• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.286-289
• /
• 2003

In turn-key projects, escalation of cost by design errors is not allowed because a contractor prepares the design. Therefore, cost escalation by design errors results in increasing the cost of the prime contractor. The rate of profit decreases finally. In addition, design errors bring not only schedule delay but also serious quality problem by unknown errors. This study tries to dissolve problems, that of cost increase. process delay and a falling-off in quality by investigating cause of design errors and presenting a scheme for reducing design errors.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.65-66
• /
• 2011

독립부하가 존재하는 계통연계 인버터에서 LCL필터 설계시 계통으로 주입하는 전류뿐만 아니라 독립부하 전압품질도 고려되어야 한다. 또한, LCL필터의 가격과 부피측면을 고려하여 고조파 감쇠율은 기준을 만족하면서 인덕턴스와 캐패시턴스는 가능한 작게 설계하는 것이 중요하다. 본 논문에서는 계통전류의 고조파 기준은 만족하고, LCL필터 모델로부터 구해지는 전달함수를 이용하여 계통연계시와 독립운전시 모두 독립부하의 전압품질이 만족하도록 필터설계를 한다. 또한, 독립부하 전압리플, 인덕터 부피, 무효전류량, 시스템 대역폭에 가중치를 적용한 LCL필터 최적설계 방법을 제안한다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.775-783
• /
• 2005

이동통신 네트워크의 위치영역 설계는 위치관리 비용을 최소화하도록 네트워크를 위치영역으로 분리하는 문제이다. 기존 위치영역 설계 관련 연구는 설계의 모수가 되는 호 발생률 및 셀 간 가입자 이동률을 고정된 것으로 가정하였다. 그러나 실제 환경에서의 두 모수는 시간에 따라 변화하고, 일정한 패턴을 나타내며, 시간 당 셀 내 인구에 영향을 받는다. 본 연구에서는 이러한 인구유동 및 호 발생의 불확실성 및 시간에 따는 패턴 변화를 고려하여 기준 이상의 페이징 서비스 품질을 만족시키고, 비용을 최소화 하는 위치영역 설계 방식을 제안하였다. 모수의 변동에 일정 서비스 품질을 보장하기 위해 시간대 및 가동률 상한의 개념을 도입하여 추계적 문제를 정적 그래프 분리문제로 변환하였고, 이에 대한 솔루션은 Simulated Annealing을 응용한 경험적 최적해 도출 알고리즘을 이용하여 도출했다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.380-381
• /
• 2013

중요부하가 존재하는 계통연계 단상 인버터에서 LCL필터 설계시 계통으로 주입하는 전류뿐만 아니라 중요부하 전압품질도 고려되어야 한다. 또한, LCL필터의 가격과 부피측면을 고려하여 고조파 감쇠율 기준을 만족하면서 인덕턴스와 캐패시턴스는 가능한 작게 설계하는 것이 중요하다. 본 논문에서는 계통 전류의 고조파 기준을 만족하고, LCL필터 모델로부터 구해지는 전달함수를 이용하여 계통연계시와 독립운전시 모두 중요부하의 전압품질이 만족하도록 단상 인버터의 필터설계를 한다. 또한, 중요부하 전압리플, 인덕터 부피, 무효전류량, 시스템 대역폭에 가중치를 적용한 LCL필터 최적설계 방법을 제안한다.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.445-458
• /
• 2008

Image chain analysis of synthetic aperture radar (SAR) satellite is one of the primary activities for satellite design because SAR image quality depends on spacecraft bus performance as well as SAR payload. Especially, satellite pointing and stability error make worst effect on the original SAR image quality which is implemented by SAR payload design. In this research, Image chain analysis S/W was developed in order to analyze the SAR image quality degradation due to satellite pointing and stability error. This S/W consists of orbit model, attitude control model, SAR payload model, clutter model, and SAR processor. SAR raw data, which includes total 25 point targets in the scene of $5km{\times}5km$ swath width, was generated and then processed for analysis. High resolution mode (spotlight), of which resolution is 1m, was applied. The results of image chain analysis show that radiometric accuracy is the most degraded due to the pointing error. Therefore, the successful design of attitude control subsystem in spacecraft bus for enhancing the pointing accuracy is most important for image quality.

