• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.243-251
• /
• 2011

An apparatus for measuring the refrigeration capacity of cryopump refrigerators including the pulse tube type being developed domestically and the GM type has been designed, manufactured, and tested. The refrigeration capacity of a commercial refrigerator was evaluated for confirming the measurement procedure and the operation performance of the apparatus. The measured 2-D refrigeration capacity chart showed the intrinsic characteristics of the refrigerator model used in the experiment. In this paper, design specifications and test results of the refrigeration capacity measurement system is reported and discussed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.1
• /
• pp.37-47
• /
• 2003

In this paper, a component was designed for a loom in a window, and then a user interface was implemented to be able to connect database and to process various queries. The implemented system has aggregate query processing functions for the loom components existing in the selected area by the mouse and it also supports high level query processing functions represented with chart and pivot table; we can use it as a decision support system. The proposed system can detect temporal or persistent problems in the looms. Therefore, it can be used to raise the productivity and to reduce the cost in textile companies by coping with the situation properly.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.4
• /
• pp.319-327
• /
• 2002

In this research, problems of recent design methods and their improvement for SIP(Soil-Cement Injected precast Pile) in domestic areas were studied by using the properties of load-settlement curves and bearing capacity from field loading tests. Elastic and plastic settlement for total settlement in each loading step of loading tests conducted in domestic areas has been shown to have a tendency. From this tendency and bearing capacity determined by loading tests, it could be ascertained that empirical chart could be an assistant tool in SIP design. It was shown that SIP design using N-value in domestic area with soil condition of granitic type resulted in very conservative hearing capacity. On the other hands, in soil with unfitted geological conditions, the design could be insecure. Also, we could ascertain that Meyerhof's bearing capacity using modified N-value on the tip part of pile was more applicable than recent design method where tip bearing capacity was 20NA$_p$ N-value limited to 50. These results showed that modified design method could be more economic than those in the past because it used pile's bearing capacity unto tolerable load of pile material.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.698-703
• /
• 2007

In this paper, a novel impedance tuner using a directional coupler is proposed. The design topology is analyzed by signal flow graph(SFG) and shows advantages compared with conventional single and double stub methods from the view points of easy implementation and wide tuning range, respectively. This impedance tuner consists of ten switches and its $2^{10}$ tuning points are distributed uniformly on the whole Smith chart. The measured maximum magnitude of the reflection coefficient is 0.9. And the fabricated impedance tuner has a wide bandwidth from 1.8 to 2.2 GHz. Using this impedance tuner, we did a load-pull measurement of a power transistor.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.43-50
• /
• 2000

This paper presents the measured performance of in-situ walls using the measured data collected from various deep excavation sites in urban area. A variety of in-situ wall systems from 57 sites were considered, including H-pile walls, soil cement walls, cast-in-place pile walls, and diaphram walls. The examination included lateral wall movements as well as apparent earth pressure distributions. The measured data were thoroughly analyzed to investigate the effects of various components of in-situ wall system, such as types of wall and supporting system, on the lateral wall movement as well as on the apparent earth pressure distribution. The results wee then compared with the current design/analysis methods, and information is presented in chart formes to provide tools that can be used for design and analysis. Using the measured data, a semi-empirical equation for predicting deep excavation induced maximum lateral wall movement is suggested.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2015

In this study, laboratory tests (flow, unit weight, unconfined compressive strength and bleeding tests) were performed to evaluate engineering properties of treated soil to improve pipe mixing method. As result, flow and bleeding properties are proportional to the water contents. The unit weight and unconfined compressive strength is decreased as the water contents increased. Comparing equipments contact pressure with bearing capacity of the mixed soil for dozer, backhoe and belt conveyor are immediately appliable. The applicable water content range is estimated from 80% to 200% by pipe mixing method using cement. Also, The design chart is developed from the results.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.197-204
• /
• 2011

In this paper, There is a study of a smartphone-based App for e-learning when the process control of manufacturing. First, That is obtained the control limit lines after inputted by the measured data and able to look up the assignable causes and then can display those causes. A User of this App can access the record about assignable causes using the record menu and can use with an e-Learning tool. Because that were provided in the form of a control process theory and bulletin announcements. Helped to exchange information. In addition, the user's guide how to use this App. The result of this process control is provided by charts. The alarm message to the alertsymbol, depending on the level of color clearly was designed to UI which displays the results. After the questionnaire responses with respect to satisfaction of Utilization and satisfaction of the learning experience. The Utilization' satisfaction results Appeared that 82% of the participants were satisfied. And The learning's satisfaction results Appeared that 90% of the participants were satisfied.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.110-116
• /
• 2003

With the growth of aircraft performance and needs for light aircraft, the problems associated with hail impacts on aircraft during flights and grounding become and important issue. These hail encounters can cause severe damages to aircraft and result in major concerns in safety and cost. Since nearly all external components of the commercial and military aircraft-in particular, the nose section and the leading edge of the wing and tail-are subject to damages, much effort has been put into understanding of this problem. However, most of the previous studies have focused on the composite components and few results have been reported for the metallic components. In this paper, we study the ice impacts on the aluminum component with the finite element analysis method utilizing commercial non-linear dynamics solver LS-DYNA. The results are compared with the experimental data and a simple measure of the ice impact effects is proposed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.235-242
• /
• 2013

In this paper, the system which can translate sign language through motion recognition of Kinect camera system is developed for the communication between hearing-impaired person or language disability, and normal person. The proposed algorithm which can translate sign language is developed by using core function of Kinect, and two ways such as length normalization and elbow normalization are introduced to improve accuracy of translating sign langauge for various sign language users. After that the sign language data is compared by chart in order to know how effective these ways of normalization. The accuracy of this program is demonstrated by entering 10 databases and translating sign languages ranging from simple signs to complex signs. In addition, the reliability of translating sign language is improved by applying this program to people who have various body shapes and fixing measure errors in body shapes.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.131-143
• /
• 2013

There is the difference of criteria to apply guidelines among the project participants and to depend on the purpose of utilizing BIM models, although modeling criteria are basically provided through BIM guidelines. Therefore, it is quite important to check compliance with guidelines to raise quality of the BIM model. But Quality Checking (QC) items and method for BIM model modeled in accordance with guidelines is not provided. This study suggested QC items and Rule Specifications(RS) for automatic QC. First of all, QC items were derived by analyzing domestic BIM guidelines and a process for structuring natural language is conducted by utilizing flowchart and pseudocode. So, by combining them, RS was suggested. Finally, RS-based case study was conducted by implementing automatic QC process with solibri model checker$^{TM}$. This study will contribute to the improvement of design quality and completeness of BIM model including huge data of 3 dimension. Furthermore, it is necessary to develop BIM guidelines according to the use case and to provide detailed process and standard for QC of BIM model.