• 전기의세계
• /
• v.36 no.10
• /
• pp.741-749
• /
• 1987

본고의 내용은 다음과 같다. 1. 노풍압 및 풍속자료 2. 설계용 풍압의 상정과정 3. 재현기간별 극치풍속 및 돌풍풍속 산정 4. 미관측지역의 기준풍속(압)산정 5. 설계 기준풍압

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.615-623
• /
• 2015

Estimation of wind load on bridges is one of the most important aspects in designing bridges in coastal region. Various design codes and researches have suggested the procedure to estimate design wind speed; however, they do not match one another due to many reasons such as incomplete data set, ignorance of wind environment and so on. For this reason, the necessity of guideline for estimation procedure of basic wind speed which reflect the roughness of surface and the topographical effect have been increasing. In this study, we have analysed limitations of the basic wind speed of nationwide suggested by Korea Building code(AIK, 2009) and Highway bridge design code(MOLTMA, 2010). In additional, we set forth guidelines considering the roughness of land surface and the topographical effect. Using the procedure, the basic wind speed were estimated for 15 coastal regions in Korea and compared with those listed in the existing codes.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.652-654
• /
• 2007

본 논문에서는 국가의 기간 에너지원인 전력망을 구성하는 구조물인 송전철탑의 설계하중에 가장 큰 요인으로 작용하는 기준풍속 산정을 위한 연구내용을 고찰하고자 한다. 현행의 송전용 지지물 설계 기준은 전기설비기술기준에 고시된 가공전선로 지지물에 관한 기준을 토대로 전력사의 실무적인 설계를 위하여 보다 구체화하여 작성된 한국전력공사 송전설계기준에 근거하고 있다. 이러한 기존 설계기준은 1985년 이전의 기상자료를 토대로 제정되어 본 논문에서는 1980년대 후반부터 약 20년간의 기상청의 풍향, 풍속자료를 추가로 확보하고 이를 분석하여 재현기간을 반영한 지역별 설계기준 풍속 Map을 제시하였다. 이러한 흐름으로 최근의 기상자료를 포함하여 보다 정확한 분석을 도모하고, 사회 환경의 급변함에 따라 우려되는 기상이변 등을 고려한 안전성과 경제성이 향상된 기준풍속 산정과정을 고찰하고, IEC 등 해외 주요국의 풍하중 설계기준에서 반영하고 있는 국부지형을 고려한 설계방법에 대한 국내 기준 적용성 평가를 위한 비교분석 결과를 소개하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.452-453
• /
• 2008

본 논문에서는 송전철탑에 작용하는 설계하중으로서 [송전철탑 설계풍속에 관한 연구]에 근거하여 1987년 6월 제정된 지역별설계 풍하중기준의 개정을 위한 연구결과를 수록하였다. 당시 제정된 송전설계기준은 이전에 전국적으로 통일시켜 적용되던 풍속압($76kg/m^2$)을 지역별 풍속을 구분하여 그 차이에 따라 I, II, III, 지역 및 울릉도로 구분하여 차등 적용하였으며, 본 연구에서는 국내 기상청이 생긴 이래 2005년까지 누적된 기상 DB의 분석을 통하여 최근의 기상 현상을 반영한 보다 현실적인 설계기준 개정과정을 수록하였다. 본 논문에서는 1980년대 후반부터 약 20년간의 기상청의 풍향, 풍속자료를 추가로 확보하여 이를 분석하고 재현기간을 반영한 지역별 설계하중을 재산정하여 최근의 기상자료를 포함하여 보다 정확한 분석을 도모하고, 사회 환경의 급변함에 따라 우려되는 기상이변 등을 고려한 안전성과 경제성이 향상된 설계기준의 산정과정을 고찰하고자 한다.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.135-146
• /
• 2015

To provide the data necessary to determine the design wind speed for calculating the wind load acting on a greenhouse, we measured the wind speed below 10m height and analyzed the power law exponents at Buan and Gunwi. A wind speed greater than $5m{\cdot}s^{-1}$ is appropriate for calculating the power law exponent necessary to determine the wind speed distribution function according to height. We observed that the wind speed increased according to a power law function with increased height at Buan, showing a similar trend to the RDC and JGHA standards. Therefore, this result should be applied when determining the power law function for calculating the design wind speed of the greenhouse structure. The ordinary trend is that if terrain roughness increases the value of power law exponent also increases, but in the case of Gunwi the value of power law exponent was 0.06, which shows contrary value than that of the ordinary trend. This contrary trend was due to the elevations difference of 2m between tower installed and surrounding area, which cause contraction in streamline. The power law exponent started to decrease at 7 am, stopped decreasing and started to increase at 3 pm, and stopped increasing and remained constant at 12 pm at Buan. These changes correspond to the general change trends of the power law exponent. The calculated value of the shape parameter for Buan was 1.51, confirming that the wind characteristics at Buan, a reclaimed area near the coast, were similar to those of coastal areas in Jeju.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.409_411
• /
• 2009

