• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.516-524
• /
• 2008

This paper presents a new modeling technique for the simulation of cloth specific characteristics with a set of hard constraints using an implicit constraint enforcement scheme. A conventional explicit Baumgarte constraint stabilization method has several defects. It requires users to pick problem-dependent coefficients to achieve fast convergence and has inherent stabilization limits. The proposed implicit constraint enforcement method is stable with large time steps, does not require problem dependent feed-back parameters, and guarantees the natural physics-based motion of an object. In addition, its computational complexity is the same as the explicit Baumgarte method. This paper describes a formulation of implicit constraint enforcement and provides a constraint error analysis. The modeling technique for complex components of cloth such as seams, buttons, sharp creases, wrinkles, and prevention of excessive elongation are explained. Combined with an adaptive constraint activation scheme, the results using the proposed method show the substantial enhancement of the realism of cloth simulations with a corresponding savings in computational cost.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.99-109
• /
• 2010

Existing research about automated wafer transport management strategy for semiconductor manufacturing equipment was mainly focused on dispatching rules which is optimized to specific system layout, process environment or transfer patterns. But these methods can cause problem as like requiring additional rules or changing whole transport management strategy when applied to new type of process or system. In addition, a lack of consideration for interconnectedness of the added rules can cause unexpected deadlock. In this study, in order to improve these problems, propose dynamic priority based transfer job decision making algorithm which is applicable with regardless of system lay out and transfer patterns. Also, extra rule handling part proposed to support special transfer requirement which is available without damage to generality for maintaining a consistent scheduling policies and minimize loss of stability due to expansion and lead to improve productivity at the same time. Simulation environment of Twin-slot type semiconductor equipment was built In order to measure performance and examine validity about proposed wafer scheduling algorithm.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.91-101
• /
• 2009

This study's purpose is to revive pre-construction situation earlier than construction of media facade using light-emitting diode, and analyze the strong and weak points of simulation image making process and technology, including lots of expressing methods. Exterior building decoration that was originated from Super Graphic led to the LED construction with a trend of increased night activities of these days. Initial Super Graphic was just in the level of deciding what to do with simple CAD drawings, but today's media facade construction is not so simple as the previous ones. This is because of the problems that should think about balances between neighboring environment and buildings, including high construction costs. According to survey results, media facade construction simulation's various expressing methods, its processes of analysis, and its strong & weak points will suggest standards for its size of construction and simulation purpose, including recommending suggestions that can respond rapidly by clients' diverse demands.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.8
• /
• pp.113-122
• /
• 2024

In this paper, we conducted a thorough investigation of existing simulators for running simulations of Vehicular Adhoc Networks (VANET) in realistic road environments, such as digital twins. After careful consideration, we chose a simulator that combines OSM (OpenStreetMap), SUMO (Simulation of Urban MObility), and OMNeT++ due to its open-source nature and efficient performance. Using this integrated simulator, we carried out VANET simulations in both simple virtual road environments and realistic road environments. Our findings revealed significant differences in VANET performance between the two types of environments, emphasizing the need to consider realistic road and traffic environments for reliable VANET operation. Furthermore, our simulations demonstrated significant performance variability, with performance degradation observed as vehicle density decreased and dynamic changes in network topology increased. These results underscore the importance of digital twin-based approaches in VANET research, highlighting the need to simulate real-world road and traffic conditions rather than relying on simple virtual road environments.

• Journal of The Korean Association For Science Education
• /
• v.38 no.4
• /
• pp.527-539
• /
• 2018

Although a simulation is proposed as a candidate for alternative contents of inquiry activities, design cases focused on the characteristic of science education are rare. This study suggested the definition and requirements of science simulation to clarify science subject-specific design and set up the design guidelines to consider usability. Then the science simulation was developed in the form of an app for mobile devices, where 'Flash and Actionscript 3.0' was selected as a development tool for compatibility, functionality, ease of use and optimization for mobile devices with educational applicability in mind. In effect, six science simulation apps were prepared for seven classes of inquiry activity in 10 science classes on the chapter of 'composition of material' in middle school science 2 textbooks. In this regard, the main advantages of the simulation apps expected from each design characteristic are also suggested in this article. In the implementation of the science simulation apps, educational effects were investigated based on the statistical comparison, while 134 students in the second grade in a coeducational middle school, Gyeonggi-do participated as an intervention group and a control group. Our results showed that the scores of academic achievement and affective test in the intervention group were significantly higher than those of the control group (p <.05). In the questionnaire survey on usability, most students responded positively to the design of the science simulation apps. This study will contribute to expanding the horizon of design about science simulation as a design case in science education.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2372-2380
• /
• 2015

