• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.127-127
• /
• 2022

1998년부터 운영 중인 보령댐은 충남 서부 8개 시군의 용수공급을 담당하고 있다. 그러나 보령댐의 용수수요는 지속적으로 늘어나 2015년 댐 용수공급능력의 92%에서 2022년에는 댐 용수공급능력의 98%로 늘어났으며, 최근 유입량은 2013년~2017년 및 2019년 평균유입량은 설계유입량의 58%에 불과한데다, 연속으로 적은 유입량이 기록되는 등 예전보다 가뭄에 취약해진 상황이다. 2015년에 가뭄에 대한 대응방식으로써 댐 용수공급조정기준이 마련되었는데, 이는 가뭄대응단계별 기준저수량을 도입하고, 각 대응단계별로 용수공급량을 조정하는 기준을 제시하고 있다. 이를 통해 보령댐 또한 '주의'단계에서 하천유지용수를 감량하고 있으며, '경계'단계에서는 농업용수감량과 더불어 보령댐도수로를 가동하는 것까지 시행하여 가뭄에 대응 중이다. 보령댐도수로의 시설용량은 2022년 용수수요의 40%인데, 보령댐 가뭄시 저수량 확보에 큰 역할을 하고 있다. 보령댐도수로는 '16년부터 매년 운영하고 있다. 그럼에도 불구하고 보령댐은 반복된 유입량 부족으로 댐의 상시만수위까지 물을 채우지 못한채로 다음해를 맞이하게 되는 상황이 생겨 보령댐도수로를 보다 적극적으로 활용하는 방안이 필요하게 되었다. 이에 따라 '21년 12월 보령댐도수로 운영기준은 '경계'단계 저수량 미만에서 가동하는 것에서 '관심'단계 저수량 미만에서 가동하는 것으로 변경되었다. 2022년 현재의 용수수요로 기존 보령댐도수로 운영기준을 적용했을 경우와 개정 보령댐도수로 운영기준을 적용했을 경우를 비교하면, 전체 평가대상기간 8,401일(23년)중 가뭄대응기간은 도수로가 없을 경우는 3,419일, 기존 도수로 운영기준 적용시 3,005일, 개정 도수로 운영기준 적용시2,450일로 가뭄대응기간의 개선효과가 12%에서 28%로 향상되었다. 하천유지용수 감량기간은 도수로가 없을 경우는 3,299일, 기존 도수로 운영기준 적용시 2,615일, 개정 도수로 운영기준 적용시1,718일로 하천유지용수 감량기간의 개선효과가 21%에서 48%로 향상되었다. 또한 농업용수의 감량기간은 도수로가 없을 경우는 1,177일, 기존 도수로 운영기준 적용시 627일, 개정 도수로 운영기준 적용시 91일로 농업용수 감량기간의 개선효과가 47%에서 92%로 향상되었다. 그리고 생공용수의 감량기간을 비교해보면 도수로가 없을 경우는 1,714일, 기존 도수로 운영기준 적용시 332일, 개정 도수로 운영기준 적용시 0일로 생공용수 감량기간의 개선효과가 81%에서 100%로 대폭 향상되었다. 즉 보령댐 도수로 운영기준의 개정으로 보령댐은 가뭄시 보다 적극적인 대응이 가능하게 되었으며, 하천유지용수, 농업용수 및 생공용수의 공급이 보다 원활해지게 된 것이다.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.537-544
• /
• 2005

For the proper management of high pressurized gas storage caverns, analysis of groundwater flow field and inflow quantity according to the groundwater head, gas storage pressure and water curtain head should be performed. The finite element method has been widely used for the groundwater flow analysis surrounding underground storage cavern because it can reflect the exact shape of cavern. But the various simulations according to the change of design factors such as the width of water curtain, shape of cavern etc. are not easy when elements were set up. To overcome these limitations, two dimensional groundwater flow model is established based on the boundary element method which compute the unknown variable by using only the boundary shape and condition. For the exact computation of drainage rate into cavern, the model test is performed by using the exact solution and pre-developed finite element model. The test result shows that the model could be used as an alternative to finite element model when various flow simulations are needed to determine the optimizing cavern shape and arrangement of water curtain holes and so forth.

