• 제목/요약/키워드: 선회부재

검색결과 4건 처리시간 0.021초

동시 선회 스크롤 압축기의 성능해석 (Performance analysis of co-orbiting scroll compressor)

  • 김현진;김명균;서원열
    • 설비공학논문집
    • /
    • 제11권6호
    • /
    • pp.716-724
    • /
    • 1999
  • In co-orbiting scroll compressor, the two scroll members are to orbit with independent radii, producing a relative orbit motion between them. One scroll member is driven by the crank mechanism while the motion of the other member is determined by geometrical constraints and reacting forces. This paper presents an analytical study on the performance of a co-orbiting scroll compressor. The following results have been obtained: Radial contact force between the scroll wraps is virtually free from the centrifugal force of the orbiting scroll member. The frictional losses are somewhat increased due to the complicated drive mechanism, yielding to a little lower EER compared to conventional radially compliant scroll compressors .

  • PDF

스크롤 압축기에서 축방향 순응하는 고정부재의 안정성 (Stability of the axially compliant fixed scroll in scroll compressors)

  • 김현진;이원학
    • 설비공학논문집
    • /
    • 제9권2호
    • /
    • pp.93-103
    • /
    • 1997
  • This study presents a way of improving the stability of fixed scroll in scroll compressors. For the scroll compressor whose fixed scroll is designed to move in the axial direction for the axial compliance, the fixed scroll is under the influence of the overturning moment produced by internal gas forces. Unless the overturning moment is properly compensated by the moments of reaction forces at the suspension of the fixed scroll to the compressor frame, the fixed scroll would exhibit wobbling motion, increasing gas leakage through the gap induced by the wobbling of the fixed scroll between the two scroll members. The conditions on which the wobbling motion can be suppressed have been found analytically; The axial position of the fixed scroll suspension should be made within a certain range. The upper limit of this range is the axial location for the o-rings which are inserted between the fixed scroll and the back pressure chamber to promote sealing for the gas in the back pressure chamber. And the lower limit is mainly determined by the magnitude of the axial sealing force. As long as the axial sealing force is not negative over all crank angles, the lower limit is not above the mid-height of the scroll wrap. Larger axial sealing force lower the lower limit.

  • PDF

포항 법광사지 출토 녹유전의 자연 과학적 조사 (The Scientific Analysis of Floor Tile Excavated from the Beobgwangsa Temple Site in the Pohang)

  • 문환석;한민수;황진주;김호상
    • 고문화
    • /
    • 60호
    • /
    • pp.101-120
    • /
    • 2002
  • 고대건축에 있어 중요부재로 사용되었던 전돌은 의장이 화려하고 섬세하여 통일신라시대에는 당${\cdot}$일본의 수준을 훨씬 능가하였다. 이 중 녹유전은 그 사용례가 특별한 건축물에 한정하여 사용하였으며 남겨진 자료 또한 소량일 뿐만 아니라, 현재까계 녹유전과 관련된 연구는 거의 이루어지지 않고 있어 분석을 시도하여 보았다. 조사된 녹유전은 통일신라시대의 가장 대표적인 포항 법광사지 출토 녹유전이다. 녹유전의 성분분석은 미소부X선회절분석기, 유도결합플라르마발광분석기, 미소부형광X선분석기, 열중량/시차별분석기/열이온화질량분석기의 방법으로 이루어졌다. 현미경관찰 결과, 단면구조는 대부분이 석영, 장석이며 주변에서 쉽게 관찰할 수 있는 보통의 점토입자로 구성되어 있었다. 태토의 성분 분석예는 거의 없음으로 기존에 조사 발표된 경주 및 장도 출토 토기와 비교하여 시 Al2O3와 Fe2O3가 조금 낮고 SiO2 성분이 더 높게 분석되었다. 또한 녹유의 성분분석 결과, PbO $70.2wt\%$를 함유한 순수한 납 유리질이었다. 전돌의 소성온도는 TG/DTA를 통해 $573^{\circ}C$에서의 흡열피크$(\alpha-quartz\rightarrow\beta-quartz)$$870^{\circ}C$에서 석영의 상전이$(\beta-quartz{\rightarrow}tridymite)$에 따른 발열피크가 관찰되었다. 이는 $900^{\circ}C$ 이전에는 특이한 열적 변화가 없고 이 온도 범위 이상에서 변화가 일어났다는 것을 의미하므로 $900^{\circ}C$ 이하에서 소성된 것이라 사료된다. XRD를 이용한 광물분석에서는 전형적인 점토광물인 quartz와 feldspar, muscovite peak가 동정되고, 고온 소성시 보여지는 tridymite, mullite와 cristobalite peak가 동정되지 않은 것으로 석영의 결정구조 변화에 따른 소성온도 추정으로 보아 $900^{\circ}C$ 이하의 저온소성으로 볼 수 있다. 전돌 녹유의 납동위원소비 분석결과는 한국중남-남부광산연과 일치하고 있으며, 따라서 포항 법광사지의 녹유전돌의 제작산지는 한반도 남부의 원료를 사용하여 제작했음을 추정할 수 있다.