• Convergence Security Journal
• /
• v.12 no.4
• /
• pp.115-122
• /
• 2012

As the most common application development of software development time, error-free quality, adaptability to frequent maintenance, such as the need for large and complex software challenges have been raised. When developing web applications to respond to software reusability, reliability, scalability, simplicity, these quality issues do not take into account such aspects traditionally. In this situation, the traditional development methodology to solve the same quality because it has limited development of new methodologies is needed. Quality of applications the application logic, data, and architecture in the entire area as a separate methodology can achieve your goals if you do not respond. In this study secure coding, the big issue, web application factors to deal with security vulnerabilities, web application architecture, design procedure is proposed. This proposal is based on a series of ISO/IEC9000, a web application architecture design process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.183-194
• /
• 2011

Synthetic aperture radar (SAR) is widely used because of high resolution imaging capability in all weather and day/night condition. In this paper development of Spotlight SAR simulator is proposed for image quality analysis. Proposed SAR simulator is based on the SAR system design parameters so that SAR image performance can be expected which is essential throughout the full system development procedure from the initial concept design stage to the final in-flight calibration and validation stage. The raw data of ideal point target is first generated by taking account of the flight and imaging geometry and the various SAR system design parameters, and the Spotlight image formation algorithm is implemented in order to obtain the point target response. Finally the image quality of the generated raw data is analyzed in terms of spatial resolution, peak to sidelobe ratio and integrated sidelobe ratio.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.361-364
• /
• 2010

본 연구에서는 최근 건설산업의 대형화, 복잡화 등으로 인해 설계와 시공의 불확실성 증가로 대두되고 있는 개방형 BIM 환경에서의 품질검토를 관점으로 표준적인 검증 프로세스에 활용되고 있는 표준 포맷인 IFC를 기반으로 호환성을 시험하였다. 개방형 BIM기반의 품질 검토는 물리정보 품질, 논리정보 품질, 데이터 품질로 구분할 수 있으며, 본 연구에서는 각 품질 검토의 구분에 따라 다양한 측면으로의 호환성 시험을 수행하였다. 그에 따라 호환성 시험 결과를 도출하고, 현 상황의 문제점 및 해결방안을 제시하여 향후 효율적인 개방형 BIM 환경에서의 품질 검토를 위해 필요한 요구 조건 및 적용 방향을 제시하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.270-275
• /
• 2018

Method for improving the image quality are divided into a tone mapping method and a retinex theory based method. Typical example of the image quality enhancement method using tone mapping method is one using image characteristics like histogram. In this paper, we propose a hardware design of real-time wide dynamic range algorithm based on tone mapping method for image quality enhancement. The proposed method divides the image into the luminance and chroma components and then improves the chroma region based on the variation of the luminance component. Adding to that, it is designed to be compatible with the existing 8-bit signal, using high quality image with 12-bit extended signal according to the desired flow. As a result of simulation, it is confirmed that the image quality is improved, and the hardware design is confirmed that the real-time operations is possible at the maximum frequency at 138.26MHz.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.559-564
• /
• 2010

This paper proposes an advanced filter design to improve power quality of a head electric power (HEP) as a power conversion unit in centralized-power type electric railway vehicle. First of all, we have measured waveform of output power of transformer connected HEP to design the filter. Throughout experiment and simulation results, it is estimated that switching technique used HEP is advanced selected harmonic elimination PWM (SHEPWM) and the applied switching frequency is about 300Hz. In this paper, a filter to improve power quality considering estimated parameters is designed. As a result, the reduction of the magnitude of the overall harmonic is achieved and confirmed through simulations.