• The Journal of the Korea Contents Association
• /
• v.15 no.9
• /
• pp.403-410
• /
• 2015

Since 1970, MRI has greatly been developing in terms of strength of magnetic field, the number of receipt channels, and short time of examination. With the development of digital systems and wireless network, hospitals have also acquired, saved, and managed digital images taken by various kinds of medical imaging equipment. However, domestic universities fail to provide practice training course independently thanks to expensive practice equipment and high maintenance cost, and rely on clinical training. Therefore, this study developed a MR patient diagnosis program based on Windows PC to help out students before their working in clinical filed. The designed Relational Database of MRI Simulator is made up of seven tables according to functions and data characteristics. Regarding the designed patient information, each stepwise function was classified by the patient registration method in clinical field. In addition, on the assumption of the basic information for diagnosis, each setting and content were classified. The menu by execution step was arrayed on the left side for easy view. For patient registration, a patient's name, gender, unique ID, birth date, weight, and other types of basic information were entered, and the patient's posture and diagnosis direction were set up. In addition, the body regions for diagnosis and Pulse Sequence were listed for selection. Also, Protocol name and other additional factors were allowed to be entered. The final window was designed to check diagnosis images, patient information, and diagnosis conditions. By learning how to enter patient information and change diagnosis conditions in this program, users will be able to understand more theories and terms learned in practice and thereby to shorten their learning time in actual clinical work.

• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.412-428
• /
• 2012

To achieve mine development, a large amount of data concerned with the geological structure and the ore body had to be investigated and collected through geological survey, drilling and geophysical explorations. In most previous cases, however, the data were usually analyzed two dimensionally and those results showed some limits because of their 2D presentation. Those 2D maps such as geological plane sections or longitudinal sections cause lots of difficulties in understanding the complex geological structure or the feature of ore body in a spatial way. In this study, research area was set on the abandoned Yangyang iron mine in Korea and the Sugaeng ore body within the mine was selected as the research target to design a mine haulage system for reopening. A 3D mine model of this area was tried to be constructed using a 3D modelling software, GEMS. An accurate 3D model including the ore body, the geological structure, the old underground mine drifts and the new mine drifts was constructed under the purpose of reopening of the abandoned iron mine. Especially, mine design for trackless haulage system was conducted. New inclines and drifts were planned and modelled 3 dimensionally considering the utilization of old drifts and shaft. In addition to the 3D modelling, geostatistical technique was adopted to generate a spatial distribution of the ore grade and the rock physical properties. 3D model would be able to contribute in solving problems such as evaluating ore reserves, planning the mine development and additional explorations and changing the development plans, etc.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.417-428
• /
• 2005

Today, IT organizations perform projects with vision related to marketing and financial profit. The objective of realizing the vision is to improve the project performing ability in terms of QCD. Organizations have made a lot of efforts to achieve this objective through process improvement. Large companies such as IBM, Ford, and GE have made over $80\%$ of success through business process re-engineering using information technology instead of business improvement effect by computers. It is important to collect, analyze and manage the data on performed projects to achieve the objective, but quantitative measurement is difficult as software is invisible and the effect and efficiency caused by process change are not visibly identified. Therefore, it is not easy to extract the strategy of improvement. This paper measures and analyzes the project performance, focusing on organizations' external effectiveness and internal efficiency (Qualify, Delivery, Cycle time, and Waste). Based on the measured project performance scores, an OT (Opportunity Tree) model was designed for optimizing the project performance. The process of design is as follows. First, meta data are derived from projects and analyzed by quantitative GQM(Goal-Question-Metric) questionnaire. Then, the project performance model is designed with the data obtained from the quantitative GQM questionnaire and organization's performance score for each area is calculated. The value is revised by integrating the measured scores by area vision weights from all stakeholders (CEO, middle-class managers, developer, investor, and custom). Through this, routes for improvement are presented and an optimized improvement method is suggested. Existing methods to improve software process have been highly effective in division of processes' but somewhat unsatisfactory in structural function to develop and systemically manage strategies by applying the processes to Projects. The proposed OT model provides a solution to this problem. The OT model is useful to provide an optimal improvement method in line with organization's goals and can reduce risks which may occur in the course of improving process if it is applied with proposed methods. In addition, satisfaction about the improvement strategy can be improved by obtaining input about vision weight from all stakeholders through the qualitative questionnaire and by reflecting it to the calculation. The OT is also useful to optimize the expansion of market and financial performance by controlling the ability of Quality, Delivery, Cycle time, and Waste.

