• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.402-405
• /
• 2003

As Remodeling is proceed in the limited condition that is utilization of existing resource, the selection of remodeling objects and scope are affected by the correlation of building systems. Unexpected problems have occurred in construction phase by lack of the consideration about correlation of building systems; increasing of cost, delaying of schedule etc. Therefore, this research suggests the Building System Correlation Diagram Model and the method for selecting the alternative reasonably in remodeling project.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.373-378
• /
• 2008

기존에는 잠재위험도와 해당지역 하나의 강우관측소에서의 기왕최대강우량을 이용하여 계획빈도를 결정하였다. 그러나 기왕최대강우량은 이미 발생한 최대강우량이기 때문에 안전치를 고려해 산정한 계획빈도를 따라가지 못하였고, 잠재위험도에 따른 계획빈도의 범위가 매우 작은 문제점이 있었다. 따라서 본 연구에서는 문산천 유역의 기왕최대강우량과 잠재위험도를 이용하여 계획빈도를 산정하는데 필요한 가중치를 결정하였다. 본 연구에서는 수도권지역 6개의 기상청 강우관측소 강우량 자료를 사용하여 크리깅기법으로 공간분포를 시키고자 하였다. 또한, 기왕최대강우량으로 계획빈도를 연결시키는데 있어서 발생하는 문제점을 해결하기 위하여 계획빈도의 가중치를 산정하고자 하였다. 문산천 유역에 잠재위험도 산정에 따라 계획빈도를 결정한 결과, 크리깅기법으로 문산천 유역에 기왕최대강우량에 해당하는 계획빈도는 160년 정도이며, 회귀식으로 각 소유역별로 계획빈도를 산정한 결과 약 110년에서 120년까지 분포하였다. 이렇게 산정된 계획빈도를 공시지가와 홍수량으로 가중치를 구하여 소유역별로 분포시킨 계획빈도 값은 대략 100년에서 200년으로 산정되었다. 잠재위험도와 피해액 산정기법을 이용하여 문산천에 최적 홍수방어대안을 선정하고자 하였다. 최적 대안을 선정하기 위한 방법론을 제시하고 이에 따라 잠재위험도를 산정하고 유역 분담량을 결정하여 적합한 구조적 홍수방어시설물을 Decision Tree라는 의사결정을 통하여 계획하고 조합하여 3개의 적정 홍수방어대안을 선정하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.574-582
• /
• 2018

In systems such as railways, automobiles, and airplanes, system malfunctions may lead to accidents, which often cause serious personal injury and economic loss. In previous studies, failure analysis has been performed, and safety measures derived using the component level information to reduce damage when a failure occurs. However, in functional safety concept, a focus is placed on lowering the frequency of occurrence of failures by performing risks analysis, setting up safety goals, and designing safety functions. Therefore, it is necessary to study how to determine the required safety function that can reduce the failure frequency to the acceptable level. To achieve this, we first studied a failure modeling method using SysML. It was then presented how several alternatives can be assessed to determine the desired safety function by simulating the generated SysML failure models and calculating the ability to reduce the failure frequency. A case study of a railway signaling system was done, demonstrating the effectiveness of the approach. We assessed whether the safety objectives were met for the alternative design of the railway signaling system through M & S. The results can be useful in that it can be applied from the early design phase and allow to choose the appropriate safety function that satisfies safety objectives among various design alternatives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2809-2817
• /
• 2010

The scholarly concern of train industry has been improved, since country focuses on this field. Especially, train maintenance facility has been studied for construction, because the facility is important to inspect the train that transports passenger and cargo. Various operation plans and criteria are considered to build train maintenance facility. In this paper, the decision making of train maintenance facility for construction is studied and analyzed with simulation, because mathematical theory is restricted to consider various operation plans and criteria. Through simulation, we analyze warm-up after selecting dependent factors, and extract data. The data is used to select a alternative in this problem, Multiple Attribute Decision Making(MADM). Previous study is difficult, complex and subjective for decision making. However, entropy measurement we used help decision maker for decision making, easily, simply, and objectively. This method can have decision maker choose the best alternative in case the train maintenance facility construction is fast revitalized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3841-3848
• /
• 2012