In this paper, we propose frequency allocation and path selection scheme in underlay cognitive radio (CR) networks using network coding. In the proposed scheme, we choose the path with consideration of network coding and interference temperature in underlay CR networks and propose an optimization problem to maximize the system throughput of secondary users (SUs). Then, we represent the proposed optimization problem as the multi-dimensional multiple-choice knapsack problem and give the theoretical upper bound for the system throughput of SUs by using linear programming. Finally, we compute the system throughput of SUs by using brute-force search (BFS) and link quality first (LQF) scheme in underlay CR networks. Simulation results show that the system throughput of SUs with BFS is higher than that with LQF in underlay CR networks with and without application of network coding, respectively.

• The KIPS Transactions:PartA
• /
• v.13A no.1 s.98
• /
• pp.11-18
• /
• 2006

In the Internet of various networks, it is difficult to reduce real routing time by just minimizing their hop count. We propose an adaptive proximity route selection method in DHT-based peer-to-peer systems, in which nodes select the nぉe with smallest lookup latency among their routing table entries as a next routing node. Using Q-Routing algorithm and exponential recency-weighted average, each node estimates the total latency and establishes a lookup table. Moreover, without additional overhead, nodes exchange their lookup tables to update their routing tables. Several simulations measuring the lookup latencies and hop-to-hop latency show that our method outperforms the original Chord method as well as CFS' server selection method.

• The Journal of Korean Association of Computer Education
• /
• v.15 no.5
• /
• pp.55-62
• /
• 2012

With the development of mobile communications and Internet technology, there is a strong need to provide seamless and fast connectivity for roaming devices. Generally, the mobile host (MH) may have several available networks when entering a new wireless area. However, the standard of decision for user's internet connection is provided only the subsystem identification (SSID) and signal strength of access point (AP). These two standards could not enough to decide optimal AP to the MH. Therefore, to decide the optimal AP, more information is needed. In this paper, we present additional information such as status of MH, capacity, current load, and depth of network hierarchy, by router advertisement message at layer 3. Also, we proposed decision engine (DE) on the MH that analyzes APs and decides the optimal AP automatically by AP's status information. For the MH, wireless connection period is increased, the power consumption is decreased, and the signaling overhead is reduced. For AP and router, the load balancing is provided and the network topology can also be more efficient.

• Environmental and Resource Economics Review
• /
• v.16 no.3
• /
• pp.683-699
• /
• 2007

This study applied the choice experiment (CE) method to measure values of statistical lives from multi-attributed mortality risk reduction choices. The four characteristics of mortality risk (i.e. cause of death, voluntariness of mortality risk, timing of death, magnitude of mortality risk reduction) are utilized to design the alternatives of choice sets. The estimation results for the multinomial logit model show that individuals are willing to pay 27,930 won per year for a change from the status quo to a $\frac{1}{100}$ mortality risk reduction for 10 years, 116,773 won per year for mortality risk reduction associated with adults, 97,682 won per year for voluntary mortality risk reduction, 77,234 won per year for involuntary mortality risk reduction. There were several estimates of VSL related to different attributes of mortality risk. The mean VSLs of infant/child/young adult ranged from 1,165 million won to 1,367 million won. The mean VSLs ranged from 1,631 million won to 1,833 million won for adult, and were between 1,128 million won and 1,330 million won for old person.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.712-718
• /
• 2009

This paper proposes the optimal transmission parameter selection method for an energy efficient Wireless Personal Area Network (WPAN) system which is applicable to the Maritime Telematics targeting for various ship models. Since the transmission parameter selection is an important factor for WPAN system to decide its energy efficiency, we propose an energy consumption model for ship area network (SAN) employing IEEE 802.15.3 based TDMA HR-WPAN model and analyzes the effect of transmission parameter selection on the performance of energy consumption. In particular, the main performance decision parameter of the SAN applying HR-WPAN is path loss, since it is very varied according to the material of shipbuilding such as steel (large ship), FRP (medium size ship) and compound wood (small ship). Thus, we analyzed and demonstrated that the proper transmission parameter selection among transmit power, PHY data rate and fragment size for each ship model guarantee the energy efficiency.