• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.75-84
• /
• 1999

Systematic studies for the effect of the linewidth enhancement factor, the confinement factor, the internal loss and the cavity length on the single mode gain difference and the frequency detuning are performed for $\lambda$/4 phase shifted DFB lasers above threshold. The above threshold characteristics are mainly determined by the linewidth enhancement factor, not by the confinement factor or the parameter defined by the product of the linewidth enhancement factor and the confinement factor. The normalized internal loss defined by the product of the internal loss and the cavity length mainly determines the above threshold characteristics compared to that of the internal loss or the cavity length alone. The effect of the cavity length on threshold characteristics is larger than that of the internal loss in the case of the same normalized internal loss. The above threshold characteristics of quantum well lasers are more resistant to the variations of the confinement factor and the normalized internal loss than those of bulk lasers due to the small linewidth enhancement factor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.332-337
• /
• 2006

We prepared 100 nm-thick CoNi composite silicide on a 70 nm-thick polysilicon substrate. Composite silicide laye.s were formed by rapid thermal annealing(RTA) at the temperatures of $700^{\circ}C,\;900^{\circ}C,\;1000^{\circ}C$ for 40 seconds. A Focused ion beam (FIB) was used to make nano-patterns with the operation range of 30 kV and $1{\sim}100$ pA. We investigated the change of thickness, line width, and the slope angle of the silicide patterns by FIB. More easily made with the FIB process than with the conventional polycide process. We successfully fabricated sub-100nm etched patterns with FIB condition of 30kv-30pA. Our result implies that we may integrate nano patterns with our newly proposed CoNi composite silicides.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.157-162
• /
• 2020

In recent years, laser induced graphene process have been intensively studied for eco-friendly electronic device such as flexible electronics or thin film based energy storage devices because of its simple and effective process. In order to increase the performance and efficiency of an electronic device using such a graphene patterned structure, it is essential to study an optimized laser patterning condition as small as possible linewidth while maintaining the graphene-specific 2-dimensional characteristics. In this study, we analyzed to find the optimal line pattern by using a Ti:sapphire femtosecond laser based photo-thermal reduction process. we tuned intensity and scanning speed of laser spot for generating effective graphene characteristic and minimum thermal effect. As a result, we demonstrated the reduced graphene pattern of 30㎛ in linewidth by using a focused laser beam of 18㎛ in diameter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.520-520
• /
• 2013

Lateral 구조를 갖는 탄소나노튜브 에미터 캐소드의 금속전극 선폭과 간격은 탄소나노튜브 에미터 밀도와 게이트에 인가되는 전계의 크기에 밀접한 관계가 있어 전계방출특성에 큰 영향을 나타내므로 조속한 상업화를 위해서는 최적화 연구가 요구된다. 따라서 본 연구에서는 금속전극의 선폭과 간격을 110/30, 80/30, 40/30과 120/20, 90/20, 20/20 ${\mu}m$로 각각 변화시켜 4.6인치 탄소나노튜브 에미터 기반 flat light lamp 개발연구를 진행하였다. 이때 사용한 금속전극은 2 mm 두께를 갖는 4.6인치 소다라임 글라스 위에 패턴 된 PR에 Ag를 sputtering하여 증착 후 PR을 lift-off하여 형성하였다. 이와 같이 형성된 금속전극은 ~1 ${\mu}m$와 12 nm의 두께와 표면단차를 각각 가지고 있었다. 형성된 금속전극 위에 유전체와 탄소나노튜브 에미터를 각각의 페이스트를 사용하여 스크린 인쇄와 소성과정을 통해 형성하였다. 이때 레이저 빔을 전극사이의 빈 공간에 조사하여 탄소나노튜브 에미터를 금속전극 위에 정밀하게 정렬하였으며 잔존하는 유기물과 유기용매를 없애기 위해 대기압 공기분위기의 $410^{\circ}C$에서 10분간 소성과정을 거친 후 접착테이프를 사용하여 잔탄 속에 있는 탄소나노튜브 에미터를 물리적 힘으로 수직하게 노출시켜 캐소드를 준비하였다. 애노드는 전계에 의해 방출된 전자의 측정과 전계방출 이미지를 얻기 위해서 P22 형광체와 Al박막이 증착된 2 mm 두께의 소다라임 글라스를 사용하였다. 캐소드와 애노드 사이의 간격은 6~10 mm로 유지하였고, 진공챔버의 기본 압력을 $5{\times}10^{-6}$ Torr 이하로 유지하였다. 캐소드와 게이트 전극에 1, 4 kHz와 3% duty를 갖는 bipolar 형태의 DC 사각펄스파를, 애노드에 ~18 kV의 DC 고전압을 각각 인가하여 평가하였으며 추후, 이렇게 제작된 다양한 선폭과 간격을 갖는 탄소나노튜브 에미터 기반 flat light lamp의 전계방출특성과 효율에 대한 비교 연구를 진행할 계획이다.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.11-17
• /
• 2014

We measured the ferromagnetic resonance (FMR) signal using the monodisperse iron oxide nanoparticles with size D=4.67 nm, 5.64 nm and 6.34 nm synthesized by using the thermal decomposition method, respectively. The measured ferromagnetic resonance signals were compared with the calculated ones for superparamagnetic nanoparticles with lognormal volume distribution. The FMR linewidth broadening was propositional to tanh($V^2$), where V was volume of nanoparticles. The narrow linewidth of small size nanoparticles was due to the surface spins, while the broad linewidth of large size nanoparticles was due to the bulk spins affected by the crystalline structure of iron oxide nanoparticles. The superposition of surface and bulk effect was confirmed at D=5.64 nm nanoparticles, which was near the critical size for linewidth transition from surface effect to bulk effect.

• Korean Journal of Optics and Photonics
• /
• v.12 no.2
• /
• pp.143-149
• /
• 2001

We performed the intracavity frequency-doubling of a tunable continuous-wave Ti:sapphire laser using a lithium triborate $(LiB_3O_5, LBO)$ crystal. For an efficient intracavity frequency-doubling, we measured the spectral and the angular bandwidth about the $\theta$-direction of LBO crystal. The measured values at a fundamental wavelength of 800 nm were 1.54 nm.cm and 3.8 mrad.cm, respectively. As a result of an intracavity frequency-doubling, we obtained the second-harmonic generation output power of 5.3 mW at 400 nm with the full width at half maximum(FWHM) of 0.089 nm from the fundamental output power of 185 mW at 800 nm. The frequency-doubled output was tuned from 397 nm to 403 nm.403 nm.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.448-452
• /
• 1999

The Gaussian impulse fUllction initially assumed in the inverse problem is $e^{-\sigma^2\chi^2}$. The modified Gaussian amplitude pupil function $e^{\frac-{\omega^2}{4\sigma^2}$ is obtained by the inverse Fourier transform of $e^{-\sigma^2\chi^2}$. A Gaussian amplitude modulation plate (GAMP) is designed and fabricated by using absorption and transparence glass which are the same refractive index. It is compared the experimental transmittance with theoretical that of GAMP. It is found that the linewidth of Gaussian optical imaging system obtained by wavelength is $0.365{\mu}m$ and NA is 0.07 is decrease 2/3 than that of Rayleigh.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.05a
• /
• pp.149-150
• /
• 2014

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1996.06a
• /
• pp.335-338
• /
• 1996

• The Magazine of the IEIE
• /
• v.14 no.5
• /
• pp.14-19
• /
• 1987