• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.27-33
• /
• 1987

The environment and biological studies of tritium have been carried out in the advanced countries since the mid 1950's. In the case of a potential tritium exposure, the usual procedure is trifium bioassay (as HTO) in human urine in order to determine the amount of tritium deposited in the body called tritium body burden. The maximum permissible body burden(MPBB) of tritium in total body is about $30{\mu}Ci/{\ell}$ for body tissue. In the bioassay, the most common investigation level for detection of tritium in urine is 1/10th of MPBB. For this bioassay project, the first priority is given to obtaining a quench correction curve. This consideration is necessary because of the variability in color of human urine specimens. Quenching effect in this case mainly is caused by the absorption of scintillation light flashes by the urine sample. By the least squares method on the statistical basis, an estimated formula for quench correction curve was determined to be Y = 0.771 + 1.836 ${\tmes}10^{-4}$X, where the efficiency(Y) was ranged from about 12% to 31% in the liquid scientillation counting. In this paper, a brief theory concerning the biological half-life of tritium and the retention formula to apply to systematically distributed tritium are described.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.87-92
• /
• 2016

The importance of heat dissipation for the electric device modules along the thickness direction is increasing. Two types of two-layered materials, metal-metal bonding and dielectric-metal bonding, have been fabricated by roll bonding process and a thermal diffusivity of the specimens was measured along the thickness direction. The thermal diffusivity of specimens with metal-metal bonding measured by light flash analysis (LFA) showed a same value independent on the direction of heat flow. However, the thermal diffusivity of specimens with dielectric-metal bonding showed a big difference of 17.5% when the direction of heat flow changed oppositely in the LFA process. The measured thermal diffusivity of specimens when the heat flows from metal to dielectric direction showed smaller value of 17.5% compared to the value when the heat flow from dielectric to metal direction. The difference in thermal diffusivity of specimens with dielectric-metal bonding dependence on direction of heat flow is due to the electron-phonon resistance that occurred transfer process of electron energy to phonon energy near the interface.

• Journal of Adhesion and Interface
• /
• v.9 no.3
• /
• pp.7-13
• /
• 2008

The particulate type silicon carbide (SiC) and fiber type carbon fiber (CF) filler, of similar thermal conductivities, were mixed with polyetheretherketone (PEEK) to investigate the filler effects on the thermal diffusivity. The SiC and CF fillers had a good and uniform dispersion in PEEK matrix. Thermal diffusivities of PEEK composites were measured from ambient temperature up to $200^{\circ}C$ by laser flash method. The diffusivities were decreased as increasing temperature due to the phonon scattering between PEEK-filler and filler-filler interfaces. Thermal diffusivity of PEEK composites was increased with increasing filler content and the thermal conductivities of two-phase system were compared to the experimental results and it gave ideas on the filler dispersion, orientation, aspect ratio, and filler-filler interactions. Nielson equation gave a good prediction to the experimental results of PEEK/SiC. The easy network formation by CF was found to be substantially more effective than SiC and it gave a higher thermal diffusivities of PEEK/CF than PEEK/SiC.

• Journal of Radiation Protection and Research
• /
• v.17 no.2
• /
• pp.25-35
• /
• 1992

To evaluate tritium level in some environmental samples, tissue-free water tritium (TFWT) and tissue-bound tritium (TBT) were analyzed in rices, chinese cabbages and pine needles collected at 12 locations in Korea. The TFWT was recovered by freeze-drying of the samples and the TBT was obtained in the form of water by combustion of the dried samples. Tritium was measured by liquid scintillation counter. The concentrations of TFWT were in the range of $0.96{\sim}3.96 Bq/1,\; 0.83{\sim}3.40 Bq/1\;and\;1.02{\sim}3.01 Bq/1$ in rices, chinese cabbages and pine needles, respectively. The mean specific activity ratios (TBT/TFWT) were 0.94, 1.71 and 1.39 in rices, chinese cabbages and pine needles, respectiviely. This excess TBT in the samples may be attributed to the fact that the residence time of TBT in the plant is longer than that of TFWT. The specific activity ratio depends on the plant species, the exposed time to tritiated atmosphere, atmospheric moisture, temperature and diffusion factor.

