• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.634-643
• /
• 2010

In this study, both an experimental test and a time history analysis with 3D modeling were performed to verify the structural analysis model in a 2-span two girder bridge of high speed railway, which was under constructed according to the ballast load of track structure. In the basis of the structural analysis model, the analysis of construction step was carried out to investigate the reduction effect of moment in middle support of the bridge which has initial prestressing force according to camber control. The initial prestressing force of proper level was calculated, and then the reduction of moment for economical bridge section was studied. Finally, a bridge analysis method was presented for an economical and efficient design in steel composite bridge.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.1-11
• /
• 1999

Thermal behavior of spacecraft propulsion system utilizing monopropellant hydrazine ($N_2$$H_4$) is addressed in this paper. Thermal control performance to prevent propellant freezing in spacecraft-operational orbit was test-verified under simulated on-orbit environment. The on-orbit environment was thermally achieved in space-simulation chamber and by the absorbed-heat flux method that implements an artificial heating through to the spacecraft bus panels enclosing the propulsion system. Test results obtained in terms of temperature history of propulsion components are presented and reduced into duty cycles of the avionics heaters which are dedicated to thermal control of those components. The duty cycles are subsequently converted into the electrical power required in the operational orbit. Additionally, cyclic temperature of each component, which was made under thermal-balanced condition of spacecraft, is compared to the acceptable design range and justified from the viewpoint of system verification.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.25-50
• /
• 2014

In order to identify a load transfer mechanism of ground anchors, the behavior of multi load transfer ground anchor systems was investigated and compared with those of compression type anchors and tension type anchors. Large scale model tests were performed and stress-strain relationships were obtained. The load transfer mechanism of ground anchors was also investigated in the field tests. Finally, numerical analyses to predict the load-displacement relationships of anchors were conducted. It is concluded that the load transfer characteristics of MLT anchors are mechanically much more superior in the pull-out resistance effect than those of existing compression and tension type anchors. From the results of research work, we could suggest that the max pull-out capacity of anchor capacity to each the soil condition. Also, the MLT anchors can be used to achieve both structural enhancement and economic construction in earth retaining or supporting structures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1055-1062
• /
• 2015

A GPS based wave height meter system is proposed in this paper. The proposed system uses a dual-frequency measurements, a precise GPS satellite information and a PPP-based navigation algorithm to estimate the position with high accuracy. This method does not need to receive corrections from the reference stations. Therefore, unlike RTK based wave meter, regardless of the distance to the reference stations, it is possible to estimate position with high accuracy. This system is very simple and accurate system, but accelerometer-based system requires the other sensors such as GPS. Because position error is accumulated in the accelerometer system and must be removed periodically for high accuracy. In order to get the measurements and test the proposed wave height meter system, a buoy equipped with the test platform is installed on the sea near by Jukbyeon habor in Uljin, Korea. Then, to evaluate the performance, compares built-in commercial wave height meter with proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1169-1175
• /
• 1993

Plasma spraying method was used to fabricated the microwave absorbing ferrite-silicon carbide on the aluminum-alloy of the fuselage of an aircraft to protect it from RADAR detection. In this paper 15[rm] instead of 34[rm], the mean size of SIC-powder for ferrite-silicon carbide surface films(I) was used. 50(Kg/h) Instead of 70(Kg/h), the powder feed and 100[mm] Instead of 80(mm), spray distance of spray parameters was used. This M/W absorbers were designed experimentally and fabricated trially, as a result of which the relative frequency bandwidth of 2.8% were obtained under the tolerance limits of the reflection coefficients lower than-10[dB], and the maximum absorption thickness becomes 0.5[mm], which is much thinner than that of the conventional ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.771-776
• /
• 2010

