• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.156-159
• /
• 1998

토목섬유는 목적에 따라 보강, 필터, 차수, 분리등의 기능으로 널리 사용되고 있으며 최근에는 한가지 기능을 강화하거나 다기능성을 부여하기 위해 복합화한 재료들이 사용되고 있다. 현재 토목섬유는 여러종류의 관련제품이 개발되어 상품화되고 있으나 널리 사용되고 있는 품목은 가정용ㆍ산업용 폐기물 매립시 발생되는 침출수 차단 목적과 연약지반의 지지력 보강, 부등침하방지에 의한 지반보호, 흙 댐, 터널 건설 등에 이용되는 지오멤브레인과 세립토ㆍ자갈ㆍ돌덩어리ㆍ블럭등의 혼합을 막아주는 분리기능, 자체의 인장강도에 의해 흙 구조 물의 안정성을 증가시키는 보호기능을 갖는 지오텍스타일이 있다.(중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.215-216
• /
• 2003

섬유강화 복합재료(FRC:Fiber Reinforced Composites)는 기존의 금속재료에 비해 높은 비강도, 비강성의 특성으로 인해 자동차, 항공산업 등 폭 넓은 응용 범위에 적용되고 있다. 특히 직물 복합재료(Fibric Composites)는 취급이 용이하고, 유연성이 높기 때문에 복잡한 형상을 가지는 금형에 적용하기가 수월하다. 하지만 아직까지는 금형의 형상에 있어서 제약을 받고 있다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.834-842
• /
• 1991

본 연구에서는 화상처리에 이용되는 차분오퍼레이터중 Sobel오퍼레이터를 이 용하여 성형품의 윤랑선유추출을 하여, 섬유배향각분포를 구하고, Prewitt 오퍼레이터 의 경우와 비교한다. 또 프레스성형시 발생하는 장섬유의 2차원배향상태를 파악하기 위하여 섬유배향함수에 미치는 명종 성형조건의 영향에 대한 결과를 보고한다.

• Journal of Adhesion and Interface
• /
• v.8 no.3
• /
• pp.9-15
• /
• 2007

The interfacial evaluation of surface modified Jute fiber/polypropylene (PP) composites before and after hydration was investigated using micromechanical test and dynamic contact angle measurement. The IFSS of alkaline and silane-treated Jute fiber/PP composites increased, whereas after hydration, the IFSS of the untreated, alkaline- and silane-treated Jute fibers/PP composites decreased due to swelled fibrils by water infiltration. The interfacial adhesion of silane treated fiber/PP composites was higher than alkaline-treated or the untreated cases. The surface energies of Jute fiber treated under various conditions were obtained using dynamic contact angle measurement. Especially after hydration, the thermodynamic work of adhesion was calculated by considering water interlayer, which indicated the stability of IFSS between silane treated Jute fiber and PP matrix showing better than others.

• Composites Research
• /
• v.12 no.3
• /
• pp.75-83
• /
• 1999

The thermal properties of carbon/phenolic and silica/phenolic ablative composites were investigated by measuring the heat capacity, thermal diffusivity and thermal conductivity. The heat capacities of carbon/ phenolic and silica/phenolic composites were calculated from differential scanning calorimeter curve. The thermal diffusivities of carbon/phenolic and silica/phenolic composites were measured by the laser flash method with varying laminated direction, i.e., with laminar direction and across laminar direction. The thermal diffusivities decreased with increasing temperature. The thermal conductivities of carbon/phenolic and silica/phenolic composites were calculated using the heat capacity, density and thermal diffusivity. The thermal conductivities increased with increasing temperature. The thermal conductivity of with laminar direction is two times higher than that of across-laminar direction in carbon/phenolic composite due to the directionality of thermal conductivity of carbon fiber. The thermal conductivities of two dimensional fiber reinforced composites were analyzed using the conductivities of constituents and volume fraction of each constituent. The thermal conductivities of carbon fiber and silica fiber were calculated from thermal conductivities of carbon/phenolic and silica/phenolic composites. The thermal conductivities of carbon/phenolic and silica/phenolic composites at RT were predicted from thermal conductivities of fiber and resin with varying the volume fraction of fiber.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.199-204
• /
• 2013

