• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.4
• /
• pp.197-209
• /
• 2018

Recently, many start-up failures occur as the number of attempts to start a business increases in a social atmosphere that encourages start-up. In particular, young entrepreneurs have a lower survival rate than general entrepreneurs because young entrepreneurs are challenging just with a simple idea to overcome the difficulties of employment while lacking prior knowledge and experience of business. Therefore, the reason for the failure of start-up is lack of preparation for start-up and lack of entrepreneurship. The purpose of this study is to develop a measurement tool to build a basic framework for entrepreneurship development and start - up preparation activities for young people. To develop an entrepreneurship measurement tool, researchers developed a preliminary question through qualitative research methods such as literature research, focus group interview, and expert verification. After that, researchers surveyed 102 entrepreneurs using quantitative research method and to verify the construct validity of the measurement tool, the final entrepreneurship measurement tool was completed through exploratory factor analysis and confirmatory factor analysis. The entrepreneurship measurement tool developed through this research process consists of 7 components and 15 measurement items. First, in the step of 'confirming entrepreneurial intention', two items of 'self-analytic competence', three items of 'ability of establishing start-up philosophy'are contained. Second, in the step of 'drawing up a start-up model', two items are contained in each category such as, 'ability of eliciting entrepreneurial idea,' 'ability of analyzing idea validity,' 'competence of planning a venture start-up model'. Third, in the step of 'planning the venture start-up,' two items are contained in each category such as, 'business-plan presentation competency,' 'ability of implementing organizational system.'. The measurement tool of entrepreneurship is meaningful as it could help young entrepreneur find out their lacking competence in preparing their start-ups and strengthen necessary competences by measuring their own entrepreneurship. Rather in the entrepreneurship education, basic data that can diagnose the entrepreneurship of young entrepreneurs is provided.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.3
• /
• pp.33-46
• /
• 2020

This study analyzes the entrepreneurship education phenomena for agri-food entrepreneurs whose main business is the production of agricultural products and the sale of processed products, using the qualitative study Strauss & Corbin(1998)'s evidence theory approach. From the entrepreneur's point of view, I would like to summarize the phenomena that appear in education, and to prepare a theoretical basis for explaining the phenomena. The importance of entrepreneurship education is emphasized to cultivate the ability to develop and provide products tailored to customers. The necessity of education leads to an increase in demand according to the situational awareness of the founders, and the quantitative increase in entrepreneurship education in the agri-food sector is a clear trend. Inevitably, the need for various discussions on systematic and effective entrepreneurship education is raised. For the study, an interview was conducted with preliminary or entrepreneur who have experienced entrepreneurship education in the agri-food sector. As a research method, I use Strauss & Corbin(1998)'s approach and analyze qualitative data using QSR's NVIVO 12 program. Through this study, it was found that contextual and systematic entrepreneurship education in the agri-food sector has the effect of strengthening competitiveness and strengthening sales. There is a need for follow-up management of trainees. Strengthening the competitiveness of start-ups is based on training professional manpower through education and linking regions with cities. Strengthening sales is based on product planning and market development. This study explores entrepreneurship education in the agri-food sector, which has not been actively conducted in the past. Exploratory analysis on the experiences of the founders of agri-food sector as education demanders has an important meaning for understanding the phenomenon of start-up education.

• Progress in Medical Physics
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2001

Synchrotron radiation (SR) has several advantages over convetional x-rays, including its phase, collimation, and high flux. A synchrotron radiation beamline 5C1 at Pohang Light Source (PLS) was recently built for imaging applications. We have shown that a SR imaging system is useful in imaging microscopic structures. SR with broad-band energy spectrum were adjusted to an object by Si wafers and their energy were approximately ranging from 6 keV to 30 keV. SR were passed through an object and finally transformed into visible lights by CdWO$_4$ scintillator screen. The visible lights which were reflected at an angle of 90 degrees by gold plated mirror were detected by a CCD camera and the image data were acquired using image acquisition system. A high-resolution phantom, capacitor, adult tooth, child tooth, cancerous breast tissue, and mouse lumbar vertebra were imaged with SR imaging system. The Objects were rotated within the field of view of the CCD detector, and their projection image data were obtained at 250 steps over 180 degrees rotation. Image reconstructions were carried out in a PC by using IDLTM(Research systems, Inc., US) program. The spatial resolution of the images acquired by the SR imaging system was measured with a high-resolution chart manufactured for several micrometer resolution. The specimens were also imaged with conventional x-ray radiography system to compare the image quality of radiography obtained with the SR imaging system. The results showed more structural details and high contrast images with SR imaging system than conventional x-ray radiography system. The SR imaging system may have a potential for imaging in biological researches, material applications, and clinical radiography.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.75-82
• /
• 2011

