• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.71-78
• /
• 2012

The digital tachograph is a device that automatically records speed and distance of a vehicle, together with the driver's activity and vehicle status at an accident. It records vehicle speed, break status, acceleration, engine RPM, longitude and latitude of GPS, accumulated distance, and so on. European Commission regulation made digital tachographs mandatory for all trucks from 2005. Republic of Korea made digital tachographs mandatory for all new business vehicles from 2011 and is widening the range of vehicles that must install digital tachographs year by year. This device is used to analyze driver's daily driving information and car accidents. Under a car accident that makes the device reliability unpredictable, it is very important to store driving information with maximum reliability for its original mission. We designed and implemented a practical digital tachograph. This paper presents a storage scheme that consists of a first storage device with small capacity at a high reliability and a second storage device with large capacity at a low cost in order to reliably records data with a hardware at a low cost. The first storage device records data in a SLC NAND flash memory in a log-structured style. We present a reverse partial scan that overcomes the slow scan time of log-structured storages at the boot stage. The scheme reduced the scan time of the first storage device by 1/50. In addition, our design includes a scheme that fast stores data at a moment of accident by 1/20 of data transfer time of a normal method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2368-2374
• /
• 2013

Elevator power consists of power consumption in stand-by and in service. This paper designed a fuzzy controller saving stand-by power of elevators in a way that calculates the adequate number of elevators by the variable traffic volume of passenger and then powers off elevators being out of service. Also, the fuzzy controller was designed to minimize a increase of the average passenger's waiting time by the limited number of elevators in service. When the fuzzy controller designed in this paper was applied to the group elevator experimental device, The passenger's waiting time increased approximately 7.5%~9.5%, While the stand-by power saving is expected to be about 675KWh a day per unit and about 236.6KWh a year per unit.

• Journal of Korean Society of Transportation
• /
• v.25 no.2 s.95
• /
• pp.51-61
• /
• 2007

Increasing traffic volumes and excessively high speeds on national highways through small towns often increases the frequency of accidents. Extensive paved areas, narrow sidewalks, median barriers and little greenery have resulted in a dangerous and destructive living environment for residents. The reason for this problem is that throughways were expanded without considering the harmony between the throughways and the small towns. Construction of bypasses and reclassification of highway functions would solve the problem by reducing vehicle speeds in small towns, but this method is too costly and time consuming. Therefore, this study analyzes national highways through small towns as a case studies using positive guidance in order to improve safety and develop alternatives. As a result of the case study, the biggest problem was observed to be the excessively high vehicle speeds, This study also identified places were information should be given or posted but is currently absent. Therefore, this study concludes that notional highways through small towns need installation of speed reduction facilities and additional information provision to drivers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.103-103
• /
• 2016

최근 기후변화에 따른 집중호우로 도시홍수의 피해가 급격히 증가하고 있다. 특히 인구가 밀집하고 교통량이 많은 대도시의 경우 동일한 호우에 대하여 녹지나 농경지 등에 비해 그 피해가 더 심각하다. 일반적으로 홍수 피해의 직접원인은 외수로 인한 피해와 내수로 인한 피해로 크게 구분할 수 있다. 외수피해는 주로 소하천 및 지천의 범람, 제방의 붕괴 등으로 발생한 것이며 내수피해는 배수로, 하수도 및 펌프장의 내수배제능력 부족이 주된 원인이다. 따라서 도시홍수를 효과적으로 방어하기 위해서는 우선적으로 내배수시설의 성능개선이 선행되어야 할 필요가 있다. 이러한 내배수 시설의 성능 개선을 위해서는 현재 기 설치되어 있는 빗물펌프장의 설계 및 내배수 효율에 대한 성능평가가 필요하다. 하지만 현재 국내 펌프설계기준에는 빗물펌프장의 설계 및 운영에 대한 구체적인 성능 평가 방법이 제시되어 있지 않은 실정이다. 만약, 펌프 흡입수조 및 흡입파이프의 형상이 적절하게 설계되지 못한다면 물이 파이프 입구로 부드럽게 흡입되지 못하고 볼텍스 및 스월이 발생하게 된다. 이러한 볼텍스 및 스월은 펌프 입구 쪽으로 물 뿐 아니라 공기를 함께 흡입시킴으로써 펌프의 효율저하, 소음, 진동을 발생시키며 펌프 파손의 원인이 될 수 있다. 따라서 펌프를 설치하기 전 펌프 설치 후에 발생되는 펌프 흡입부 주변의 흐름특성 변화 및 흐름특성이 구조물에 미치는 영향 등을 고려하기 위하여 수리모형실험이 필요한데, 수리모형실험은 많은 시간과 비용이 들어가기 때문에 이를 대체할 수 있는 방안이 요구된다. 그런 이유로 최근에는 수리모형실험 대신 수치모의를 이용하는 경우가 많다. 수치모의의 결과는 수리실험의 결과와 비교, 검증을 거쳐 신뢰성을 얻는다. 본 연구에서는, 3차원 수치모형의 다양한 난류모델을 이용하여 흡입파이프로 물이 유입될 때 흡입부 내, 외의 수심 별 유속 변화를 분석하고, 그 결과를 이용하여 FLOW 3D 모형의 검증을 수행하였다.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.2
• /
• pp.107-118
• /
• 2018

