Interaction between pain and sleep has long been proved through many researches, and various studies are being conducted to identify its mechanism. However, these studies have targeted on patients with systemic disease, such as rheumatic disease and fibromyalgia. There are few researches on patients with orofacial pain including temporomandibular disorder(TMD). In this study, we studied interaction between pain aspect and sleep quality in 229 patients with TMD, who visited the TMJ and Orofacial pain clinic. Pittsburgh Sleep Quality Index(PSQI), Epworth sleepiness scale(ESS) questionnaire were surveyed and sleep-screening device was operated. PSQI showed that sleep quality in TMD patients with pain was poorer than that in TMD patients without pain. The ratio of poor sleeper was higher in TMD patients with pain. Especially, TMD patients with chronic pain showed obviously poorer sleep quality than TMD patients with acute pain. The result of ESS showed that patients with painful TMD showed more daytime sleepiness than painless TMD patients. The ratio of TMD patients with chronic pain who had daytime sleepiness was higher than TMD patients with acute pain, and the amount of daytime sleepiness was higher in the group of chronic pain. In TMD patients with chronic pain, only the poor sleeper(PSQI>5) presented mean ESS>10(diagnostic criteria of daytime sleepiness). There was no correlation between pain intensity and sleep quality or daytime sleepiness. The result of ApnealinkTM for screening of sleep related breathing disorder showed that only 1 patient presented AHI>5 among 19 participants. TMD patients with chronic pain presented poor sleep quality and excessive daytime sleepiness similar to other chronic pain patients. Evaluation of sleep state by questionnaire might be useful for diagnosis and management of TMD, because sleep disturbance decreases pain threshold and pain disturbs sleep. In addition, sleep-screening device would be useful for screening sleep related breathing disorder in dental clinic.
Journal of the Society of Cosmetic Scientists of Korea
/
v.38
no.3
/
pp.219-224
/
2012
European Union prohibited the marketing of cosmetic products containing constituents that have been examined through animal experiments. Thus, non-animal test models are needed to replace animal experiments. The reconstructed skin models are important as a test system for cosmetic, pharmaceutical, and medical device safety testing. In the present study, we tried to develop an optimal skin equivalent model containing basement membrane and epidermis. For this purpose, we used mesenchymal stem cells (MSCs) and/or preadipocytes as well as fibroblasts as the dermal matrix cells. The formation of basement membrane and epidermis was verified by immunohistochemical stains. Among various models, the epidermis was thickest when MSCs were used in the dermal matrix. Furthermore, PCNA and involucrin distribution showed that dermal matrix with MSCs resembled human skin. Therefore, skin equivalents with MSCs could be developed as a non-animal test model to replace animal experiments.
Journal of the Korean Society of Clothing and Textiles
/
v.33
no.6
/
pp.893-903
/
2009
Smart clothing represents the future of both the textile/clothing industry and electronic industry and has an effort to make electronic devices a genuine part of our daily life. The researches about technologies innovation and application of smart clothing can be found in previous studies. But consumer researches about perception or attitude toward smart clothing can be hardly found. Therefore, we proposed a conceptual framework that explores the impact of perceived risks on perceived attributes to adopt smart clothing. In addition, we compared differences of this framework among three counties. Korea, U.S. and Spain. Based on the literature review and hypotheses development, a research model was constructed. After data analysis using Amos 7.0, the results can be concluded as following: First, the influences of psychological risk among Korea, U.S. and Spain are same. Psychological risk has negative effect on relative advantage and complexity, but has positive effect on trialability. Second, loss risk was found to have nothing to do with relative advantage. But it negatively influences complexity for Korean consumers and positively influences trialability for both Korean and American consumers. Third, the influences of performance risk for different consumers are different. At last, based on our discussion, some implications were also concluded.
The analysis and experimental program of reinforced concrete (RC) structures for resistance against such extreme loads as earthquake, blast, and impact have been carried by many researchers and designers. Under the extreme loads, a large amount of energy is suddenly exerted to the structure, hence if the structure fails to absorb the impact energy, catastrophic collapse may occur. To prevent catastrophic collapse of structures, reinforced concrete must have adeguate toughness or it needs to be strengthened. The FRP strengthening method and SFRC are studied widely in resistance of impact load because of their high energy absorption capacity. In this study, drop weight impact tests were implemented to evaluate the impact resistance of SFRC and FRP strengthened RC beam while the total steel fiber volume fractions was fixed at 0.75% carbon FRP flexural strengthened RC beams. Futhermore, to prevent the shear-plug cracks when the impact load strikes the beams, additional FRP shear strengthening method are applied. The experimental, results showed that the FRP strengthened RC SFRC beams has high resistance of shear-plug cracks and crack width and SFRC has high resistance of concrete spalling failure compared to normal RC beams. The FRP flexural and shear strengthening RC beams has weakness in the spalling failure because the impact load concentrated the concrete face which is not strengthened with FRP sheets.