Five different composition UV-cured poly(urethane acrylate-co-acrylic acid) (PU-co-AA) films have been prepared by reacting isophorone diisocyanate(IPDI), polycaprolactone triol(PCLT), 2-hydroxyethyl acrylate(HEA), and different weight ratio trimethylolpropane triacrylate(TMPTA) and acrylic acid(AA) as diluents, and characterized using a Fourier transform infrared spectroscopy(FT-IR). The adhesion properties onto the stainless steel, morphology, mechanical hardness, and electrical property of UV-cured PU-co-AA films were investigated as a function of acrylic acid(AA) content. All the PU-co-AA films are structure-less and the molecular ordering and packing density decreased with increasing content of AA due to the flexible structure and -COOH side chains in AA. The crosscut test showed that PU-co-AA films without AA and with low content of AA showed 0% adhesion(0B) and the adhesion of PU-co-AA films in the range of 40-50% AA increased dramatically as the content of AA increases. The pull-off measurements showed that the adhesion force of PU-co-AA films to stainless steel substrate varied from 6 to 31 kgf /$cm^2$ and increased linearly with increasing AA content. The mechanical hardness also decreased as the content of AA increases. This may come from relatively linear and flexible structure in AA and low crystallinity in PU-co-AA films with higher content of AA. The higher AA-containing PU-co-AA films showed higher dielectric constant due to the increase of polarization by introducing AA monomer. In conclusion, the physical properties of UV-cured PU-co-AA films are strongly dependent upon the content of AA and the incorporation of AA in polyurethane acrylate is very useful way to increase the adhesion strength of UV-curable polymers on the stainless steel substrate.

• Clinical and Experimental Pediatrics
• /
• v.48 no.2
• /
• pp.158-164
• /
• 2005

Purpose : We reviewed the therapeutic results of various Duct-Occlud coils(pfm AG, $K{\ddot{o}}ln$, Germany) to evaluate the efficacy of the most-recently modified Duct-Occlud coil(Nit-Occlud) in the transcatheter closure of patent ductus arteriosus(PDA), including large defects more than 4 mm in diameter. Methods : Two hundred and five patients who underwent percutaneous PDA occlusion using Duct-Occlud devices from March 1996 to December 2003 were enrolled and four types of Duct-Occlud [Standard(S), Reinforced(R), Reinforced reverse cone(RR) and Nit-Occlud(N)] were used in this study. The patients were followed up by echocardiogram and physical examination before discharge, one month, six months and 12 months after the procedure. Results : The rate of residual shunt according to the type of Duct-Occlud were as follows : S-54%, R-72%, RR-50%, N-14%(P<0.05 compared with other devices) at one month, S-25%, R-44%, RR-37%, N-0%(P<0.05 compared with other devices) at six months, S-8%, R-8%, RR-4%, N-0%(P<0.05 compared with S and R) at 12 months and later. Nit-Occlud coil showed the complete occlusion of PDA after six months of follow-up, even in 12 patients with relatively large PDA(>4 mm). Conclusion : The transcatheter closure of PDA using Duct-Occlud was an effective treatment and our study revealed that a Nit-Occlud coil which showed higher rate of occlusion even in PDA with large diameters over than 4 mm, was a more effective modality compared to previous devices.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.31-42
• /
• 2014

Purpose: The present study was conducted to investigate the effect of the physical properties of RGP lens induced by lens polishing on the actual wearer's subjective comfort, the tear film break-up time and the blinking rate as a follow-up study that revealed the relationship between the lens physical properties during lens manufacturing and lens wearer's factors. Methods: RGP lenses made from the three different polishing conditions (25, 50 and 100 seconds) were applied on 28 eyes of 17 subjects, aged 20 to 29 years, without any known disease and surgical history in the eyes. While the subjects were asked to wear the RGP lenses longer than a week, the questionnaire for the comfortability was administered everyday. Subjective and objective tear break-up time and blinking rate of the wearers were further measured. Results: The wearer's subjective comfortability showed some difference in the type of discomfort and satisfaction score according to the polishing status when wearing RGP lenses made from different polishing conditions longer than a week, and a bigger difference in satisfaction score induced by polishing condition was especially shown in experienced RGP lens wearer rather than un-experienced wearer. In the case of RGP lens wearer compared with the ones without the wearing experience, as the wearing time increased subjective and objective tear break-up time were increased and the blinking rate was decreased. However, subjective and objective tear break-up time were tended to decrease with even longer wearing time when wearing the RGP lens made from the polishment for 100 seconds. Conclusions: These results confirmed that the optimization of physical properties of the lens may not give the same effect on the wearer's subjective and objective symptoms and other factors when actual wearing. From the results, it can suggest that the success rate of RGP lens wear may be changed by physiological factors such as the stabilization of wearer's tear film, comfortability and lens wearing experience when wearing RGP lens based on 'The manufacturing standard for soft contact lens/hard contact lens' provided by Korea Food and Drug Administration.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.