  • PDF

식육부산물을 주재료로한 복합즉석조리식품의 안전성 연구 (A Study on Safety of Ready-to-eat Compound Foods with a By-products of Meat as the Base)

  • 송성민;이길봉;김명희;정지열;황원무;윤가리;김선회;고종명;김용희
    • 한국식품위생안전성학회지
    • /
    • 제22권2호
    • /
    • pp.82-87
    • /
    • 2007
  • 2006년 1월부터 12월까지 인천관내에 유통 중인 식육부산물을 이용한 복합즉석조리 제품 총 51건을 대상으로 안전성을 검사하였다. 주재료인 식육부산물은 납, 카드뮴, 수은 등 유해중금속 3종의 함량과 발생빈도가 높은 식중독균 9종의 오염여부를 조사하였다. 곱창전골의 주재료인 곱창의 경우는 잔류 ABS도 검사하였다. 복합즉석조리 식품에 포함되어있는 소스류는 대장균군을, 야채류는 잔류농약을 검사하였다. 유해중금속 검사 결과 제품 유형별로 납 $0.073{\sim}0.112ppm$, 카드뮴 $0.006{\sim}0.013ppm$, 수은 $0.746{\sim}0.978ppb$로 조사되어 외국이나 우리나라의 일반식품에 대한 허용기준 보다는 낮은 수준으로 나타났다. 곱창에 대하여 잔류 ABS를 검사한 결과 $0.8ppm{\sim}57.6ppm$(평균 10.3 ppm)이 검출되었다. 식품에 대한 ABS의 허용기준이 정해진 것은 없으나 먹는 물의 허용기준이 0.5ppm인 것과 비교하면 곱창에서 검출되는 ABS의 평균값은 먹는물의 20배를 초과한 수치이다. 식중독균의 오염여부를 조사한 결과 Staphylococcus aureus가 전체 51건 중에서 11건이 분리되어 21.6%의 높은 검출율을 나타냈다. Salmonella spp.는 1건(2.0%)이 검출되었고, Clostridium perfringens는 3건(5.9%)이었다. 제품 유형별로는 곱착전골에 들어있는 곱창 34건 중 12건에서 식중독균이 분리되어 35.3%의 가장 높은 검출율을 보였으며, 부대찌개의 주재료인 햄과 소시지는 25%(2/8), 기타 식육부산물 재료는 20%(1/5)의 검출율을 나타냈다. 선지찌개 중의 선지에서는 식중독균이 검출되지 않았다. 소스류에서 검출된 대장균군은 28.4%(27/95)의 높은 검출율을 보였다. 부재료인 야채류의 잔류농약 검사 결과 총 45건의 시료중 4건에서 농약이 검출되었는데, 클로로타로닐 2.8 ppm, EPN 10.3 ppm, 클로로피리포스 0.4 ppm, 인독사카브 0.7 ppm이었다. 콩나물 33건에서 켑탄과 카벤다짐을 분석한 결과 모두 검출되지 않았다. 연구결과 시판되고 있는 식육부산물을 이용한 복합즉석 조리 식품은 위생상 많은 문제점을 가지고 있었다. 이러한 문제점온 해결하기 위해 현재보다 폭넓고 광범위한 검사가 필요할 것이며, 국민이 안심하고 선택해서 먹을 수 있는 식육부산물을 이용한 복합즉석조리 식품의 생산을 위한 기준과 규격의 보완이 시급한 실정이다.