• Journal of the Korean Society of Radiology
• /
• v.7 no.3
• /
• pp.245-249
• /
• 2013

Neutron sources from photonuclear reaction with 46-MeV electron linear accelerator at Research Reactor Institute, Kyoto University used for resonance energy measurement of natural tantalum. BGO($Bi_4Ge_3O_{12}$) scintillation detectors used for measurement of the prompt gamma ray from the natural tantalum sample. The BGO spectrometer was composed geometrically as total energy absorption detector. The electric signal from the spectrometer was analyzed for TOF(Time-of-Flight) spectrum which is used identification of neutron capture resonance energy. In this study, the neutron energy region is from 1 to 200 eV, because of strong X-ray effect produced photonuclear reaction in Ta target, the measurement was performed to below 1 keV energy region. The resonance energy was compared with the evaluated values(ENDF/B-VI, Mughabghab). All of the resonances from 4.28 ~ 200 eV were seen in the present measurement except 144.3 eV resonance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.146.2-146.2
• /
• 2014

KIST 6MV 가속기는 이온빔 분석 그리고 가속기 질량 분석법(Accelerator mass spectrometry)으로 활용된다. 이온빔 분석으로는 RBS, TOF ERD, PIXE. ${\mu}$-Probe을 할 수 있으며 AMS(Accelerator mass spectrometry)는 액체섬광측정법(LSC)과 비교할때 민감도는 1,000배 정도로 3H, 14C, 26Al,41Ca 을 10-21 ~ 10-18 mole/mg 까지 검출 가능하여. 응용분야로는 BAMS(Biological AMS), 전통과학, 지구과학, 환경과학에 활용되고 있다. 이중 AMS의 생-의학분야(BAMS)의 응용은 최근 매우 중요하게 연구되고 있다. BAMS의 활용 연구에 사용하는 핵종으로는 주로 3H, 14C, 41Ca, 36Cl를 사용하며, 14C 화합물은 쉽게 구할 수 있고, 자연방사선 이하의 낮은 14C labeled drug 사용하기 때문에 1948년 이후 생물학 연구에 혁신적으로 활용되고 있다. 주 활용분야로는 (1) 신약개발은 임상실험 전(Phase 0) 이용되며, 14C로 표지된 bio-molecule을 자연수준의 방사선 농도에서 추적자로 사용하여 질량을 측정하는 방법을 활용. (2) 의과학분야는 인체 내에서의 추적자 연구수행 (3) 항암제 연구는 암조직 중 약물농도와 암효과의 상관성을 연구 (4) 바이오 기술 분야에서는 생약 유효물질의 체내 대사연구 등을 할 수 있어 전세계적으로 활발히 연구가 진행되고 있다. KIST에서는 6MV가속기를 BAMS 연구에 활용하기 위하여 전처리 단계의 Combustion, Gas transfer, Reduction 등을 자체 제작하여 테스트 중에 있으며, BAMS 샘플의 Gas는 호기중의 성분, 대기 성분이 있으며, Liquid는 혈액(혈장,혈청,적혈구), Solid는 DNA, 세포, 장기 뼈, 피부, 식물조직, 사료, Drug 및 그 대사 류가 있다. AMS 측정 결과는 14C/12C 비율로 나타나며 그 결과를 농도로 환산하여 분석하게 된다. 또한 분석 데이터 신뢰를 확보하기 위하여 표준시료 및 품질관리용 시료를 사용하여 BAMS분석법에 대한 검증을 실시하였다.

• Journal of the Korean Society of Radiology
• /
• v.1 no.1
• /
• pp.45-49
• /
• 2007

keV-neutron capture gamma-ray spectrum of $^{197}Au$(natural gold) sample have been measured in neutron energy range from 10 to 90 keV using the 3-MV pelletron accelerator of the Research Laboratory for Nuclear Reactors at the Tokyo Institute of Technology. Pulsed keV neutrons were produced from the $^7Li(p,n)^7Be$ reaction by bombarding on the $^7Li$ target with the 1.5-ns bunched proton beam. The incident neutron spectrum on the Au sample was measured by a $^6Li$-glass scintillation detector and TOF method. Capture gamma-rays from Au sample were measured by anti-Compton NaI(TI) spectrometer. Five average neutron energy regions were selected to obtain the neutron capture spectrum. Several gamma-ray peaks in the spectrum were found in the present experiment.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.284-289
• /
• 2005