Owing to the global energy crisis, studies have strongly focused on realizing energy savings through vehicle weight reduction using light metal alloys or polymer composites. Polymer composites afford many advantages including enabling the fabrication of complex shapes by injection molding, and glass and carbon fibers offer improved mechanical properties. However, the high temperature in an engine room and the high humidity during the rainy season can degrade the mechanical properties of the polymer. In this study, the mechanical properties of injection-molded glass-fiber-reinforced polymer were assessed at a temperature of $85^{\circ}C$ and the maximum moisture absorption conditions. The result showed a 23% reduction in the maximum tensile strength under high temperature, 30% reduction under maximum moisture absorption, and 70% reduction under both heat and moisture conditions. For material selection during the design process, the effects of high temperature and high humidity should be considered.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2328-2339
• /
• 1992

The propagation of coherent time-harmonic elastic L-and SV-waves is studied in a medium with random distribution of cylindrical inclusions. The purpose of the research is to characterize the dynamic elastic moduli and the attenuation properties of fiber-reinforced composite materials. The cylindes representing the fibers are assumed to be distributed in parallel with each other and the direction of incident waves are normal to the cylinder axes. A multiple scattering formula using the single scattering coefficients in conjunction with the Lax's quasicrystalline approximation is derived from which the dispersion relation for such medium is obtained. In order to formulate the multiple scattering interaction between cylinders, the pair correlation functions are generated by the Monte Carlo simulation technique. From the numerically evaluated complex wavenumbers, the propagation speed of the average wave, the coherent attenuation and the effective elastic moduli are presented as functions of frequency and fiber volume fraction.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.476-482
• /
• 2013

In this work, the effects of electrochemical oxidation of carbon fiber surfaces on mechanical interfacial properties of carbon fibers-reinforced polarized-polypropylene matrix composites were studied with various current densities during the treatments. Surface properties of the fibers before and after treatments were observed by SEM, AFM, XPS, and contact angle measurements. Mechanical interfacial properties of the composites were measured in terms of critical stress intensity factor ($K_{IC}$). From the results it was found that $O_{1s}$ peaks of the fiber surfaces were strengthened after electrochemical oxidation which led to the enhancement of surface free energy of the fiber, resulting in good mechanical performance of the composites. It can be concluded that electrochemical oxidation of the carbon fiber surfaces can control the interfacial adhesion between the carbon fibers and polarized-polypropylene in this composites system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.939-941
• /
• 2017

The use of composites is increasing for lightweight aerospace structures. Among these structures, the ring frame and the parts of the projectile body are mainly made of a fiber reinforced composite material which is less susceptible such as delamination to structural damage. As the use of fiber reinforced composites increases, interest in modeling efficient methods of stiffness and strength is increasing. This paper predict the mechanical strength according to the repeating unit cell(RUC) of the 2-D triaxial braided composites of fiber reinforced composites. Yarn slice definition, incremental approach and stiffness reduction model were used as strength prediction. Finally, the results of strength prediction are verified by comparing with experimental data of 2-D triaxial braided composites specimens.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.78-83
• /
• 2009

In case of endodontic treatment and extensive restoration of severe dental caries, trauma, and developmental defect, esthetic restoration of primary incisors and permanent anterior teeth for children and adolescents period is delicate matter for pediatric dentists. Existing restorative methods for anterior teeth have retentive and esthetic limitations for badly damaged teeth, especially for the adolescent anterior teeth. Therefore, the preparative stage for setting the permanent prosthesis as well as the retention and esthetics have to be considered. In this case, esthetic restoration for badly destroyed anterior teeth was tried with fiber-reinforced post and the result was satisfactory.