• Korean Journal of Psychosomatic Medicine
• /
• v.11 no.2
• /
• pp.182-195
• /
• 2003

Background: Marriage is one of the major life events and the primary source of individual happiness and meaning of life. It is not possible to predict who will marry whom and which marriage will be successful. Marital adjustment has significant influences on an individual and relationship functioning and is associated with mental health. Good marital quality may imply good general relationship. There are several factors that correlate with or predict good marital quality. Especially individual personality factors may be a major factor in achieving and maintaining marital stability, satisfaction and happiness. The aim of the present study was to investigate the possible relationship between dyadic adjustment and personality dimensions in urban married women. Methods: Dyadic Adjustment Scale, Eysenck's Personality Questionnaire, Beck Depression Inventory and State-Trait Anxiety Inventory were administered to 215 married women. Data analysis was based on 170 women who provided reliable informations. The descriptive statistics of demographic data and 4 scales were obtained. Then the possible relationships between each data were tested by calculating Pearson's product moment correlations. To test the effects of depression and anxiety on dyadic adjustment, stepwise multiple regression analysis was done. Results: Age and length of marriage were negatively correlated with affectional expression and dyadic cohesion. Educational level was positively correlated with total dyadic adjustment score and dyadic satisfaction. Family income was positively correlated with total dyadic adjustment score, dyadic consensus, dyadic satisfaction and dyadic cohesion. Different family type showed different total dyadic adjustment score, dyadic satisfaction and dyadic cohesion. Psychoticism was negatively correlated with total dyadic adjustment score, dyadic consensus, dyadic satisfaction, affectional expression and dyadic cohesion. Neuroticism was negatively correlated with total dyadic adjustment score, dyadic consensus, dyadic satisfaction and affectional expression. Extraversion and lie were not correlated with any factors. Beck Depression Inventory and State-Trait Anxiety Inventory scores were negatively correlated with total dyadic adjustment score, dyadic consensus, dyadic satisfaction, affectional expression and dyadic cohesion. The result of multiple regression analysis indicated that psychoticism was correlated with dyadic adjustment. Conclusion: These results showed that the demographic factors such as age, length of marriage, educational level, family income and family type were significantly correlated with dyadic adjustment. Psychoticism and neuroticism measured by Eysenck Personality Inventory were significantly correlated with dyadic adjustment. But the correlations with extraversion and lie were not significant. Especially correlation between neuroticism and dyadic adjustment seemed to be mediated by emotional state such as depression and anxiety. These findings suggest that personality factors may be involved in marital relationship and that clinician must consider personality aspect in dealing with marital problems. Future study about differences between control group and psychiatric patient group will be needed.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.155-174
• /
• 2010

In many cases, street vendors are means of living and/or a solution to unemployment for low income group. Street vendors have both of positive and negative effects on traditional market revitalization. This two-sided perspective of the vendors has produced different views of interests groups. In this study, the features of street vendors are examined to present related issues, and a survey result conducted on interests groups is presented to offer effective management measures. As traditional management about street vendors are focused on crackdown, relationship between street traders and government has been not very much mutually cooperative, and at times some traders organized groups who are against government policies. With the premise admitting street vendors as one element of distribution network, it is possible to access the management measures for street vendors in organizational, quantitative or qualitative perspectives. However, I believe it is not recommendable to enforce multi-perspective approach at a time. It is because street traders still have quite strong animosity against government policies. Therefore, serious misunderstanding and side-effects on our society could be brought if the government makes hasty and forcible attempts to legalize street vendors. In political position, overreaching actions of government could hardly produce positive results because policy making and its enforcement need each of timeliness. In a similar way, government's policies for street vendors need to come into effect gradually. Management measures for street vendors can come in short-, mid- and long-term. In short-term, government should try to reduce animosity of street traders along with minimizing institutional and political pressure on them. As a mid-term solution, plans to bring vendors over to institutional boundaries by improving them are required. Last but not least, in the long term, government should design policies which are to help street vendors settle down and maintain successfully in the boundaries. Besides, policies related to street vendors need to come in effect in a way that closely connected to interests groups and businesses because those policies would get involve many interests groups and businesses in diverse perspectives.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.77-84
• /
• 2011

This study was conducted to develop a novel combined system of a hybrid rotating biological contactor (RBC) process that was composed of an attached- and suspended- biomass reactor, followed by a settler and a biological aerated filter (BAF) column to treat a high strength slaughter wastewater. Long term influences of organic and nitrogen loading rates were investigated to see how the combined system worked in terms of the removal efficiency. A synthetic wastewater containing a pork cutlet steak source (commercially available) and swine blood was used to feed the combined system. The hybrid RBC process showed excellent removals: about 95% for soluble COD and 85% for ammonium nitrogen. However, the unsettled solids seriously deteriorated the removal efficiency of total COD (TCOD) and total nitrogen (TN) in the RBC process. A significant fraction of the TCOD and suspended solids (SS) was further removed in the BAF column although the effluent quality was still unsatisfactory, giving TCOD 300 mg/L, SS 180 mg/L and TN 59 mg/L. An addition of polyaluminium chloride into the RBC effluent improved the performance of the settler and BAF, producing an excellent quality of final effluent; TCOD 16.5 mg/L, SS 0 mg/L, TN 55.5 mg/L, TP 1.3 mg/L. Therefore, it was confirmed that the combined system of hybrid RBC and BAF could treat a high strength slaughter wastewater excellently.