• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2001

This study focuses on the potential flow analysis for a hull with the transom stern. The method is based on a low order panel method. The Kelvin type free-surface boundary condition which is known to better fit experimental data for a high speed is applied. To treat a dry transom stern effect a special treatment for the free-surface boundary condition is adopted at the free-surface region after the transom stern. Trim and sinkage, which are important in high speed ships, are considered by an iterative method. Pressure and momentum approaches are used to calculate the wave resistance. Numerical calculations are performed for Athena hull and these results are compared with the experimental data and also other computational results.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.197-201
• /
• 2002

양식장 해양 레져, 항구 등에서 Calm Sea Area을 필요로 한다. 착저식은 소파효율은 좋으나 해수순환을 방해하여 환경에 좋지 않은 영향을 미치게 된다. 또한 설치비용이나 설치 해역의 한계가 있다. 따라서 이러한 한계들을 극복하기 위해서 부유식 소파구조물을 채택하였다. 본 논문에서는 몇 가지 소파공의 크기를 가지는 반 투과성 부유 소파구조물을 무한수심에서 유체역학적 특성과 소파효율을 계산하였다. 산란문제와 발산문제를 해결하기 위해 선형 포텐셜이론을 사용하여 구조물의 유체역학적 특성을 계산하였다. 적절한 소파공의 크기를 결정함에 따라 소파효율을 향상시킬 수 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1910-1913
• /
• 2006

To solve the interaction of incident monochromatic waves with a bottom-fixed vertical circular cylinder, a numerical analysis by boundary element method is developed using three-dimensional linear potential theory. A numerical analysis by boundary element method is based on Green's theorem and introduce to an integral equation for the fluid velocity potential around the vertical circular cylinder. These numerical results are compared with those of ManCamy and Fuchs(1954) and Williams and Mansour(2002), and it has shown good relationship with their results. This numerical analysis developed by boundary element method will be applied for various offshore structures to be constructed in coastal zones in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.54-62
• /
• 2008

A new solution method was developed to solve the free surface flow around a hull and named as 'Variable Free Surface Panel Method'. In the method the non-linearity of the free surface boundary conditions was fully taken into account and the raised panel method was employed to effectively solve the problem. The transom stern flow was also considered and the panel on the hull was generated using the panel cutting method. Numerical calculations were performed for KCS(KRISO Container Ship) hull form and compared with the experimental data to confirm the validity of the method. The comparison with the conventional free surface panel method was also accomplished. It is confirmed that new method gives more reliable results than the conventional method.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.86-97
• /
• 1993

A numerical method is developed for the nonlinear motion of two-dimensional wedges and axisymmetric-forced-heaving motion using Semi-Largrangian scheme under assumption of potential flows. In two-dimensional-problem Cauchy's integral theorem is applied to calculate the complex potential and its time derivative along boundary. In three-dimensional-problem Rankine ring sources are used in a Green's theorem boundary integral formulation to salve the field equation. The solution is stepped forward numerically in time by integrating the exact kinematic and dynamic free-surface boundary condition. Numerical computations are made for the entry of a wedge with a constant velocity and for the forced harmonic heaving motion from rest. The problem of the entry of wedge compared with the calculated results of Champan[4] and Kim[11]. By Fourier transform of forces in time domain, added mass coefficient, damping coefficient, second harmonic forces are obtained and compared with Yamashita's experiment[5].

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.82-98
• /
• 1994

A mathematical model for the hydrodynamic forces acting on the ship manoeuvring in waves is formulated and a numerical method for the problem is developed. The motion of a ship, which manoeuvres in waves, may be thought to have two components; one is a high frequency component due to encounter waves, and the other is a low frequency component due to manoeuvring motion. So the method of two time scale expansion is used to divide linear boundary value problem. For the effects of waves on the manoeuvring motion of a ship, only the second order drift forces are considered. The integral equation for the velocity potential is solved by 3 dimensional panel method and hydrodynamic forces are calculated by direct integral method.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.216-223
• /
• 2004

A nonlinear sloshing problem is numerically simulated. During excessive sloshing the sloshinginduced impact load can cause a critical damage on the tank structure. A three-dimensional free-surface flow in a tank is formulated in the scope of potential flow theory. The exact nonlinear free-surface condition is satisfied numerically. A finite-element method based on Hamiltons principle is employed as a numerical scheme. The problem is treated as an initial-value problem. The computations are made through an iterative method at each time step. The hydrodynamic loading on the pillar in the tank is computed.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.159-173
• /
• 1991

This paper describes a potential-based panel method formulated for the analysis of a super-cavitating two-dimensional hydrofoil. The method employs normal dipoles and sources distributed on the foil and cavity surfaces to represent the potential flow around the cavitating hydrofoil. The kinematic boundary condition on the wetted portion of the foil surface is satisfied by requiring that the total potential vanish in the fictitious inner flow region of the foil, and the dynamic boundary condition on the cavity surface is satisfied by requiring thats the potential vary linearly, i.e., the tangential velocity be constant. Green's theorem then results in a potential-based integral equation rather than the usual velocity-based formulation of Hess & Smith type. With the singularities distributed on the exact hydrofoil surface, the pressure distributions are predicted with improved accuracy compared to those of the linearized lilting surface theory, especially near the leading edge. The theory then predicts the cavity shape and cavitation number for an assumed cavity length. To improve the accuracy, the sources and dipoles on the cavity surface are moved to the newly computed cavity surface, where the boundary conditions are satisfied again. This iteration process is repeated until the results are converged. Characteristics of iteration and discretization of the present numerical method are much faster and more stable than the existing nonlinear theories. The theory shows good correlations with the existing theories and experimental results for the super-cavitating flow. In the region of small angles of attack, the present prediction shows and excellent comparison with the Geurst's linear theory. For the long cavity, the method recovers the trends of the Wu's nonlinear theory. In the intermediate regions of the short super-cavitation, the method compares very well with the experimental results of Parkin and also those of Silberman.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.11-18
• /
• 2000

This paper is concerned with the generation of an optimal forward hull form by a nonlinear programming method. A Rankine source panel method based on the inviscid and potential flow approximation is employed to calculate the wave-making resistance and SQP method is also used for the optimization. The hull form is represented by a spline function. The forward hull form of a minimum wave resistance with the given design constraints is generated. In addition, the forward hull form of a minimum total resistance by considering the frictional resistance together with an empirical form factor is produced and compared with the former result.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.67-81
• /
• 2000

An accurate and efficient numerical method for two-dimensional nonlinear radiation problem has been developed. The wave motion due to a moving body is described by the assumption of ideal fluid flow, and the governing Laplace equation can be effectively solved by the higher-order boundary element method with the help of the GMRES (Generalized Minimal RESidual) algorithm. The intersection or corner problem is resolved by utilizing the so-called discontinuous elements. The implicit trapezoidal rule is used in updating solutions at new time steps by considering stability and accuracy. Traveling waves caused by the oscillating body are absorbed downstream by the damping zone technique. It is demonstrated that the present method for time marching and radiation condition works efficiently for nonlinear radiation problem. To avoid the numerical instability enhanced by the local gathering of grid points, the regriding technique is employed so that all the grids on the free surface may be distributed with an equal distance. This makes it possible to reduce time interval and improve numerical stability. Special attention is paid to the local flow around the body during time integration. The nonlinear radiation force is calculated by the "acceleration potential technique". Present results show good agreement with other numerical computations and experiments.