• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.437-451
• /
• 2019

Purpose: The purpose of this study is to improve the quality of the PGM system by improving the structure and production process of slip-ring rotary joint for radar. Methods: The improvement measures for each cause are established through failure analysis of broken items. Specifically, changing in the housing to improve the heating system. Changing the transportation method to prevent damage to equipment during transport. Changing work process of the attenuator ring to prevent damage. etc. Results: The results of this study are as follows; improving the heating system reduces heat generated by the attenuator by about 7 degrees and obtain additional temperature margins. Reduction of defect rate because of adding X-band rotary joint run-out measurement test, ESS of slip-ring rotary joint and Transportation improvement(reinforced flight boxes, tube protection, etc). Getting stable VSWR values by improving work process of attenuator overheating due to a bad bonding process. Conclusion: Through this study, improvements were made to slip-ring rotary joint that failed repeatedly for various reasons. As a result of the application of the improvements, the same fault does not occur until now, so we can see that the quality of PGM has improved.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.101-110
• /
• 2021

The Weapon Control Software performs the function of supporting weapon operation within the Naval Combat System in connection with the Weapon System. As Weapon Control Software depends on an Weapon System, it has the characteristic that software modification is unavoidable with the change in Interface information. Modification of software causes an increase in development costs since it must take verification step such as software reliability test. In this paper, We design the standard architecture of weapon control software to minimize the modification elements of existing weapon control software. For Interface information management, Feature Model were applied to make a division between common factor and variable factor. In addition, Strategy Pattern were applied to improve the software design. Software evaluation test results show that new architecture provides better modifiability and reuse than existing software as well as the cost of development decrease.

• Convergence Security Journal
• /
• v.21 no.1
• /
• pp.79-92
• /
• 2021

In a society where ICT technology is converged, the use of various network-connected devices such as IoT is spreading. Network-connected devices are inevitably exposed to the threat of hacking such as information leakage, and countermeasures need to be prepared to respond. Security certification system for IoT devices has been introduced to promote security of IoT products, and for this purpose, legalization and standardization of certification standards and methods are in progress. In line with this, in Korea, as the Information and Communication Network Act was revised in 2020, ICT convergence devices connected to the network were newly defined as "information and communication network connected devices," and the basis for the security certification system is being established. We summarized related domestic and foreign trends and suggest specific considerations for implementing the security certification system for IoT devices in South Korea.

• Journal of Platform Technology
• /
• v.10 no.4
• /
• pp.39-46
• /
• 2022

Recently, digital contents including video and sound are created in various fields, transmitted to the cloud through the Internet, and then stored and used. In order to utilize digital content, it is essential to verify data integrity, and it is necessary to ensure network bandwidth efficiency of verified data. This paper describes the design and implementation of a server that maintains, manages, and provides data for verifying the integrity of video data. The server receives and stores image data from Logger, a module that acquires image data, and performs a function of providing data necessary for verification to Verifier, a module that verifies image data. Then, a lightweight Merkle tree is constructed using the hash value. The light-weight Merkle tree can quickly detect integrity violations without comparing individual hash values of the corresponding video frame changes of the video frame indexes of the two versions. A lightweight Merkle tree is constructed by generating a hash value of digital content so as to have network bandwidth efficiency, and the result of performing proof of integrity verification is presented.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.677-686
• /
• 2023

In this paper, we study the design and implementation of a smart home outing care system that recognizes the user's purpose of going out and delivers useful information that can help when going out. RSS service data of the Korea Meteorological Administration can be transmitted in real time using ESP8266, and a system that can provide weather information to users after analyzing the data using Arduino MEGA is implemented. Using App Inventor, you can pack the necessary items without forgetting, and you can change the settings according to the desired weather and purpose. The position of the microphone was placed outside to increase awareness by 12%, and the sensitivity of the pressure sensor was set to a maximum of 210 kΩ. If there is an obstacle between the doors, the doors open automatically. An ultrasonic sensor was placed on the ceiling of the drawer to recognize an object within the range of 0.5cm to 10cm to check the existence of an object, and a camera was installed to research a security reinforcement system.