The process of an analysis of alternatives(AoA) attempts to select the best and balanced solution among a set of multiple candidate solutions under the constraints of cost, schedule, performance and risk(CSPR). The traditional AoA for the acquisition of a new weapon system has usually centered on the sequence of the requirement analysis, design synthesis, and cost estimation. An improved process for AoA is developed in this paper based on a multi-objective decision-making method, which is intended to be applied in the design concept refinement and material solution analysis stage for the acquisition of naval surface ships. The presentation of the proposed AoA approach is then followed by a case study for the next generation multi-purpose training ship based on the principles of systems engineering and also using the models of the effectiveness measure, cost estimation, and risk assessments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.24-29
• /
• 1999

The purpose of this study is to develop a method of applying response surface analysis to trade-off techniques for the conceptual design of armored vehicle. The problem areas of concern are the use of this method in the selection of optimum design points when user requirements are in conflict. The application of this method to trade-offs of performance parameters in terms of weight are presented.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.52-62
• /
• 2017

The purpose of this study is to develope an assessment method for parking lot remodeling alternative by adopting the asset management technique. In order to identify the Level of Service(LOS) and the Evaluation Measurement(EM), literatures was implemented which documented the consideration of parking lot plan, needs of the apartments' tenant, and various design standards. In addition, the authors conducted a three-time delphi survey for the identified 5 LOS and 19 EM to evaluate suitability and necessity of them and to collect additional opinion of experts. The LOS of parking lot were categorized into 5 areas such as Environmental effect and Convenience, Accessibility and so on. The 19 EM were determined to estimate the LOS quantitatively. The researchers analyzed the degree of importance of LOS and EM by using the Analytic Hierarchy Process (AHP) method. But construction cost was excepted from the analysis, because it is used as an independent variable in alternative assessment. In conclusion, the authors proposed the estimation criteria for EM, and the method and process for alternative assessment be performed to benefit-cost analysis using the LOS variation and construction cost. The assessment method for parking lot remodeling alternative was demonstrated effective to assess the parking lot remodeling alternative by case-study. This study has a academic significance by adopting the asset management techniques in the area of the parking lot remodeling. And the assessment method is expected to help deciding a reasonable remodeling alternative of parking lot, as it ensures the diversity for remodeling of the parking lot and reflects the needs of the occupant.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.82-89
• /
• 1999

A designer must make a lot of decisions in a design process. The decisions may be classified into selection decisions and compromise decisions. As the results of two decisions depends on the designer's intention it is necessary that the designer's intention should be reflected in the design systematically and precisely. As the AHP(Analytic Hierarchy Process) technique analyzes and evaluates a obscure selection problem hierarchically, designer's intention can be reflected in the design systematically. Also as qualitative attributes can be rated at quantitative criterion the designer's intention can be reflected consistently. Usually an engineering problem is a coupled problem in which a designer must select one alternative from a set of alternatives and find optimal characteristics of the alternative concurrently. As considered attributes are functions of the compromise system variables and the attributes's units and orders are different each other, attribute ratings must be normalized. This paper introduces a neural network at this normalization. So the attribute ratings can reflect designer's intention and the knowledge from his(her) experience automatically.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.95-106
• /
• 2014

The outer surfaces of free form buildings contain panels with two-directional curvatures. To construct these panels, complex geometric surfaces should be divided into forms and sizes that can be manufactured and constructed efficiently. Because the bigger the curvatures of these panel, the more expensive the construction costs, these complex curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures, which is called panel optimization. Small construction and design companies have trouble in calculating even rough estimate and cannot adjust expected construction cost of the panels based on comparison of design alternatives in conjunction with panel optimization process due to lack of knowledge and experience. This study conducts the research that can support designers' cost decision-making in the design stage of the free form buildings with respect to the panel optimization process. A 3D commercial application specialized to modeling free form shapes is used for the purpose.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.255-266
• /
• 2009

In this study, a robust aerospace system design process for the aerospace system is developed by considering the uncertainties of user requirements, manufacturing errors, and operational environment variation. User requirements are analyzed and quantified by decision making models and system engineering methods to select alternative concepts which satisfies the various requirements. Robust design and optimization method is applied to derive the robust solution of the selected system. First, a variance of objective function is calculated, and a mean value and a variance of target value are determined by the deterministic design optimization results of the system. A robust optimum design formulation is then needed to derive the robust solution that minimizes the variance of the response and moves the mean values to the target value. It is applied to Very Light Jet (VLJ) aircraft to which much attention is paid recently in civil aerospace market.