• Clean Technology
• /
• v.25 no.1
• /
• pp.63-73
• /
• 2019

Numerical analysis was done to evaluate the chemical reaction and the reduction rate inside of selective non-catalytic reduction to denitrification in combustion process. The $NO_X$ reduction in selective non-catalytic reduction is converted to not only nitrogen but also nitrous oxide. Simultaneous $NO_X$ reduction and nitrous oxide generation suppressing is required in selective non-catalytic reduction because nitrous oxide influences the global warming as a greenhouse gas. The current study was performed compare the computational analysis in the same temperature and amount of NaOH, and in comparison with the previous research experiments and confirmed the reliability of the computational fluid dynamics. Additionally, controlling the addition amount of NaOH to predict the $NO_X$ reduction efficiency and nitrous oxide production. Numerical analysis was done to check the mass fraction of each material in the measurement point at the end of selective non-catalytic reduction. Experimental Value and simulation value by numerical analysis showed an error of up to 18.9% was confirmed that a generally well predicted. and it was confirmed that the widened temperature range of more than 70% $NO_X$ removal rate is increased when the addition amount of NaOH. So, large and frequent changes of the reaction temperature waste incineration facilities are expected to be effective.

• Journal of Korea Water Resources Association
• /
• v.55 no.4
• /
• pp.257-266
• /
• 2022

Inundation damage is increasing every year due to localized heavy rain and an increase of rainfall exceeding the design frequency. Accordingly, the importance of hydraulic structures for flood control and defense is also increasing. The hydraulic structures are designed according to its purpose and performance, and the amount of flood is an important calculation factor. However, in Korea, design rainfall is used as input data for hydrological analysis for the design of hydraulic structures due to the lack of sufficient data and the lack of reliability of observation data. Accurate probability rainfall and its temporal distribution are important factors to estimate the design rainfall. In practice, the regression equation of temporal distribution for the design rainfall is calculated using the cumulative rainfall percentage of Huff's quartile method. In addition, the 6^th order polynomial regression equation which shows high overall accuracy, is uniformly used. In this study, the optimized regression equation of temporal distribution is derived using the variable selection method according to the principle of parsimony in statistical modeling. The derived regression equation of temporal distribution is verified through the significance test. As a result of this study, it is most appropriate to derive the regression equation of temporal distribution using the stepwise selection method, which has the advantages of both forward selection and backward elimination.

• Journal of Chest Surgery
• /
• v.30 no.2
• /
• pp.172-178
• /
• 1997

We present a etrospective analysis of arterial embolectomies performed at the Inje University Seoul Paik Hospital. During the period of March 1987 Feburary 1996 twenty-six patients underwent embolectomies, eighteen patients were male and eight patients were female, mean age of patients was 56.8 years. Rest pain was the chief complaint in 24 patients, the remaining two patients complained of long term history of claudication after recovery of acute symtoms. But only 10 patients had sensBrylmotor symtoms. Heart was the most common source of embolization and frequent predisposing factor of embolism was ischemic heart disease in 8 cases and valvular heart disease in 11 cases. The sites of embolization were upper extremities artery in 6 cases, saddle embolism in 2 cases, lower extremities artery in 18 cases and the most common site of embolism was femoral artery in 1 1 cases. Preoperative angiography was taken in the diagnosis and planning of the embolectomy in 1) patients while in the other patient p eoperative angiography was not taken. Only two cases were operated within the golden period of 6 hours and other cases were operated in more than 6 hours after embolization. In all patients, the Fogarty embolectomy catheter was used without bypass surgery via bachial ateriotomy in the embolism of upper extremities artery, bilateral groin approaches in the saddle embolism and transfemoral approach in the embolism of lower extremities artery. However 3 patients were re-operated via transpopliteal approach in the distal poplitiotibial embolism. Eighteen patients received perioperative anticoagulation therapy by heparin or fraxiparine and wafarin was used in 17 patients at the time of discharge and the indication of anticogulation was patients of valvular heat disease andfor atrial fibrillation, peripheral artery atherosclerosis and recurrent embolism. Postoperative results of the embolectomy were as follows: fouteen pateints had excellent results, five cases had symtom improvement after re-operation, B. K. amputation in 1 case who had severe atherosclerosis of lower extremities, recurrent embolism in 1 case and death in 2 cases the cause of death were acute renal failure and cerebral artery embolism, respectively. The complications of the embolectomy were reperfusion syndrome, pseudoaneurysm and intimal dissection in one case each. Conclusively the problems of embolism is delayed diagnosis and increasing number of old aged patient who had suffered from ischemic heart diease. Preoperative angiography was not always needed for embol ectomy. Selective anticoagulation therapy can decrease incidence of re-embolism. In the distal poplitiotibial embolism, embolectomy of tibial artery was difficult.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.247-251
• /
• 2004