According to the nuclear safety regulation policy including the administration of radionuclides in low level radwastes, the evaporator bottoms were mixed with cement to form a stable solidification for identifying the recovery possibility of the C-14. The chemical oxidation method was applied for the extraction of C-14 from the cement waste form. The emitting beta ray of the C-14 extracted from the radwastes was measured with the liquid scintillation counter and calculated by using the quenching correction curves. Only the beta emitting radioactive nuclides of the C-14 in the radwastes was showed the radioactivities with the range of $2.7E+00\;{\sim}\;3.07E+02$ Bq/g.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.87-100
• /
• 1990

For the quantitative evaluation and assessment of radiation exposure from terrestrial component of natural environmental radiation, successive thermoluminescence dosimetry and periodical in-situ gamma ray spectrometry were carried out for a period of 24 months. LiF PTFE dise TLDs and $3&{\phi}{\times}3'$cylindrical NaI(Tl)scintill ation detector in association of portable multichannel analyzer (4096 ch) were used in this study. The doses measured were evaluated and assessed in terms of effective dose equivalent. As a concomitant output, the dose equivalent due to ionizing component of cosmic ray was able to be evaluated. According to the results obtained in terms of variance weighted mean, the annual effective dose equivalents of terrestrial gamma ray and cosmic ray ionizing component in Taejeon area came out to be $564{\pm}4\;{\mu}Sv(64.8{\pm}0.5nSv{\cdot}h^{-1}$ and $300{\pm}2\;{\mu}Sv(34.3{\pm}0.2nSv{\cdot}h^{-1}$, respectively, which are reasonable comparably with that appeared in UNSCEAR Report[28]as per caput annual effective dose equivalent in 'areas of normal background radiation'.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.166-166
• /
• 2013

최근에 희토류 이온이 도핑된 형광체를 발광 소자, 레이저, 섬광재료, 광섬유, 촉매, 디스플레이와 같은 다양한 분야에 응용하기 위한 연구에 상당한 관심이 집중되고 있으며, 희토류 이온이 도핑된 발광 물질은 음극선관, 램프 조명, 플라즈마 디스플레이, X선 검출기, 전계 방출 디스플레이 소자를 포함한 다양한 영역에 응용되고 있다. 본 연구에서는 고상 반응법을 사용하여 발광 효율이 높은 적색과 주황색 형광체를 제조하고자 서로 다른 활성체 이온 Eu3+, Sm3+의 농도를 변화 시키면서 두 종류 Ca1-1.5xTa2O6:Eux3+와 Ca1-1.5xTa2 O6:Smx3+ 형광체 분말을 합성하였다. 특히, 활성제 이온의 농도비에 따른 형광체 분말의 결정 구조, 표면 형상, 입자의 크기, 흡광과 발광 특성을 측정하였다. 그림은 활성체 이온의 함량비를 달리하여 합성한 Ca1-1.5xTa2O6:Eux3+, Ca1-1.5xTa2O6:Smx3+ 형광체 분말에서 측정한 흡광(photoluminescence excition) 스펙트럼의 결과를 나타낸 것이다. 여기 파장 399 nm로 여기 시킨 Ca1-1.5xTa2O6:Eux3+ 형광체 분말의 경우에, 발광 세기가 가장 강한 617 nm의 주 피크가 관측되었다. 또한, 여기 파장 410 nm로 여기 시킨 Ca1-1.5xTa2O6:Smx3+ 형광체 분말의 경우에는 발광 세기가 가장 강한 주 피크는 609 nm에서 나타났다. 실험 결과로부터, Eu3+와 Sm3+ 이온이 각각 도핑된 CaTa2O6 형광체의 경우에는 색 순도가 높은 파장과 발광 세기는 Eu3+ 이온인 경우에 0.15 mol, Sm3+ 이온이 도핑되는 경우에는 0.05 mol이 최적의 합성 조건임을 알 수 있었다.