• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.39-48
• /
• 2023

This study presents the experimental results to measure the adsorption amount of methane gas by coal according to the conditions of a coalbed methane (CBM) reservoir. Adsorbed gas to coal seam particles was measured under reservoir conditions (normal pressure ~ 1,200 psi pressure range, temperature range15 ~ 45℃) using coal samples obtained from random mines in Kalimantan Island, North Indonesia. The obtained amount of absolute adsorbed gas was applied to triangular with linear interpolation to calculate the maximum amount of adsorbed gas according to temperature and pressure change, at which no experiment was performed. As a result, it was revealed that the amount of adsorbed gas to coal particles increased as the pressure increased and temperature decreased, but the increase of the amount of adsorbed gas decreased at more than an appropriate depth(1,000 ft). In the cleat permeability and cleat porosity for each depth of the coal bed considering the effective stress, the cleat permeability was 28.86 ~ 46.81 md, and the cleat porosity was 0.83 ~ 0.98%. This means that the gas productivity varies significantly with the depth because the reduction of the permeability according to the depth in the coal seam is significant. Therefore, a coalbed depth should be considered essential when designing the spacing of production wells in a coalbed methane reservoir in further study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4B
• /
• pp.363-374
• /
• 2008

Intensity-Duration-Frequency (IDF) curve that is essential to calculate rainfall quantiles for designing hydraulic structures in Korea is generally formulated by regression analysis. In this study, IDF curve derived by the cumulative distribution function ("IDF by CDF") of the proper probability distribution function (PDF) of each site is suggested, and the corresponding parameters of IDF curve are computed using genetic algorithm (GA). For this purpose, IDF by CDF and the conventional IDF derived by regression analysis ("IDF by REG") were computed for 22 Korea Meteorological Administration (KMA) rainfall recording sites. Comparisons of RMSE (root mean squared error) and RRMSE (Relative RMSE) of rainfall intensities computed from IDF by CDF and IDF by REG show that IDF by CDF is more accurate than IDF by REG. In order to accommodate the effect of the recent intensive rainfall of Korea, the rainfall intensities computed by the two IDF curves are compared with that by at-site frequency analysis using the rainfall data recorded by 2006, and the result from IDF by CDF show the better performance than that from IDF by REG. As a result, it can be said that the suggested IDF by CDF curve would be the more efficient IDF curve than that computed by regression analysis and could be applied for Korean rainfall data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.543-560
• /
• 2010

Safety-related concrete structures in a nuclear power plant must be protected against the impact of flying objects, referred to in the profession as missiles. In practice, the structural verification is usually carried out by means of empirical formulas, which relate the velocity of the impinging missile to the wall thickness needed to prevent scabbing or perforation. The purpose of this study is to reevaluate the predictability of the local effect prediction formulas for the penetration and scabbing depths and perforation thickness. Therefore, available formulas for predicting the penetration depth, scabbing thickness, and perforation thickness of concrete structures impacted by solid missiles are summarized, reviewed, and compared. A series of impact analyses is performed to predict the local effects of the projectile at impact velocities varing from 95 to 215 m/s. The results obtained from the numerical simulations have been compared with tests that were carried out at Kojima to validate numerical modelling. The simulation results show reasonable agreement with the Kojima test results for the overall impact response of the RC slabs. From these results, it seems that the Degen equation give a very good estimate of perforation thickness against a tornado projectile for test data. Finally, the results obtained from the impact analysis have been compared with Degen formula to determine the perforation thickness of the RC slab.