• Journal of Korea Multimedia Society
• /
• v.2 no.3
• /
• pp.277-288
• /
• 1999

A distributed multimedia school system is developed for the multimedia classroom at high school and university. The system is designed and implemented for students to improve the learning efficiency through the personalized multimedia contents and pace of learning. The previously developed multimedia information retrieval systems have some limitations on being applied to the multimedia classroom: expensive cost per stream or poor retrieval quality inappropriate for education, unscalability of system and service, unfamiliar proprietary client environment, and difficulty for teachers to use the authoring tools and manage the authored teaching materials. The system we developed overcomes the above problems. It is so scalable as to be applicable not only to a segmented classroom but also to the world wide Internet. The stream server is one of the components of the system: stream servers clients, a service gateway system, and a authoring management system. This paper describes the design and implementation of the stream server. A single stream server can simultaneously playback the multimedia streams as many as clients at one classroom. This is achieved only by the software engine without any changes of the hardware architecture. The systematic coupling with other components gives the scalability of the system and the flexibility of services.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.514-516
• /
• 2004

위성의 개발을 위해서는 오랜 개발기간과 많은 예산, 축적된 기술이 요구된다. 또한 위성에는 다양한 분야의 기술이 사용되어지기 때문에 각 서브시스템마다 독자적인 개발환경을 구축할 필요가 있다. 특히 위성의 찌어. 임무수행 및 지상과의 통신 등을 담당하는 탑재소프트웨어는 위성의 용도 및 목적에 따라 개발환경이 크게 달라진다. 실시간 운영체제는 무엇을 사용하는지, 개발 및 검증을 위한 도구로 어떤 프로그램을 사용하는지, 내외부의 인터페이스는 어떠한 방식으로 수행할지, 새로운 기능의 CPU나 하드웨어에 대한 제어 등 위성의 탑재소프트웨어를 개발하기 위해서는 많은 검토 항목들이 고려되어야 한다. 새로운 위성을 개발할 경우 신기술의 적용과 새로운 시스템위성시스템의 검증 및 개발을 위한 개발검증장비가 요if되며, 위성시스템의 변경 때마다 개발검증장비를 새로이 구축하게 되면 많은 기간과 막대한 비용이 위성개발 시마다 소요된다. 위성선진국에서는 다양한 위성의 개발 시 비용절감 및 개발기간 단축을 위하여 범용위성용 개발검증장비를 개발하여 이용하고 있는 추세이다. 국내에서는 다목적실용위성 1호가 발사되어 성공적으로 임무를 수행하고 있으며 다목 실용위성 2호가 개발되어 현재 통합 및 조립시험이 진행 중이다. 그러나 새로운 위성시스템의 사전 검증 및 신기술의 적용을 위한 범용위성 시스템 테스트베드에 대한 기술은 미비한 실정이다. 이러한 범용위성용 개발검증장비의 기반기술을 확보하기 위하며 현재 위성전자전산시스템 개발검증장비에 대한 연구가 수행되고 있다. 본 논문에서는 현재 수행되고 있는 PowerPC를 이용한 위성 탑재소프트웨어 개발검증시스템의 설계 및 개발현황에 대하여 소개한다.이스는 실험정보가 저장된 데이터베이스, 분석결과가 저장된 데이터베이스, 그리고 유전자 정보 탐색을 위한 데이터베이스로 분류해 데이터를 효율적으로 관리할 수 있게 하였다. 본 시스템은 LiNUX를 운영체계로 하고 데이터베이스는 MYSQL로 하여 JSP, Perl. 통계처리 언어인 R로 구현되었다.프트웨어를 사용하지 않고도 국내의 순수 솔루션인 리눅스 기반의 LonWare 3.0 다중 바인딩 기능을 통해 저 비용으로 홈 네트워크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.368-374
• /
• 2020

