• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.217-225
• /
• 2010

Most of the steel bridges in Korea are being currently designed by the allowable stress design method that uses the conventional deterministic factors of safety. However the limit state design based on the concept of probability, statistics and reliability engineering is becoming very popular as a global standard deign method, leading the rational and economic bridge design. As part of the fundamental research to establish the load and resistance factor design(LRFD) of steel bridges considering domestic environmental conditions and regional characteristics, an experimental design is conducted by applying AASHTO-LRFD specification especially to a steel closed-box girder, which occupies relatively a large portion of steel bridges in Korea. Throughout the experimental design according to various sectional changes, some of the issues to be considered in the LRFD design of a composite steel closed-box girder bridge are examined. In this process, an Excel-based design verification program is developed for easy computation and prevention of errors. Quantitative reliability levels of the bridge sections designed by LRFD are also estimated using a reliability analysis method, and compared with the target reliability indexes applied in the LRFD design to verify the validity of the procedure and methodology used in this study.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.6
• /
• pp.1593-1600
• /
• 2016

This paper suggests a temperature guidance for requirements which must be addressed in the preparation of specifications for military equipment used in land applications in the Korean peninsula. In general, the equipment should be designed to operate during all but a certain small percentage of the time. Daegu and Yangpyeong are the hottest and coldest regions by month, respectively, based on surface weather observations over 132 regions from 1904 to 2014. The 1-percent high and low temperatures for land environment in the South Korea are $38.7^{\circ}C$, and -$29.0^{\circ}C$, respectively. This paper also presents the temperature values occurring for specified frequencies of occurrence during the most severe month. Diurnal cycles associated with the hottest and coldest top one-percent temperatures, including associated solar radiation, relative humidity, and wind-speed are provided.

• Composites Research
• /
• v.23 no.3
• /
• pp.37-42
• /
• 2010

The fiber material properties, elastic constant and strength, are the most important factors among the various material properties for the design of composite pressure vessel, because of it's dominant influence on the performance of composite pressure vessel. That is, the deformation and burst pressure of pressure vessel highly affected by the fiber material properties. Therefore, the establishment of test method for exact fiber material properties is a priority item to design a composite pressure vessel. However, the fiber material properties in filament wound pressure vessel is very sensitive on various processing variables (equipment, operator and environmental condition etc..) and size effect, so that it isn't possible to measure exact fiber material properties from existing test methods. The hydro-burst test with full scale pressure vessel is a best method to obtain fiber material properties, but it requires a enormous cost. Thus, this paper suggests a newly developed test method, hoop ring test, that is capable of pressure testing with ring specimens extracted from real composite pressure vessel. The fiber material properties from hoop ring test method showed good agreement with the results of hydro-burst test with full scale composite pressure vessels.

• Annual Conference of KIPS
• /
• 2004.10a
• /
• pp.465-468
• /
• 2004

의료기기 산업은 시장규모와 생산규모에서 미국이 전 세계의 $40\%$ 이상을 차지하고 있어 국내외 모든 의료기기 제조업체에서는 미국시장진출을 목표로 꾸준히 노력하고 있는 실정이다. 그러나 의료기기는 인체에 직접 적용된다는 특성으로 인해 각 국가의 정부는 저마다 다른 엄격한 기준으로 자국내 시장진출을 규제하고 있으며 엄격한 관리제도를 유지하고 있다. 국내 최신의 전자 의료기기는 필수적으로 의료기기를 제어하기 위한 의료용 소프트웨어를 필요로 하므로 의료기기 산업의 발전은 의료용 소프트웨어 산업의 발전에 직결된다고 할 수 있다. 그러나 의료기기의 경우에는 인$\cdot$허가를 위한 제도 및 절차가 갖추어져 활용되고 있는 반면, 의료용 소프트웨어의 경우에는 적합한 평가기준이 마련되어 있지 못하여 제도 및 체계구축의 필요성이 대두되고 있다. 본 논문에서는 국제표준(ISO/IEC 12119, ISO/IEC 9126을 바탕으로 평가메트릭을 구축하여 의료용 소프트웨어의 정량적인 품질을 측정, 평가하여 품질측정의 결과를 토대로 품질을 인증하는 의료응용 소프트웨어 시험인증 지원도구를 설계 및 구현하였다.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.1
• /
• pp.35-45
• /
• 2022

When constructing a cylindrical vertical shaft through the open-cut method, the walls are generally designed to be temporary flexible walls that allow a certain level of displacement. The earth pressure applied to the flexible walls acts as an external force and its accurate estimation is essential for reasonable and economical structure design. The earth pressure applied to the flexible wall is closely interrelated to the plastic deformation of the surrounding ground. This study simulated a stepwise excavation for constructing a cylindrical vertical shaft through a centrifugal model test and evaluated the continuous deformation behaviors of the surrounding ground through digital image analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.63-70
• /
• 2004

This paper describes modeling, design and performance test results of infrared thermal image target system which can generate infrared thermal image on aircraft. The system is designed to control image shape and intensity so that the infrared image shape and its emitting intensity are so similar to that of real aircraft. When applying the technique suggested in this paper, the system consumes only small electric power energy about 30(㎾) to generate infrared thermal image which is equivalent to that of real aircraft under full power operation. After verifying performance test, the system developed here has been used as a target for korean potable surface to air missile(KPSAM) at the stage of evaluation test such as target adaptive guidance test and auto-pilot logic test.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.1-5
• /
• 2005

An investigation was made on the fatigue characteristics of type 304 stainless steel membrane manufactured by plastic working. To investigate the effect of plastic deformation, tests were performed with 5 types of specimens having different amount of plastic deformation. Fatigue tests were executed under both room and LNG temperatures $(-162^{\circ}C)$. All the test results were compared with the fatigue data provided by RPIS (Recommended Practice for Inground LNG Storage Tank). On the basis of these results, it was confirmed that RPIS's design fatigue curve could be applied to evaluate fatigue life of KOGAS membrane manufactured by pressing.

• Composites Research
• /
• v.14 no.3
• /
• pp.10-17
• /
• 2001

A reseach was peformed to develop composite pressure vessels in conjunction with design, fabrication, and test. Fiber pattern and angels were decided by CADFIL software and they were [$liner/15^{\circ}/15^{\circ}/90^{\circ}/18^{\circ}/90^{\circ}/21^{\circ}/21^{\circ}/90^{\circ}$]. Fabrication of bottles were done by 5-axis filament winding machine. During fabrication fiber optic sensors were embedded to measure the strain at points when internal pressure was applied by water pump. Conventional strain gage instrumentation showed the stable test results. The test results were compared to finite element analysis results and they were close each other in strain values. One can see the successful design and fabrication of single boss composite vessels.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.111-121
• /
• 2005

A 100kW class gas turbine combustor was developed and tested for PPU(Primary Power Unit) of ground vehicle. The combustor which employed annular-reverse type and pressure swirl atomizer was designed through 1-D analysis, 3-D thermal flow analysis and combustor performance was experimentally investigated on the combustor test rig. The test result was satisfactory. The developed combustor was also tested for environmental and endurance specification under engine adopted conditions and the application of a state-of-the-art gas turbine combustor to ground vehicle PPU turned out to be successful.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.58-64
• /
• 2001

This paper is described about design and manufacture of the LVI tester and the model transformer. And we develope the analysis technology of the LVI test with using the developed LVI tester and the model transformer. The LVI tester is consisted of a main body, terminal boxes and cables. It is estimated that the tester has output characteristic to match ANSI specification. The winding deformation models are made of model transformer having tapes and we discuss about the analysis technology of LVI test using the tester and the model transformer.