• Environmental and Resource Economics Review
• /
• v.32 no.4
• /
• pp.217-238
• /
• 2023

Currently, automobile tax in Korea is imposed by multiplying the vehicle's engine displacement by a certain tax rate. However, the need for revision is being raised as it is pointed out that the current system does not reflect the immediate task of reducing greenhouse gas emissions. Accordingly, this study focuses on the positive relationship between engine displacement and CO₂ emissions, and seeks to calculate an appropriate automobile tax rate considering average CO₂ emissions. To this end, first, we estimated the average annual CO₂ emissions (kg/vehicle) for each engine displacement using the average CO₂ emissions for each vehicle displacement as of 2020. Next, multiple scenarios were analyzed considering the standard tax rate at $75 per ton of CO₂ emissions proposed by the IMF (2019). In particular, we compared the case of imposing a uniform carbon tax of $75 and the case of imposing a progressive tax based on CO₂ emissions by displacement. According to the results, it was confirmed that the uniform tax rate proposed by the IMF is difficult to apply to Korea as it is due to the impact of a decrease in tax revenue, and a tax scheme needs to be designed appropriately considering maintenance of tax revenue according to the current automobile tax, greenhouse gas reduction effect, and automobile tax reform trends in developed countries. For example, in the case of the K3 (1,598cc) of Kia Motors, a representative compact car sold in Korea, if we compare the tax burdens for each tax scenario, the tax burden will be about 220,000 KRW under the current system, about 79,000 KRW under the uniform tax rate, about 83,000 KRW under the progressive tax rate, and about 240,000 KRW under the progressive tax rate similar to the UK tax system, respectively. In this way, this study identified the current statuses of automobile registration and tax in Korea, and automobile tax reform trends in major developed countries, and analyzed the impact of automobile tax reform considering engine displacement and CO₂ emissions, focusing on the tax burden of the people.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.125-135
• /
• 2009

Statement of problem: Loosening or fracture of the abutment screw is one of the common problems related to the dental implant. Generally, in order to make the screw joint stable, the preload generated by tightening torque needs to be increased within the elastic limit of the screw. However, additional tensile forces can produce the plastic deformation of abutment screw when functional loads are superimposed on preload stresses, and they can elicit loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum tightening torque that maximizes a fatigue life and simultaneously offer a reasonable degree of protection against loosening. Purpose: The purpose of this study was to present the influence of tightening torque on the implant-abutment screw joint stability with the 3 dimensional finite element analysis. Material and methods: In this study, the finite element model of the implant system with external butt joint connection was designed and verified by comparison with additional theoretical and experimental results. Four different amount of tightening torques(10, 20, 30 and 40 Ncm) and the external loading(250 N, $30^{\circ}$) were applied to the model, and the equivalent stress distributions and the gap distances were calculated according to each tightening torque and the result was analyzed. Results: Within the limitation of this study, the following results were drawn; 1) There was the proportional relation between the tightening torque and the preload. 2) In case of applying only the tightening torque, the maximum stress was found at the screw neck. 3) The maximum stress was also shown at the screw neck under the external loading condition. However in case of applying 10 Ncm tightening torque, it was found at the undersurface of the screw head. 4) The joint opening was observed under the external loading in case of applying 10 Ncm and 20 Ncm of tightening torque. 5) When the tightening torque was applied at 40 Ncm, under the external loading the maximum stress exceeded the allowable stress value of the titanium alloy. Conclusion: Implant abutment screw must have a proper tightening torque that will be able to maintain joint stability of fixture and abutment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.50-66
• /
• 2016

This study attempts to understand and explain how "Directed Attention Restorative Environment (DARE)" is managed and fostered in "Gang-Hak (講學)" and "Yu-Sik (遊息)" spaces both inside and outside of Oksan Seowon Confucian Academy, Gyeongju. Directed Attention is a pivotal element in human information processing so that its restoration is crucial for effective thinking and learning. According to Kaplan & Kaplan's Attention Restoration Theory, an environment, in order to be restorative, should have four elements: 'Being Away,' 'Extent,' 'Fascination,' and 'Compatibility.' We could confirm OkSan Seowon Confucian Academy has an inner logic that integrates two basically different spacial concepts of "Jangsu" and "Yusik" and thus fosters the Attention Restorative Environment. Particularly, the Four Mountains and Five Platforms (四山五臺) surrounding the premises provides an excellent learning environment, and is in itself educational in terms of the Neo-Confucian epistemology with "Attaining Knowledge by way of Positioning Things (格物致知)" as its principle precept, and of its aesthetics with "Connectedness with Nature" as its central tenet. This study attempts to recapture the value of Korea's cultural heritage concerning the Human/Nature relationship; and it may provide useful insights and practical guidelines/grounds in designing today's schools and campuses, where the young people's needs for the Directed Attention- and Attention Restorative- Servicescapes seem to be greater than ever.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.296-305
• /
• 2006