Journaling file systems (JFS) manage changes of file systems not yet committed in a data structure known as a journal to restore the file system in the event of an unexpected failure. Extra write operations required for journaling negatively affect the performance of JFS. The high-performance and byte-addressable non-volatile memory (NVM) was expected to easily mitigate these performance problems by providing NVM space as journal storage. However, even with such non-volatile memory technologies, performance problems still arise due to scalability problems inherent in processing transactions of JFS. To solve this problem, we proposes a technique for processing file system transactions for scalable performance. To this end, lock-free data structures are used and multiple I/O requests are allowed to simultaneously be processed on high-performance storage devices with multiple I/O channels. We evaluate the file system with the proposed technique by comparing the original ext4 file system and the recent proposed NVM-based journaling file system on a multi-core server, and experimental results show that our file system has better performance (up-to 2.9/2.3 times) than the original ext4 file system and the recent NVM-based journaling file system, respectively.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.225-234
• /
• 2014

Because of their nature as public facilities, demands that former military facilities be utilized for the public welfare are increasing, thereby leading to an increase in cases in which these military facilities are reestablished as parks. Cases in which former military bases were reestablished as public parks were analyzed; as a result, several implications were derived. First, the objectives of public park projects should be examined from the perspective of the concept of urban regeneration and regional revitalization. Moreover, it is necessary that profits are yielded and that regional identity and history are reproduced through reusing existing facilities as much as possible rather than entirely remodeling former military sites. As parks become larger in size, bases should be reorganized into complexes rather than single facilities or programs. It is also necessary that parks be established in stages considering the enormous expenses required for building public parks. Consequently, because the special characteristics of military facilities can lead to insufficient on-site investigation in the process of establishing parks, thereby incurring a vast amount of costs for design adjustment and contamination disposal, this should be considered in advance. A method of delegating the development rights to partial sites to private businesses and supplementing the costs of park establishment and maintenance with development benefits should be examined. In addition, given that there are various interests and stakes in former military bases, a method of operating a public-private cooperative decision-making organization during project execution should be considered. Finally, policies related to urban parks need to be improved in order to raise funds, expand profitable businesses, facilitate social services and sponsorship, and encourage the participation of trusts and non-profit organizations in park operation and management.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.124-135
• /
• 2015

As many countries have been raising awareness of environmental issues, greater efforts for eco-friendly construction have been made in both governmental and private sectors. However, assessment circumstances for building energy performance and green building standard of legislation are still based on two dimension and handwork. This takes time, cost and labor, and makes assessment inaccurate and inefficient. Therefore, this study suggests methods to improve eco-friendly construction permission process and to automatize open BIM-based assessment of Energy Performance Index (EPI) among several eco-friendly construction certification standards. First, it analyzes the relations between assessment criteria and IFC data, and provides solutions to problems and limitations. Second, it applies the solutions to assessment program in order to automatize open BIM-based assessment for EPI. The eco-friendly construction permission process with these solutions applied will reduce time, cost, and labor by simplifying and automatizing the tasks. Also, the simplified process of design revision will improve not only productivity and efficiency but also accuracy and reliability.