• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.119-134
• /
• 2001

This paper proposed a dynamic transit vehicle simulation model and a dynamic transit passengers simulation model, which can simultaneously simulate the transit vehicles and passengers traveling on a transit network, and also developed an algorithm of dynamic departure time choice model based on individual passenger. The proposed model assumes that each passenger's behavior is heterogeneous based on stochastic process by relaxing the assumption of homogeneity among passengers and travelers have imperfect information and bounded rationality to more actually represent and to simulate each passenger's behavior. The proposed model integrated a inference and preference reforming procedure into the learning and decision making process in order to describe and to analyze the departure time choices of transit passengers. To analyze and evaluate the model an example transit line heading for work place was used. Numerical results indicated that in the model based on heterogeneous passengers the travelers' preference influenced more seriously on the departure time choice behavior, while in the model based on homogeneous passengers it does not. The results based on homogeneous passengers seemed to be unrealistic in the view of rational behavior. These results imply that the aggregated travel demand models such as the traditional network assignment models based on user equilibrium, assuming perfect information on the network, homogeneity and rationality, might be different from the real dynamic travel demand patterns occurred on actual network.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2004.05a
• /
• pp.20-24
• /
• 2004

광범위한 네트워크의 연결과 이를 이용하는 조직이나 개인의 증가로 인터넷은 정보를 교환하고 거래를 수행하는 주요한 수단이 된 반면에 해커나 바이러스의 침입 또한 증가하여 공격에 쉽게 노출되어있다. 이러한 보안상의 문제점을 해결하기 위하여 컴퓨터나 네트워크 시스템의 활동을 감시할 수 있는 침입 탐지 시스템(IDS)과 같은 보안 요소를 도입하였으며, 탐지에 대한 성능을 향상시키기 위하여 네트워크를 기반으로 하는 다중 침입 탐지 시스템을 응용하여 네트워크에 분산된 에이전트들 중에서 발생된 침입에 알맞은 에이전트를 선택하도록 하여 침입 탐지를 효과적으로 할 수 있게 하였다. 본 연구에서는 보안 시스템의 연동을 위하여 계약망 프로토콜을 적용하였다. 계약망 프로토콜은 분산된 에이전트들 중에서 입찰과정을 통하여 최상의 에이전트를 선택하는데 이때, 에이전트를 선택하는 과정에 있어서 퍼지 규칙 기반 시스템을 적용한 퍼지 컨트롤러를 설계하여 시뮬레이션 한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.582-586
• /
• 2002

순차 논리 회로를 설계하기 위하여 설계용 틀을 이용해 설계하고 그 결과를 시뮬레이션 한 것을 검토하여 실제 회로로 구현한다. 본 논문에서는 시뮬레이션을 하기 위한 회로설계 방법 중 Statatable를 작성하여 틀에 입력하고 심볼로 만들어, 이것을 이용하여 시스템을 구성 후 시뮬레이션을 하였다. 특히 설계 예제로 선택한 교통 신호제어 시스템은 대기차량이 없는 차로와 있는 차로를 구분하여 선택적으로 신호를 제공하므로써 교통소통의 효율을 물론 앞으로 교통 신호 제어체계의 새로운 모델을 제시하고 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.15-17
• /
• 2022

In order to minimize surplus parts in ball bearing selective assembly systems, it is necessary to optimize the selection probability by grasping the dimensional distribution of each part. But the use of a complex system causes delays in the production process. In this paper, we propose cluster priority selection algorithm that can quickly and simply determine the selection priority in ball bearing selective assembly system. In addition, we assume the simulated situation with the data collected in the actual ball bearing selective assembly process, and evaluate the incidence of surplus part and runtime by simulating the cluster priority selection algorithm and the exiting algorithm. As a result of the simulation, the cluster priority selection algorithm generated 83.8% less surplus parts, and 39.7% less runtime than the existing algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.853-861
• /
• 2010

Experimental conditions are set with environmental factors which can affect ship navigation. In FTS simulation, infinite simulation can be theoretically tested with no time constraint but the simulated result with the same experimental condition is repeated due to mathematical model. RTS simulation can give more resonable results but costs at lest 30 minutes for only experimental time. The mixture of two simulation methods using probability density function has been proposed: some of experimental conditions in which ship-handling is most difficult are selected with FTS and are tested in RTS. It has drawback that it does not consider the navigation route but aggregated track index. In this paper, anomaly detection approach is suggested to select some experimental conditions of FTS simulation which are most difficult in ship-handling during the navigation route. An empirical result has been shown.