The heterogeneity of crop transpiration is important to clearly understand the microclimate mechanisms and to efficiently handle the water resource in greenhouses. A computational fluid dynamic program (Fluent CFD version 6.2) was developed to study the internal climate and crop transpiration distributions of greenhouses. Additionally, the global solar radiation model and a crop heat exchange model were programmed together. Those models programmed using $C^{++}$ software were connected to the CFD main module using the user define function (UDF) technology. For the developed CFD validity, a field experiment was conducted at a $17{\times}6 m^2$ plastic-covered mechanically ventilated single-span greenhouse located at Pusan in Korea. The CFD internal distributions of air temperature, relative humidity, and air velocity at 1m height were validated against the experimental results. The CFD computed results were in close agreement with the measured distributions of the air temperature, relative humidity, and air velocity along the greenhouse. The averaged errors of their CFD computed results were 2.2%,2.1%, and 7.7%, respectively.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2015

As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.483-490
• /
• 2009

The aims of this study were to evaluate the removal efficiency for various pollutants in urban storm runoff by a filtration device, and to determine design parameters depending on filter media properties. Appropriate selection of filter media will affect the size and life time of the filtration device. Sets of column tests were performed in order to evaluate the removal efficiency by perlite and a synthetic resin. An investigation of surface properties including CEC (cation exchange capacity) and zeta-potential suggested that the perlite had a superior adsorption capability for cationic pollutants. TCODcr and turbidity were analyzed to investigate the removal characteristic of particulate pollutant. In both columns, the particles in the collected storm runoff was almost completely capture with a small EBCT (empty bed contact time) of 2.5 minutes. Complete clogging at the EBCT of 2.5 minutes occurred after 630 minutes in the perlite column and 810 minutes in the resin column. The removal efficiency of TCODcr and turbidity at the EBCT of 2.5 minutes decreased to below 70% due to an wall effect. The removal efficiency for dissolved pollutant (SCODcr) was negligible due to the insufficient contact time for adsorption. The removal of heavy metals (Cu, Zn, Pb) was mostly ascribed to the filtration of particles containing metals, since the relationship between CEC and the removal efficiency was not apparent. The result of this study would be valuable for the application of filtration device to control of urban storm runoff.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.6
• /
• pp.25-38
• /
• 2020

The objective of this study is to propose a direction for creating a memorial park for the 250 students victims of the Sewol ferry disaster. To this end, this study first attempted to understand the matters discussed at various levels to create a memorial park and find a way that the park can be built by gathering opinions from the bereaved families and the victims themselves, as well as local residents, and experts. Workshops, competitions, special lectures, and websites, etc, were analyzed. A social discourse analysis methodology was used for systematic analysis, and the analyzed discourse was categorized into 4 types for assessment, and the functions and roles were subdivided into 15 types. To assess the priorities and the adequacy of the discourse, an analytic hierarchy process (AHP) was used among 30 activists, public servants, and experts. Then, a survey was conducted to analyze the perception of the residents (467 participants including the bereaved families) about the memorial park. Based on the results of the analysis, two directions were set for the memorial park. First, is a memorial park to remember the victims in everyday life. It must be a park with various cultural contents instead of a conventional memorial park that is solemn and grave sharing anguish and sorrow. The memorial park for the Sewol ferry disaster must become a space where visitors can naturally encounter and remember the victims. Second, is a park that serves as a catalyst that brings change and innovation to the community. It must be able to bring change to the community with direct and indirect influence. It must serve as an impetus to bring change and innovation to the community in the mid-to-long-term. Having many visitors may also lead to an economic effect. These visitors may not just stay in the park, but even contribute to revitalizing the local businesses. The purpose of this study is to apply the research findings to guide the International Design Competition scheduled for 2020 and serve to establish guidelines for a continuous park management system.