This study was undertaken to investigate the cytotoxicity of orthodontic wires after doing various treatments to the wires. 018x025 inch Stainless steel(A) and Co-Cr(B) wires were used and each of them were divided into 4 groups. A-1 and B-1 groups were as received state, and A-2 and B-2 groups were heat treated. A-3 and B-3 groups were electropolished after heat treatment, and A-4 and B-4 groups were soldered with Ag-solder. Each group had 3 wires and these were sterilized with Ethylene Oxide gas. We used human gingival fibroblast cell culture and agar overlay technique to investigate the cytotoxicity of each group of wires. The cytotoxicity of wire was assessed using reaction index (zone index/lysis index). The findings of this study were as follows. 1. Both of the stainless steel wire and Co-Cr wire showed no cytotoxicity in as received state. 2. Heat treatment or electropolishing of the wires had no effect on the cytotoxicity of the wires 3. Soldered stainless steel wires showed a little wider zone of discoloration than soldered Co-Cr wires, but the zone index and cytotoxicity(reaction index) was not different. 4. Soldered wires showed moderate cytotoxicity in both of the wires.
Jo, Gwang-Min;Jeong, Yeon-Hu;Lee, Jun-Hyeong;Kim, Jeong-Ju;Heo, Yeong-U
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.345-345
/
2014
최근 디스플레이 기술은 급속도로 발전해 가고 있다. 정보화 기술의 발전으로 언제 어디서나 쉽게 정보를 얻을 수 있는 유비쿼터스 시대로 접근하고 있으며, 휴대가 간편하고 이동성을 가진 휴대용 기기가 인기를 끌고 있다. 이에 따라 더 얇고 더 가벼우며 휴대하기 쉬운 디스플레이가 요구 되고 있고, 더 나아가 떨어뜨려도 깨지지 않고 유연하며, 디자인 변형이 자유로우며, 때론 종이처럼 접거나 휘어지거나 두루마리처럼 말을 수 있는 이른바 "플렉서블 디스플레이"에 대한 필요성이 점점 대두되고 있다. 이러한 첨단 디스플레이의 핵심 소자 중 하나는 산화물 박막 트랜지스터 이다. 산화물 반도체는 넓은 밴드갭을 가지고 가시광선 영역에서 투명하며, 높은 이동도를 가지고 있어 차세대 평판디스플레이, 투명디스플레이 및 플렉서블 디스플레이용 박막트랜지스터(TFT)를 위한 채널층으로써 광범위하게 연구되고 있다. 하지만 현재 대부분의 산화물 박막 트랜지스터 제조 공정은 고온에서의 열처리를 필요로 한다. 고온에서의 열처리 공정은 산화물 박막의 제조 공정 단가를 증가시키는 문제점이 있으며, 산화물 박막이 형성되는 기판의 녹는점이 낮은 경우에는 상기 기판의 변형을 가져오므로(예를 들면, 플라스틱 기판, 섬유 기재 등), 상기 산화물 박막이 적용되는 기판의 종류에 제한이 생기는 문제점이 있었다. 이에 플렉시블 디스플레이 등을 위해서는 저온공정이 필수로 선행 되어야 한다. 산화물 TFT는 당초, ZnO계의 재료가 연구되었지만 2004년 말에 Hosono 그룹이 Nature지에 "IGZO (In, Ga, Zn, O)"을 사용한 TFT를 보고한 이후 IGZO, IZO, ISZO, IYZO, HIZO와 같은 투명 산화물반도체가 TFT의 채널물질로써 많이 거론되고 있다. 그 중에서 인듐갈륨 산화물(IGO)는 삼성분계 n-형 산화물 반도체이고, 채널 이동성이 좋고 광투과도가 우수해 투명 TFT에 매우 유용하게 사용할 수 있다. 이 실험에서 우리는 인듐갈륨 산화물 박막 및 트랜지스터 특성 연구를 진행하였다. 인듐갈륨 산화물 박막은 상온에서 rf-magnetron sputtering법을 사용하여 산소분압 1~10%에서 증착 되었다. 증착된 인듐갈륨 산화물 박막은 cubic $In_2O_3$ 다결정으로 나타났으며, 2차상은 관찰 되지 않았다. 산소분압이 10%에서 1%로 변함에 따라 박막의 전도도는 $2.65{\times}10^{-6}S/cm$에서 5.38S/cm 범위에서 조절되었으며, 이를 바탕으로 인듐갈륨 박막을 active층으로 사용하는 bottom gate 구조의 박막트랜지스터를 제작 하였다. 인듐갈륨산화물 박막트랜지스터는 산소분압 10%에서 on/off 비 ${\sim}10^8$, field-effect mobility $24cm^2/V{\cdot}S$를 나타내며 상온에서 플렉서블용 고 이동도 소자 제작의 가능성을 보여준다.
