• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.73-73
• /
• 1997

• Journal of Adhesion and Interface
• /
• v.22 no.3
• /
• pp.85-90
• /
• 2021

Generally, the tensile strength of carbon fiber reinforced composite (CFRP) should be determined to produce this material. The tensile strength was performed based on ASTM D3039, and this test could cause the error by specimens and human. In this research, the CFRP tensile test was performed with different thickness of specimens and tap, adhesive for attaching tap, and pressure of jig to hold the specimens, while the test was performed based on ASTM D3039. The tensile stress and modulus exhibited differently with different specimen thicknesses, and the 1~1.5 mm thickness of the specimen was optimized. In the case of 0.28 MPa jig pressure, the slip or fracture at the clamping area of the specimen has not occurred, and specimens were fractured to the center section of the specimen. The adhesive to attach jig on specimen should be used to exhibit high adhesive stress. Experimental parameters could cause errors. It is expected to achieve an accurate tensile property evaluation of composite materials via improvements in adhesives, tabs, and jigs.

• Journal of the KSME
• /
• v.32 no.1
• /
• pp.18-27
• /
• 1992

섬유강화 플라스틱을 시초로 복합재료가 상업적으로 생산, 판매되기 시작한지 어언 30여년이 되었다. 뛰어난 기계적 . 화학적 특성을 바탕으로 오늘날 복합재료는 신소재의 한 분야로 굳게 자리잡고 있다. 설계, 성형, 분석기술의 발전과 아울러 유리섬유 복합재료 이후에 특성이 뛰어난 복합재료 소재들이 개발되고 있어 복합재료의 응용범위를 더욱더 넓히고 있다. Boron, carbon, aramid섬유의 개발은 첨단 복합재료의 개발을 가능케 했으며 군용, 우주기기의 개발로 얻어진 결과들은 민간 항공기 또는 스포츠, 레저 분야에 많이 이용되고 있다. 민간 항공기의 많은 부분에 첨단 복합재료로 된 부품들이 사용되고 있으며 복합재료로된 골프채, 낚시대, 테니스채 그리고 스키 등을 우리 주변에서 손쉽게 찾아볼 수 있다. 이 글에서는 고분자 기지 복합재료를 중심으로 그 성형법 및 응용에 대하여 논하고 기타 특수용도 복합재료에 대해서 약술하고자 한다.

• Composites Research
• /
• v.32 no.1
• /
• pp.50-55
• /
• 2019

In this study, we investigated the effect of fiber alignment in helicoidal structure on the mechanical properties of biomimetic fiber-reinforced composites. Using finite element analysis, circular biomimetic fiber composites were designed and studied. Various amounts of pressure loads were applied to a surface of the composites, and then bending and failure behaviors of the composites were analyzed. The results showed various failure morphologies according to the orientation of the fibers, and it turned out that the fiber alignment in helicoidal structure significantly improved the bending strength of the composite under pressure loading. This was because the fiber alignment in various directions for each layer dispersed effectively the fracture energy from the external load into multiple directions.

• Composites Research
• /
• v.32 no.6
• /
• pp.403-407
• /
• 2019

Long-fiber-reinforced composites have the advantages of cost-competitiveness and high degree of freedom of molding compared to continuous-fiber-reinforced composites. On the other hand, it is difficult to ensure uniform characteristics due to the randomly distributed fiber orientation incurred from the process of manufacturing intermediate materials. In this study, the effect of the directionality of LFPS (Long Fiber Prepreg Sheet) materials on the mechanical properties was analyzed. The eddy current measurement method was used to analyze fiber orientations, and tensile and compression tests on LFPS materials were performed according to ASTM standards. In addition, the test results and theoretical values of LFPS materials were verified using the ROM (rule-of-mixtures) theory. These results confirmed the effect of fiber orientation on mechanical properties of discontinuous-fiber-reinforced composites.

