produce large quantities of hyphae on the root and in the soil; these hyphae play a role in absorption and translocation of inorganic nutrients and water, and also release nutrients from litter layers by producing enzymes involved in mineralization of organic matters. Over 4,000 fungal species, primarily belonging to Basidiomycotina and to a lesser extent Ascomycotina, are able to form ectomycorrhizae. Many of these fungi produce various mushrooms on the forest floor that are traded at a high price. In this paper, we discuss the benefits, nutrient cycles, and artificial cultivation of mycorrhizae in Korea.