Lee, Byung Min;Kim, Ji-Hyun;Kim, Sung Soo;Lim, Jong Choo
Applied Chemistry for Engineering
/
v.23
no.5
/
pp.433-439
/
2012
In this study, a cationic surfactant BHMAS (N,N-bis-(3'-n-dodecyloxy-2'-hydroxypropyl)-N-methyl-2-hydroxyethylammonium methyl sulfate) having two lauryl and three hydroxyl groups was synthesized by the reaction of n-dodecyl glycidyl ether and 2-aminoethanol followed by the quarternization with dimethyl sulfate. The structure of the product was elucidated by $^{1}H-NMR$ and FT-IR. The CMC (critical micelle concentration) and surface tension of BHMAS at CMC condition were found to be $9.12\;{\times}\;10^{-4}$ mol/L and 28.71 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer indicated that a relatively long time was required to saturate the interface between air and aqueous surfactant solution. The interfacial tension measured between 1 wt% surfactant solution and n-decane reached an equilibrium value of 0.045 mN/m in 5 min. The adsorption capacity of the synthesized surfactant was observed to be excellent, which suggests that the surfactant can be used as a softening agent during a laundry process.
Exposure measurement of agricultural worker to pesticide is one of important part of health risk assessment of pesticide. Therefore exposure matrices, apparatus, instruments and methods must be validated in advance to field experiment. In this study, method validation with an organophosphorus insecticide fenthion was carried out for exposure monitoring of agricultural worker. LOD and LOQ were 0.01 and 0.05 ng, respectively. Calibration curve linearity ($R^2$ > 0.999) and reproducibility (C.V. < 3%) were also excellent. Recovery at LOQ, 10LOQ and 100LOQ levels from gloves, socks, mask, patch, solid sorbent, glass fiber filter was 76~113% (C.V. < 3%). Trapping efficiency was 95~105% while no breakthrough was observed. Method validation for the exposure monitoring was established successfully through several experiments. Such method validation can be usually performed in laboratory and not much different for each pesticide so that, this techniques will be applied widely in research for pesticide exposure monitoring by combination with body surface area and respiration rates.
As a regional development gap between Southwest and Southeast of Jeonnam Province are becoming more serious, it is highly time to come up with measures for the balanced development of the two areas. This paper suggests construction of the Airport and Port Supporting Complex in apparent efforts to reduce the gap between the two areas and facilitate the Southwest economy. The Supporting Complex aims to constitute a triangle industrial cluster which is classified into the following three categories; 1. Traditional competitive industries 2. New growth engine industries 3. Attraction of companies u-turning from abroad such as China etc. To provide one-stop service through set-up of R&D Business Center is the heart of this triangle core. This paper had LQ and Shift&Share Analysis in an attempt to search for competitive industries among the traditional industries in Mokpo-si(city) and Muan-gun(county) of Jeonnam Province. As a result of the analysis, metal manufacturing industry and metal-working process products industry have been found competitive in the two areas. Among the new growth engine industries, this paper suggests precision instruments industry and advanced parts industry for utmost strengths of airport and port while u-turning industries from abroad include higher value-added textile industry and fashion industry. It is expected that all of above-mentioned industries for the triangle industrial cluster will contribute to laying the groundwork to develop regional economy further and create more jobs in the Southwest area of Jeonnam Province.
In this study, development of the pine needle flavor oils and their application to foods, especially to traditional Korean foods, were investigated. The pine needle flavor oils were prepared by the autoclaving method, and their volatile flavor components(VFCs) were determined by capillary gas chromatographic method The major flavor components of the pine noddle flavor oil were a -pinene 31.1%, pentane 9.8%, tricyclene 7.5%, camphene 6.8%, hexanal 6.2%, propane 6.0%, ${\beta}$-pinene 5.6%, limonene 3.9%. The acceptability of the pine needle flavor oils, sensory evaluation including a preference test and quantitative descriptive analysis(QDA), of the pine needle flavor oil, a sesame oil, and a blended oil (pine needle flavor oil : sesame oil 50 : 50 v/v) was carried out. The blended oil and sesame oil showed much higher preference scores than the pine needle flavor oil, and blended oil was almost as acceptable as sesame oil(P < 0.05). The results seem to indicate that blended oil can be used as a unique substitution for sesame oil in some foods, especially in some traditional Koran food.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.