In this paper, we present an efficient centralized dynamic bandwidth allocation scheme with multicasting for asymmetric 10G-Ethernet Passive Optical Networks (10G-EPONs). The proposed scheme is based on multicast-burst polling and provides quality of service (QoS) with class of service (CoS) to different lasses of packets. It is shown that a well-known conventional interleaved polling scheme severely decreases downstream channel capacity for user traffic when the upstream network load is low (avalanche gate frequency). To overcome this problem, we have proposed a multicast burst polling scheme which shows impressively lower downstream bandwidth consumption compare to IPACT and moreover it did not show the light load penalty problem. Simulation results using an OPNET tool show that the multicast burst polling effectively eliminates light-load penalty and minimizes downstream bandwidth consumption under avalanche gate frequencies.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.1-12
• /
• 2004

This study evaluated the asphalt binder characteristics for the hot-recycled asphalt mixture in which RAP was added in ambient temperature for surface course as well as for base course. RAPs were collected from four sources and their physical properties were evaluated. Mix designs were performed using 10 and 20% RAP contents for surface courses and 10, 20 and 30% for base courses. A virgin asphalt with the penetration grade of 60-80 was used for mixing recycled mixtures. Physical properties of recycled binders, including penetration, absolute viscosity, GPC, BBR and penetration after TFO were measured. From the results, regression analysis of absolute viscosity versus LMS in GPC showed $R^2$ being over 0.95, showing that GPC results estimate the absolute viscosity with relative accuracy. In BBR test, the resistance of recycled mixtures at low service temperature was inferior to the control, because the low temperature PG of recycled binder was one grade higher than that of the control binder.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.158-161
• /
• 2017

In this paper, we propose Total RMS(Radiation Monitoring System) for nuclear and nuclear medicine. The proposed system can expand and control Stack Monitor, Area Monitor, and Water(Liquid) Monitor into one system, and can monitor the signals measured by each radiation detector in an integrated manner. The proposed system consists of a sensor module that detects the radiation, a display unit that displays the radiation dose near the radiation detection location, an alarm unit that reports the alarm when the detected radiation dose reaches the danger level, A Main Hub for collecting and storing the contents to the remote monitoring system, and an RMS Monitoring Unit for clearly displaying the measured radiation dose at the remote site. In order to evaluate the performance of Total RMS for the proposed nuclear and nuclear medicine field, it is confirmed that the measurement uncertainty is less than 8.5% and it operates normally within ${\pm}15%$ of the international standard.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.97-105
• /
• 2019

With the possibility of wireless control of the aircraft by Nicola Tesla, Unmanned Aerial Vehicle(UAV) was mainly used for military and defense purposes with the rapid development through World War I and II. As civilian applications of unmanned aerial vehicles have expanded, they have been used with various services, and attempts have been made to control various environmental changes and risk factors of unmanned aerial vehicles. However, GPS spoofing, Jamming attack and security accidents are occurring due to the communication in the unmaned aerial vehicle system or the security vulnerability of the unmanned aerial vehicle itself. In order to secure introduction of Unmanned aerial vehicle, South Korea has established Unmanned Aerial Vehicle verification system called Airworthiness Certification. However, the existing cerfication system is more focused on test flight, design and structure's safety and reliability. In this paper, we propose a unmanned aerial vehicle system model and propose security functional requirements on unmanned aerial vehicle system in the corresponding system model for secure-introduction of Unmanned Aerial Vehicle. We suggest the development direction of verification technology. From this proposal, future development directions of evaluation and verification technology of Unmanned Aerial Vehicle will be presented.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.4
• /
• pp.181-189
• /
• 1996

It is well-known that the hearing strength in vertical joints of precast concrete large panel system is affected by grout compressive strength angle of shear key and bearing area. 21 vertical joint specimens were tested to investigate the effects of these parameters The analysis of test results shows that : 1. The higher be grout compressive strength, the higher will shear strength be. And the bearing strength does not so increase in proportion of bearing area. 2. The shear key with the angle of $20^{\circ}$shows the highest bearing strength among three angle variables of $20^{\circ}$, $25^{\circ}$, $30^{\circ}$.