• Land and Housing Review
• /
• v.3 no.1
• /
• pp.33-43
• /
• 2012

The research which it sees is the simulation research for "The Ecological Diversion of Forest Land-Use System". It accomplished the simulation which applies a permission standard, it developed escape it did a model and the basic draft. From the research which it sees in order to investigate the application characteristic of natural intimate mountain district application standard the mountain district whole aspect instance middle actual object a time mountain district use standard about under selecting which it will yell it applied. "Natural intimate mountain district development standard triangular position plan research" from compatibility of the mode of life mountain district whole aspect permission standard which is proposed about under investigating it presented the improvement program and a institutional improvement direction of corresponding standard. About under preserving plan it applies the yearly environment the mountain district to sleep it prepares the foundation for it accomplished the transcendental research for. With the achievement resources which the mountain district has resultantly must preserve a value, limit of the development size it will be able to minimize the effect which it follows in development, the arrangement method back could be proposed, also the case which will use the mountain district where it is damaged induces the development which cabinets to the concept of demobilization, the case which will apply the existing forest resources takes a triangular position with the act it will be able to increase the circulating value of the resources and will do.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.34-45
• /
• 2004

Existing Semangeum's water balance analysis simplifies whole basin to single basin and achieved volume of effluence that produce by Kajiyama way to foundation. But Semangeum is complicated and various rice-wine strainer supply system. And there is difficulty to apply as elastic when water balance element is changed at free point. Divided to unit possession station for suitable water balance analysis model application to Semangeum in this study. And developed basin water balance model of GIS base that can do details analysis is bite about development and transfer of an appropriation in the budget of basin water resources. Achieved study including abstraction and concept design that use UML (unified modeling language) diagram for details analysis, stream network composition for rice-wine strainer supply system application, preprocessing of GIS base and postprocessing module development, model revision and verification etc. Support of this water balance analysis model is available to establish efficient water resources administration plan through outward flow process analysis of water resources. And support is considered to be possible in more convenient and, reasonable water resources administration way establishment by minimizing manual processing in systematic water resources government official to user and support diversified analysis system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.971-976
• /
• 2007

In the U.S., utility damages or utility delay caused by conflicts during the underground utility relocation is one of the weighty problem in the construction industry. Also, in domestic case, delay and additional cost caused by underground utility(i.e, electricity, communication, gas, water supply and sewerage) relocation has been happened so that there is an increase of claims for responsibility between owners and contractors. However, there is insufficient survey for the recent circumstance of additional cost for delay and design changes caused by utility relocation and shortage of enough research for solving and analyzing of causes and their ripple effect. This research presents a result of the study about the best practices of FHWA(Federal Highway Administration), SHAs(State Highway Agencies) and the utility companies managing utility relocation. Also, it presents the basic concept of SUE(Subsurface Utility Engineering), the most reliable tool of FHWA presented, and investigates the developing status about SUE in Korea. At the end of this paper, this research proposes a practical and more applicable study about the efficient utility relocation focusing on local industry.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.146-156
• /
• 2013

Recently, to reflect the various needs of customers in the apartment field, the customized apartment has emerged. From the point of the customer, customized apartments have the definite advantage of being able to guarantee more customer options. On the other hand, from the point of the project manager, there are significant risk factors, with increase of management factors, construction delays, etc. The reasons for this are, to date, the insufficient systematic analysis of the project, and the lack of experience of similar projects. This study provides the waste factors of each phase in a customized apartment project. A survey and interview are conducted to achieve the waste factors using MUDA methodology; a process of the project was analyzed; and a factor of each process was identified. Also, AHP(Analytic Hierarchy Process) are used, to evaluate the waste factors in project stages. The AHP results show that "Design change" and "Inappropriate intervention in construction process" ranked highly in the waste factors. The results of our research will provide a countermeasure that addresses waste factors in similar projects, and contributes to reducing the extra cost and time in new projects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.106-112
• /
• 2010

Due to the improvement and stabilization of the social environment, construction market in the urban region is under shrinking. According, researches to lengthen the service life of the existing building structures are under the way through the remodeling or maintenance of deteriorated structures other than the new constructions. Similar situations are widely discussed in the domestic building construction market and the social importance of the remodeling of the existing building structures is increased. Although the structural stability of the building is uncertain due to the frequent repairing and structural changing, the remodeling works are usually conducted. In general, documents such as drawings and calculations for the design of the deteriorated structure to be remodeled are not kept. Accident at the remodeling site frequently occur because of the lack of thorough understanding of changed situations such as loadings, loading paths, changing of the mechanical properties of material, etc. In this paper, using the finite element analysis method, we investigated the structural behaviors of slab in the remodeling building and the results are applied to remodeling construction, and the appropriateness of the remodeling works are evaluated.