• Composites Research
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2005

In this paper, the group velocity dispersion curves of the $S_o$ symmetric mode in unidirectional CFRP plate was calculated as varying the propagating direction. The group velocity curve was obtained with the group velocities of the $S_o$ symmetric mode corresponding to 0.2 MHz-mm under the first cut-off frequency in the dispersion curves, and corrected by introducing the slowness curve. The velocities of the $S_o$ symmetric mode in the unidirectional CFRP plate were measured as varying the propagating direction and compared with the col?rotted group velocity curve. The measured velocities were good agreement with the corrected group velocity curve except near the fiber direction which was called the cusp region. It implies that the direction of the group velocities incline toward the fiber direction of the unidirectional CFRP plates when the propagation direction is not accorded with the principal axis. It is supposed that this phenomenon rerults from the preferential propagating the energy toward the direction with the faster propagation velocity.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.26
• /
• pp.4-23
• /
• 2009

선체용 복합재료 및 구조용 접착제와 신공법인 진공 성형법으로 건조한 레저선박에 강화플라스틱 구조기준을 그대로 적용하기에는 무리가 있으며, 따라서 복합재료, 수지, 접착제 및 진공 성형법 등 현장조사를 토대로 복합소재 및 접착제를 이용한 시험편을 제작하여 복합재료의 기계적 특성, 구조용 접착제에 대한 신뢰성 평가 및 국내외 기준 비교 검토를 통한 국내 실정에 적합한 검사기준을 제안하고자 한다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.101-104
• /
• 2002

직물구조 복합재료는 일방향 섬유강화복합재료에 비해 변형능력이나 인장강도가 우수하므로, 항공우주, 첨단 산업 기기에 적용될 뿐만 아니라 다른 광범위한 분야에서 사용되고 있으나 복잡한 강화구조를 가지기 때문에 그 역학적 손상거동은 파악하기가 쉽지 않다. Uetsugi 등은 직물구조 CFRP 복합재에 대하여 미세구조를 고려한 유한요소모델을 제안하여 손상진전 해석하였고, 지금까지 많은 연구자에 의해 여러 가지 수법이 제안되어져 왔으나, 아직까지 명확한 파괴거동 해석수법이 확립되어 있지 않다.(중략)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.430-435
• /
• 2013

This study is investigation of the characteristics for acoustic emission signal generated by destruction on glass fiber bundles and specimen that was machined composite materials surrounding the outside of GFRP cylinder. The Amplitude of acoustic emission signal gets bigger as the cutting angle of knife increases. Accordingly, the number of hits in destruction of composite materials specimen have more in longitudinal direction (longitudinal direction to the glass fiber) than in hoop direction (horizontal direction to the glass fiber) while the amplitude of signals were bigger in hoop direction than longitudinal direction. It was found out that the amplitude of the glass fiber breakage is more than 40 dB and that the amplitude of signal for matrix crack was less than 40 dB because matrix crack signal was not observed when threshold value is 40 dB and matrix crack signal suddenly appered when threshold value is 32 dB. The slope of the amplitude is related to the acoustic emission source and the slope of the amplitude of the horizontal and vertical directions are 0.16 and 0.08. In particular, The slope of the amplitude of longitudinal direction breakage appear similar to the glass fiber breakage and therefore Acoustic emission source of longitudinal direction breakage is estimated the glass fiber breakage.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.119-126
• /
• 1998

유리섬유 강화 열가소성 복합재료는 고상성형법에 의해 저렴한 가격으로 큰 부피의 제품의 제조에 널리 사용될 수 있어 아주 좋은 전망을 가지고 있다. 그러나 이러한 재료의 성형성이나 재료거동의 특성은 아직 잘 파악되지 않았다. 본 연구의 주안점은 이러한 재료의 단순 굽힘에서의 굽힘성형성을 연구하는데 두었다. 실험에 사용된 재료는 임의의 방향으로 위치한 유리섬유를 중량비로 20 %, 35 %, 40 % 함유한 폴리프로필렌이다 굽힘시험은 75 $^{\circ}C$에서 150 $^{\circ}C$ 사이의 온도에서 25 $^{\circ}C$ 씩 증가하면서 행했고, 편치속도는 2.54 mm/sec와 0.0254 mm/sec에서 행했다. 단순 굽힘시험에서 측정된 굽힘성형성은 해석적 모델로 예측한 결과와 비교하였다. 실험결과와 예측결과가 비교적 잘 일치함을 보였으며, 굽힘성 map으로써 성형 온도와 펀치반경의 좌굴에 대한 효과를 가시화 함은 물론 좋은 성형조건을 선정할 수 있는 좋은 도구로써 나타내었다.