• 레미콘
• /
• no.10 s.57
• /
• pp.80-90
• /
• 1998

본 내용은 콘크리트의 품질관련 업무를 수행하는 실무자에게 도움을 주고자 레미콘 핸드북의 '레미콘의 배합설계'에서 정리 발췌한 것임

• Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.15-17
• /
• 2023

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.128-133
• /
• 2020

This study was conducted to demonstrate the manufacturing process for producing high-quality solar salt. The design criteria of the manufacturing process, which was studied in a previous study, was applied to an actual manufacturing system to evaluate its performance. The design factors applied were the drying air temperature and the temperature of the washing water. They were 100℃ or less and 10℃ or less, respectively. Two standards were applied to the process performance evaluation. Standard (I) was the international food standard for solar salt, and standard (II) was the quality standard for high-quality solar salt production. The main quality evaluation items were the moisture content and salinity, and the color characteristics were also measured (p<0.05). The manufacturing process of solar salt consisted of five steps, and the quality change was measured for each step. The measured quality was appropriate to the standard (I) from the third-step process. In addition, the quality of the high-quality solar salt was suitable for the standard (II) from the fourth-step process. Therefore, the performance of the proposed solar salt production process met international standards. The improvements in the production of high-quality solar salt will improve international competitiveness in the future.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.2
• /
• pp.211-218
• /
• 2010

Taguchi has used the signal-to-noise ratio (SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. Moreover, there are difficulties in practical application, such as complexity and nonlinear relationships among quality characteristics and design (control) factors, and interactions occurred among control factors. Neural networks have a learning capability and model free characteristics. There characteristics support neural networks as a competitive tool in processing multivariable input-output implementation. In this paper we propose a substantially simpler optimization procedure for parameter design using neural network without resorting to SN. An example is illustrated to compare the difference between the Taguchi method and neural network method.

• Journal of KIISE:Software and Applications
• /
• v.37 no.6
• /
• pp.430-445
• /
• 2010

Effective service description and modeling methodologies are essential for dynamic service composition to provide autonomous services for users in ubiquitous computing environments. In our previous research, we proposed a 'u-Service' as an abstract and structured concept for operations of devices in ubiquitous environments. In addition, we established the mechanism to structure u-Services as an ontology and the description specification to represent attributes of u-Services. However, it did not provide enough methods or standards to analyze and evaluate the effectiveness of the u-Service ontology in the design time. Since existing quality models for software products or computing systems cannot consider characteristics of ubiquitous services, they are not suitable for ubiquitous service ontology. Therefore, in this paper, we propose a quality evaluation model to design and modeling a good ubiquitous service ontology, based on our u-Service ontology building process. We extract modeling goals and evaluation indicators according to characteristics of ubiquitous service ontology, and establish quality metrics to quantify each quality sub-characteristics. The experiment result of the proposed quality evaluation model for u-Service ontologies which are constructed for our previous works shows that we can analyze the design of ubiquitous service ontology from various angles, and indicate recommendations for improvement.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.286-289
• /
• 2003

In turn-key projects, escalation of cost by design errors is not allowed because a contractor prepares the design. Therefore, cost escalation by design errors results in increasing the cost of the prime contractor. The rate of profit decreases finally. In addition, design errors bring not only schedule delay but also serious quality problem by unknown errors. This study tries to dissolve problems, that of cost increase. process delay and a falling-off in quality by investigating cause of design errors and presenting a scheme for reducing design errors.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.65-66
• /
• 2011

독립부하가 존재하는 계통연계 인버터에서 LCL필터 설계시 계통으로 주입하는 전류뿐만 아니라 독립부하 전압품질도 고려되어야 한다. 또한, LCL필터의 가격과 부피측면을 고려하여 고조파 감쇠율은 기준을 만족하면서 인덕턴스와 캐패시턴스는 가능한 작게 설계하는 것이 중요하다. 본 논문에서는 계통전류의 고조파 기준은 만족하고, LCL필터 모델로부터 구해지는 전달함수를 이용하여 계통연계시와 독립운전시 모두 독립부하의 전압품질이 만족하도록 필터설계를 한다. 또한, 독립부하 전압리플, 인덕터 부피, 무효전류량, 시스템 대역폭에 가중치를 적용한 LCL필터 최적설계 방법을 제안한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.775-783
• /
• 2005

이동통신 네트워크의 위치영역 설계는 위치관리 비용을 최소화하도록 네트워크를 위치영역으로 분리하는 문제이다. 기존 위치영역 설계 관련 연구는 설계의 모수가 되는 호 발생률 및 셀 간 가입자 이동률을 고정된 것으로 가정하였다. 그러나 실제 환경에서의 두 모수는 시간에 따라 변화하고, 일정한 패턴을 나타내며, 시간 당 셀 내 인구에 영향을 받는다. 본 연구에서는 이러한 인구유동 및 호 발생의 불확실성 및 시간에 따는 패턴 변화를 고려하여 기준 이상의 페이징 서비스 품질을 만족시키고, 비용을 최소화 하는 위치영역 설계 방식을 제안하였다. 모수의 변동에 일정 서비스 품질을 보장하기 위해 시간대 및 가동률 상한의 개념을 도입하여 추계적 문제를 정적 그래프 분리문제로 변환하였고, 이에 대한 솔루션은 Simulated Annealing을 응용한 경험적 최적해 도출 알고리즘을 이용하여 도출했다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.380-381
• /
• 2013

중요부하가 존재하는 계통연계 단상 인버터에서 LCL필터 설계시 계통으로 주입하는 전류뿐만 아니라 중요부하 전압품질도 고려되어야 한다. 또한, LCL필터의 가격과 부피측면을 고려하여 고조파 감쇠율 기준을 만족하면서 인덕턴스와 캐패시턴스는 가능한 작게 설계하는 것이 중요하다. 본 논문에서는 계통 전류의 고조파 기준을 만족하고, LCL필터 모델로부터 구해지는 전달함수를 이용하여 계통연계시와 독립운전시 모두 중요부하의 전압품질이 만족하도록 단상 인버터의 필터설계를 한다. 또한, 중요부하 전압리플, 인덕터 부피, 무효전류량, 시스템 대역폭에 가중치를 적용한 LCL필터 최적설계 방법을 제안한다.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.445-458
• /
• 2008

Image chain analysis of synthetic aperture radar (SAR) satellite is one of the primary activities for satellite design because SAR image quality depends on spacecraft bus performance as well as SAR payload. Especially, satellite pointing and stability error make worst effect on the original SAR image quality which is implemented by SAR payload design. In this research, Image chain analysis S/W was developed in order to analyze the SAR image quality degradation due to satellite pointing and stability error. This S/W consists of orbit model, attitude control model, SAR payload model, clutter model, and SAR processor. SAR raw data, which includes total 25 point targets in the scene of $5km{\times}5km$ swath width, was generated and then processed for analysis. High resolution mode (spotlight), of which resolution is 1m, was applied. The results of image chain analysis show that radiometric accuracy is the most degraded due to the pointing error. Therefore, the successful design of attitude control subsystem in spacecraft bus for enhancing the pointing accuracy is most important for image quality.