• Journal of Korean Society of Transportation
• /
• v.24 no.6 s.92
• /
• pp.89-102
• /
• 2006

The purpose of this paper is to develop a dynamic OD estimating model to overcome the limitation of depicting teal situations in dynamic simulation models based on static OD trip. To estimate dynamic OD matrix we used the hybrid discrete choice model(called the 'Demand Simulation Model'), which combines travel departure time with travel mode and travel path. Using this Demand Simulation Model, we deduced that the traveler chooses the departure time and mode simultaneously, and then choose his/her travel path over the given situation In this paper. we developed a hybrid simulation model by joining a demand simulation model and the supply simulation model (called LiCROSIM-P) which was Previously developed. We simulated the hybrid simulation model for dependent/independent networks which have two origins and one destination. The simulation results showed that AGtt(Average gap expected travel time and simulated travel time) did not converge, but average schedule delay gap converged to a stable state in transportation network consisted of multiple origins and destinations, multiple paths, freeways and some intersections controlled by signal. We present that the hybrid simulation model can estimate dynamic OD and analyze the effectiveness by changing the attributes or the traveler and networks. Thus, the hybrid simulation model can analyze the effectiveness that reflects changing departure times, travel modes and travel paths by demand management Policy, changing network facilities, traffic information supplies. and so on.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.221-231
• /
• 2012

최근 국방 분야의 모델링 및 시뮬레이션에서는 훈련 비용과 개발 비용을 절감하기 위하여 재구성 가능한 시뮬레이션 모델의 연구를 추진하고 있다. 기존 연구에서는 소프트웨어 프로덕트 라인 공학을 적용하여 BCM(Basic Component Model)을 정의하고 이들을 재구성 할 수 있는 도구를 개발하였다. 하지만 프로덕트를 생성하기 위한 컴포넌트 재구성 시 설계자의 의사를 체계적으로 반영할 수 없으며, 각각의 컴포넌트들의 정량적 요소를 비교,평가 후 컴포넌트를 선택하여 프로덕트를 구성하기 어렵다는 단점이 있다. 따라서 본 논문에서는 컴포넌트 재구성 시 설계자의 의사결정과정을 지원하고자 컴포넌트들의 메타데이터를 조사하고 계층적으로 분석하여 컴포넌트를 선정할 수 있는 방법을 제안한다. 또한 이것을 기반으로 컴포넌트 재구성 조합 모형을 도출 할 수 있도록 하는 의사결정체계를 제시한다. 먼저 의사결정의 한 방법인 AHP(Analytic Hierarchy Procedure)를 이용하여 컴포넌트를 선정하고, 다음으로 선정된 컴포넌트를 검색하고 선택할 수 있는 의사결정지원시스템을 설계 하였다.

• Journal of the Korea Society for Simulation
• /
• v.16 no.2
• /
• pp.45-54
• /
• 2007

In this article, we propose a different modeling approach, which aims at the simulation optimization so as to meet the design specification. Generally, Multi objective optimization problem is formulated by dependent factors as objective functions and independent factors as constraints. However, this paper presents the critical(dependent) factors as objective function and design(independent) factors as constraints for the selection of design factors directly. The objective function is normalized far the generalization of design factors while the constraints are composed of the simulation-based regression metamodels fer the critical factors and design factor's domain. Then the effective and fast solution procedure based on the pareto optimal solution set is proposed. This paper provides a comprehensive framework for the system design using the simulation and metamodels. Therefore, the method developed for this research can be adopted for other enhancements in different but comparable situations.

• Tunnel and Underground Space
• /
• v.24 no.2
• /
• pp.111-119
• /
• 2014

This study developed a Windows-based simulation program for selecting equipments in open-pit shovel-truck haulage systems. Visual Basic.NET 2012 was used to develop the graphic user interface (GUI) and the GPSS/H simulation language was utilized to implement the simulation engine of program. When users establish simulation parameters through the GUI, the program calls the simulation engine to perform the simulations repeatedly. Then, it finds the optimal fleet of equipments required for operating the open-pit shovel-truck haulage systems efficiently. Application of the program to the Ssangyong open-pit limestone mine, Gangwon-do, Korea, showed that the daily average profit of shovel-truck haulage operation can be maximized (i.e. 88,552 USD) under following conditions: (a) 4 trucks are dispatched into each loading point and (b) a crusher with capacity of 1,500tph is utilized.

• Journal of the Korea Society for Simulation
• /
• v.18 no.1
• /
• pp.17-25
• /
• 2009

This paper suggests fuzzy-based Segment-Boost method and an effective method for face recognition using the fuzzy-based Segment-Boost. Fuzzy-based Segment-Boost eliminates the limitations of Segment-Boost, and it guarantees improved learning performance and the stability of the performance. By using the fuzzy theory, fuzzy-based Segment-Boost optimizes the selection number of sub-vectors, and leads the optimized learning performance. The fuzzy controller designed in this paper measures learning performance of the fuzzy-based Segment-Boost, and it controls the selection number of sub-vectors by inferring the optimized selection number. The simulation results show that the fuzzy controller inferred the selection number which is very approximate to the true optimized value. As a result, fuzzy-based Segment-Boost showed higher face recognition rate than compared boosting methods and it preserves the velocity of feature selection as fast as that of Segment-Boost. From the experimental results, it was proved that fuzzy-based Segment-Boost has improved and stable performances of learning, feature selection and face recognition.