• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.204-205
• /
• 2017

In this study, flowability and strength on ultra high performance concrete(UHPC) pre-mixed binders with fiber was investigated. The flow of UHPC with pre-mixed binders was higher than that of seperate mixing conditions. The UHPC using PVA fiber with high specific surface area showed a low flow compared to steel fiber. An pre-mixing method led to improved strength of UHPC and low deviation of specimens due to dispersion effect of each materials.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.76-76
• /
• 1992

본 연구의 목적은 국내 섬유산업에서 문제시되는 염색폐수처리에 막분리공정의 적용가능성과 문제점을 실험실규모와 pilot 규모의 실험을 통하여 규명하는 것이다. 염색폐수는 섬유의 가공공정에 따라 염료, 분산제, 정염제, 반응제 등 다양한 유기물질과 무기염을 함유하며 온도가 10-90$\circ$C로 높은 것이 특징이다. 본 연구에서는 2종류의 Nanofiltration: NF40, XU45; 두종류의 복합막; BW30, SW30HR; 2종류의 Cellulose Acetate 비대칭막의 평막 Sample을 사용하여 합성염색폐수의 배제율과 압력변화에 따른 투과수에 미치는 영향을 조사하였다. 실제 혼합염색폐수의 처리는 2개의 2.5"$\times$ 40" Nanofiltration 모듈을 장착한 Pilot 장치를 염색단지 종합처리장에 설치하여 3개월에 걸쳐 시행하였다. 현재까지 얻어진 실험결과에 의하면 전처리공정의 효율롸를 통해 부유물질에 의한 Fouling을 최소화하고 폐수의 성분분석과 사용된 막의 표면분석을 통한 체계적인 조사가 필요하다. 염색폐수처리에 막분리공정이 기존처리방법과 비교하여 경제성을 가지려면 효율적인 막세척방법을 개발하여 투과율의 감소를 최소화시켜야 한다.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.93-99
• /
• 2012

The mechanical properties of nano composites were evaluated for structural performance in order to enhance their applicability to the car and machine industrial fields. Carbon fiber reinforced plastics (CFRP) and GFRP were manufactured by vacuum-assisted resin transfer molding (VARTM) process with good mechanical properties. Tensile test was conducted to obtain the process factor of each composite. Also, carbon nano fiber (CNF) was dispersed in the composites and the relationship between the mechanical property and the CNF fraction was compared. The tensile strength and stiffness of 0/90 laminated CFRP were the best. CFRP/CNF (0.5 wt.%) was confirmed to be an excellent material for its elasticity and tensile strength.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.186-186
• /
• 2016

수소는 연료전지 등의 에너지원으로 사용될 경우 NOx, SOx, $CO_2$ 등의 한경오염물질, 온실가스를 발생시키지 않기 때문에 친환경 에너지원으로 각광을 받고 있다. 수전해는 수소를 생산하는 가장 간단하고 효율적인 방법 중의 하나로서, 잉여전력 또는 신재생에너지에 의한 전기에너지를 통해 환경오염물질 발생 없이 고순도의 수소를 얻을 수 있으며 분산/대량 생산이 용이하다. 수전해에서 환원전극에서는 수소발생반응이 일어나고, 산화전극에서는 산소발생반응이 일어난다. 이때 주로 산소발생전극 촉매로는 과전압이 작게 걸리고 활성이 우수한 귀금속 계열의 $IrO_2$와 $RuO_2$ 등의 촉매가 현재 사용되고 있다. 본 연구에서는 고분자 용액을 만들어 전기방사를 이용하여 공정변수에 따른 직경과 morphology를 확인하였고, 고가의 귀금속 산화물 대신 저렴한 전이금속산화물인 Cu와 Co를 이용하여 1D 나노섬유를 산소발생 촉매로 합성하였다. 합성된 나노섬유의 구조적, 물리화학적 특성을 분석하고 산소발생반응(OER)에 대한 전기화학적 활성 및 내구성을 평가하였다.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.361-365
• /
• 2005

Cement-reinforcing carbon fibers were surface-modified with $O_2$, $H_2O$, acrylic acid, diaminocyclohexane plasmas and their effects were investigated. Hydrophobic surfaces with water contact angles of $75{\sim}80^{\circ}$ were changed to hydrophilic surfaces. The water contact angles were reduced down to lower than $10^{\circ}$. As a result, the fiber's hygroscopic property and dispersion in water were improved. Also, Zeta potential of the fiber in water was changed from a negative value to positive values. As a result, adhesion with cement that had a negative Zeta potential was improved up to 57~124% through increased electrostatic interaction.

• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.63-70
• /
• 2014

This experimental study was intended to improve the compressive strength of multi-walled CNT reinforced cementitious composites with efficiency. The variables considered are the degree of sonication, the amount of surfactant, the replacement ratio of silica fume, etc. Optical microscope informed that fiber dispersion of CNT was improved with the increase of sonication time, and the compressive strength was proved to be enhanced as the degree of sonication increased. When superplasticizer as a surfactant had SP/CNT ratio of 4~6, the best improvement in strength was obtained. Silica fume was shown to produce the highest compressive strength at 10% replacement. Microstructure of CNT composites was also analyzed; XRD and SEM results indicated that CNT addition hardly changed hydration products and microstructure, and MIP analysis found the reduction of total porosity as well as the increase of nano-pores with the size of tens of nm instead of the decrease of pore distribution in the region of around 10 ${\mu}m$ and 100 nm. The results of microstructure analysis explains that the strength improvement is closely related to physical contribution rather than chemical influence by adding CNT.

• Clean Technology
• /
• v.17 no.2
• /
• pp.110-116
• /
• 2011

The dyeing of polyester fiber with two different disperse dyes (Disperse Red 60 and Disperse Yellow 54) was carried out using supercritical carbon dioxide ($SCCO_2$) as a dyeing medium at temperatures ranging from $50^{\circ}C$ to $90^{\circ}C$ and at pressures from 15 MPa to 30 MPa. The dye uptake of Disperse Red 60 on polyester fiber was found to increase with temperature at constant pressure and $SCCO_2$ density (700 kg/$m^3$). At $90^{\circ}C$ and 30 MPa, the dye uptake on polyester fiber increased with dyeing time and the saturation concentration of Red 60 was attained within 240 min, while a longer dyeing time was required for Yellow 54 to reach its saturation concentration. When dyestuff mixtures with mixing ratios of 0.01 to 9.0 (Red 60/Yellow 54) were used, the uptake ratio of the two dyes was found to be proportional to 0.26 power of their mixing ratio. Dyed fibers showed an orange color and the depth of the color depended upon the mixing ratio of the dyestuffs.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.411-422
• /
• 2010

Self-sensing on micro-failure, dispersion degree and relating properties, of carbon nanotube(CNT)/epoxy composites, were investigated using wettability, electro-micromechanical technique with acoustic emission(AE). Specimens were prepared from neat epoxy as well as composites with untreated and acid-treated CNT. Degree of dispersion was evaluated comparatively by measuring volumetric electrical resistivity and its standard deviation. Apparent modulus containing the stress transfer was higher for acid-treated CNT composite than for the untreated case. Applied cyclic loading responded well for a single carbon fiber/CNT-epoxy composite by the change in contact resistivity. The interfacial shear strength between a single carbon fiber and CNT-epoxy, determined in a fiber pullout test, was lower than that between a single carbon fiber and neat epoxy. Regarding on micro-damage sensing using electrical resistivity measurement with AE, the stepwise increment in electrical resistivity was observed for a single carbon fiber/CNT -epoxy composite. On the other hand, electrical resistivity increased infinitely right after the first carbon fiber breaks for a single carbon fiber/neat epoxy composite. The occurrence of AE events of added CNT composites was much higher than the neat epoxy case, due to micro failure at the interfaces by added CNTs.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.153-161
• /
• 2007

This paper investigates the lap splice performance of structural steel bars embedded in high performance fiber reinforced cementitious composite(HPFRCC) with various matrix ductilities. Matrix ductility is governed fiber type and fiber volume fraction. Fiber types were polypropylene(PP), polyethylene(PE) and hybrid fiber[polyethylene fiber+steel cord(PE+SC)]. The lap splice length$(l_d)$ was calculated according to the relevant ACI code requirements for reinforcing bars in normal concrete. As the result of tests, lap splice strength of HPFRCC using PE1.5 and hybrid fiber increased by up to $82{\sim}91$ percent more than that of concrete. Splice strength and energy absorption capacity of PE0.75+SC0.75 or PE1.5(fiber volume fraction 1.5%) specimen increased more than that of PP2.0(fiber volume fraction 2.0%) specimen. Therefore lap splice performance depends on fiber tensile strength and Young's modulus more than fiber volume fraction. Also, HPFRCC appear multiple crack and ductile postpeak behavior due to bridging of fiber in cementitious composite.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.188-195
• /
• 2014

This paper was evaluated the rheology properties according to each step of paste, mortar and HPFRCC as a part of the basic study to development of sprayed high performance fiber reinforced cementitious composites(HPFRCC) for protection and blast resistant. Rheology test results in step of paste, in case of GGBFs and FA, it showed that the plastic viscosity and yield stress reduced gradually according to the increase of mixing rate, and in case of SF, the plastic viscosity and yield stress increased radically starting from the mixing rate of 10%. Rheology test results in step of mortar, type of aggregates, it showed that particle shape and grading of aggregate is influence on plastic viscosity and yield stress, and change of volume ratio is influence on plastic viscosity than yield stress. Fluidity and rheology test results in step of HPFRCC, if after a fiber mixed, it showed that viscosity agent is more effective to improve the fluidity and fiber dispersion than superplasticizer.