Due to the rapid economic development, traffic congestion has become a dire concern in Beijing, China. Levying a congestion toll is seen as the most effective solution to the problem. Building a congestion pricing model is a crucial step in implementing a workable toll scheme. Unlike previous attempts, this study not only covers the theoretical discussion but also considers three practical issues: the speed-density relationship, the value of travel time savings, and the determination of optimal traffic volume. We estimate the speed-density relationship by regression models and the value of travel time saved through survey results. We further suggest a way through which the government could identify the optimal traffic flow by a series of trial-and-errors, without the knowledge of exact road demand structure. Finally, a practical tolling scheme is proposed for Beijing's second ring road along with some policy recommendations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.632-637
• /
• 2016

A streetlight control system was developed using information technology and LED lights for efficient management and energy savings. The proposed system can control the power usage of an LED streetlight luminaire using GPS satellite communication and an Arduino with a built-in microprocessor. A control circuit was designed to control the current using GPS, a control unit, transistor, resistor, and constant-current supply circuit. The circuit was validated through experiments with normal operation. Using GPS, the control system extracts accurate time and location information according to the season, and it controls the current supplied to the LED streetlight according to the extracted time. Power consumption was reduced by more than 11%. The control system could reduce accidents caused by conventional lighting systems used to save energy, and it could improve the inefficient management of energy by preserving constant brightness of a streetlight at times and in areas that have less traffic.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.111-121
• /
• 2011

This paper discusses a method for optimizing the semi-actuated traffic signal control system by adjusting the initial interval according to the number of vehicles waiting for the green light in the actuated phase. We also present a Left-Turn actuated traffic signal control strategy that examines the vehicular noise in the detection area and determines the phase extension and the gap-out. In order to detect the vehicles in real-time, an image detector's Video Image Tracking technology was adopted. A 'Zone in Zone'method was implemented, and the image detection area is segmented into three zones: 1) Zone1 for verifying a vehicles obligatory presence, 2) Zone2 for counting the standby vehicles, and 3) Zone3 for examining the number of vehicles that have passed. The on-site assessment of the Left Turn Actuated Control is carried out using CORSIM, and the results show that the Control Delay decreased by 23.10%, 15.06%, and 4.34% compared to the delays resulted from pre-timed control, semi-actuated control-1 and semi-actuated control-2 traffic signal control systems respectively. The Queue Time also decreased by 36.24%, 20.10% and the Total Time by 14.36%, 7.02% for the same scenario. Which clearly demonstrates the operational efficiency. A sensitivity analysis reveals that the improvement from the propose traffic control strategy tends to increase as the through traffic volume reaches a saturated condition and the left-turn traffic volume decreases.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.227-241
• /
• 2005

This paper presents a practical and realistic Life-Cycle Cost (LCC) optimum design methodology for steel bridges considering the long-term effect of environmental stressors such as corrosion and heavy truck traffics on bridge reliability. The LCC functions considered in the LCC optimization consist of initial cost, expected life-cycle maintenance cost, and expected life-cycle rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socio-economic losses. For the assessment of the life-cycle rehabilitation costs, the annual probability of failure, which depends upon the prior and updated load and resistance histories, should be accounted for. For the purpose, Nowak live load model and a modified corrosion propagation model, which takes into consideration corrosion initiation, corrosion rate, and repainting effect, are adopted in this study. The proposed methodology is applied to the LCC optimum design problem of an actual steel box girder bridge with 3 continuous spans (40m+50m+40m=130m). Various sensitivity analyses are performed to investigate the effects of various design parameters and conditions on the LCC-effectiveness. From the numerical investigation, it has been observed that local corrosion environments and the volume of truck traffic significantly influence the LCC-effective optimum design of steel bridges. Thus, these conditions should be considered as crucial parameters for the optimum LCC-effective design.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Recently, traffic congestion has become serious due to increase of private car usages. Carsharing or other innovative public transportation systems were developed to alleviate traffic congestion and carbon emissions. These measures can make the traffic environment more comfortable, and efficient. Cloud Transportation System (CTS) is a recent carsharing model. User can rent an electronic vehicles with various traffic information through the CTS. In this study, a concept, vision and scenarios of CTS are introduced. And, authors analyzed the location of CTS rental stations and estimated CTS demands. Firstly, we analyze the number of the population, employees, students and traffic volume in study areas. Secondly, the frequency and utilization time are examined. Demand for CTS in each traffic zone was estimated. Lastly, the CTS rental station location is determined based on the analyzed data of the study areas. Evaluation standard of the determined location includes accessibility and density of population. And, the number of vehicles and that of parking zone at the rental station are estimated. The result suggests that Haewoondae Square parking lot would be assigned 11 vehicles and 14.23 parking spaces and that Dongbac parking lot be assigned 7.9 vehicles and 10.29 parking spaces. Further study requires additional real-time data for CTS to increase accuracy of the demand estimation. And network design would be developed for redistribution of vehicles.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1913-1926
• /
• 2007

Number of highway lanes and level of service are based on the 30th, 60th or 100th highest hour volume of the target year. On the other hand, railroad design volume is generally expressed in average annual daily traffic (AADT). This procedure ignores attributes of railroad demand's concentration on peak days and hours. Actual data analysis represents railroad's peaking characteristics very similar to those of highways. Therefore it is necessary to set a procedure in selecting design volume for railroad planning. This study presents a concept and the calculating procedure for railroad design hourly volume to analyze effect of railroad investment.