국내의 송전선 지지물 설계는 전기설비기술기준과 한국전력공사 송전설계기준에 근거하여 적용되며, 철탑하중에 큰 비중을 갖는 풍하중기준은 1985년 기상청의 풍속 데이터를 반영하여 1987년경에 제정된 지침을 지금까지 적용하고 있다. 당시 제정된 설계기준에서는 지역별 풍속 차이에 따라 I, II, III, 지역 및 울릉도로 구분하여 차등 적용하는 설계개념으로 주변여건을 고려하지 않고 동일한 지역내에 위치하고 있는 송전지지물의 경우에는 동일한 풍하중을 적용하는 방식이다. 최근 해외 철탑설계기준과 국내 건축물 설계기준에서는 전산기술의 발달로 국부적인 지형영향을 고려하여 철탑별로 개별적인 풍하중을 산정하는 방식을 채택하고 있다. 본 논문에서는 상용 송전선로 설계가 진행되고 있는 군산-새만금 예정 경과지 가운데 지형조건을 고려한 풍속할증이 요구되는 개소에 대한 설계 풍하중 검토사례를 소개한다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.9-14
• /
• 2010

Recent increase in the strength and frequency of typoons due to climate change claims reconsideration of the design wind load in existing design codes for civil engineering structures in which the basic wind speed is estimated based on meteorological data by mid 1990s. In this paper, based on wind speed data at 76 observatories in Korea from 1961 through 2008, the basic wind speeds which can be utilized in designing civil engineering structures including buildings and bridges are estimated using the statistical process. The return period of the wind speed for each location is determined using the Gumbel distribution. The results for considered locations are compared to the existing design codes. Also, for design applications, the wind speed map, which classifies the country into four basic wind speed zones, is proposed using the resulting basic wind speeds.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.1-10
• /
• 2008

In this study, the effects of vent location, outside temperature, wind velocity and fire size on the performance of natural venting of the vertical vent designed according to NFPA 204 standard and fire characteristics were numerically investigated using CFAST. In cases of the Vent located on most upper wall, lower outside temperature and lower wind velocity, vents met the performance criteria of venting. The larger fire size becomes, the more mass flow rate through a vent becomes, but the lower interface height of smoke layer becomes, so that vent didn't meet the performance criteria of venting. It should be noted that a natural vertical vent be designed considering maximum outside temperature and maximum wind velocity and developing a design fire accurately in order to meet the performance criteria of venting.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2021

Purpose: The purpose of this study is to analyze the differential pressure and velocity to prevent smoke backflow of Stairways Apartment House fire, and verified the effectiveness of smoke velocity standards proposed by NFSC 501A. Method: The smoke control design of the stairways apartment house of the real model and the performance of the velocity to prevent smoke backflow according to the window opening conditions of the living room were analyzed using the CONTAM program. Result: Although the differential pressure performance of the apartment's smoke control system was satisfactory, it was found that Performance of velocity to prevent smoke backflow did not come out according to the opening condition of the living room window. Conclusion: In the case of Stairways Apartment House, it is necessary to review the method of making exceptions to the 'velocity to prevent smoke backflow' standard required by the National Fire Safety Codes(NFSC 501A)

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.3
• /
• pp.126-135
• /
• 2013

With more than 70% of the country consisting of mountains, Korea has large and small mountains, and hills located in the inner cities. Therefore, Korea's architectural structure laws stipulate that an increase in wind speed due to the influence of terrain should be considered in the design of wind loads of buildings. But if more than two mountains are located around the building or if the boundaries of the land surface are not clear when calculating topographic factors of wind speed, the designer has subjectively selected the coverage of the topographic factors of wind speed or the surface. This may lead to unscientific design of wind loads. This study attempts to analyze topographic factors of wind speed by using a 1:5000 topographic map with relatively high location accuracy and thereby to reflect changes due to the topographic characteristics and influence at the point where the building is located. By also selecting terrain surfaces and vertexes through Arc GIS and presenting a scientific approach to determine the range of topographic factors of wind speed, this study is expected to make a contribution for more rational and cost-effective wind-resistant design of buildings.