반도체 소자의 제조에 있어 실리콘 표면에 성장한 자연산화막을 제거하기 위해 일반적으로 습식 세정 기술이 이용되어 왔다. 하지만 소자의 최소 선폭(design rule)이 nano급으로 고집적화 됨에 따라 contact hole 바닥의 자연산화막을 깨끗이 제거하는데 있어서 그 한계를 나타나고 있다. 이에 대한 효과적인 대안 공정으로 가스 건식 세정 기술이 연구되고 있다. 본 논문에서는 한 번에 50매 이상의 웨이퍼를 처리함으로써 생산성 측면에서 월등한 배치식 설비에서 원거리 플라즈마(remote plasma) 장치에서 2.450Hz의 마이크로웨이브(${\mu}$-wave)에 의해 형성시킨 수소라디칼과 $NF_3$ 가스를 이용하여 실리콘에 결함을 주지 않고 자연산화막을 선택적으로 제거하는 공정에 대해 고찰하였다. AFM을 이용한 표면분석, TEM을 이용한 물성분석, 그리고 ToF-SIMS 및 XPS를 이용한 화학 분석을 습식 및 건식 세정을 비교 평가한 결과, 건식 세정 공정이 실리콘 표면에 결함을 주지 않고 자연산화막을 제거 할 수 있음을 확인하였다. 산화막$(SiO_2)$, 질화막$(Si_3N_4)$, 그리고 다결정 실리콘(Poly-Si) 등의 각 막질별 식각 특성을 고찰하였으며, $NH_3$의 캐리어 가스인 $N_2$의 주입량을 조절함으로써 수소라디칼 형성 효율의 개선이 가능하였으며, 이로부터 게이트와 소스/드레인 사이를 절연하기 위해 이용되는 질화막의 식각 선택비를 2배 정도 개선할 수 있었다. nano급 소자에 실장하여 평가한 결과에서 불산(HF)에 의한 습식 세정 방식에 비하여 약 $20{\sim}50%$ 정도의 contact 저항 감소 효과가 있음이 확인되었다.두 소자 모두 $40mA/cm^2$ 에서 이상적인 화이트 발란스와 같은(0.33,0.33)의 색좌표를 보였다.epsilon}_0=1345$의 빼어난 압전 및 유전특성과 $330^{\circ}C$의 높은 $T_c$를 보였고 그 조성의 vibration velocity는 약4.5 m/s로 나타났다.한 관심이 높아지고 있다. 그러나 고 자장 영상에서의 rf field 에 의한 SAR 증가는 중요한 제한 요소로 부각되고 있다. 나선주사영상은 SAR 문제가 근원적으로 발생하지 않고, EPI에 비하여 하드웨어 요구 조건이 낮아 고 자장에서의 고속영상방법으로 적합하다. 본 논문에서는 고차 shimming 을 통하여 불균일도를 개선하고, single shot 과 interleaving 을 적용한 multi-shot 나선주사영상 기법으로 $100{\times}100$에서 $256{\times}256$의 고해상도 영상을 얻어 고 자장에서 초고속영상기법으로 다양한 적용 가능성을 보였다. 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에 의해서 개선되었다. 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확

• Clean Technology
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2022

In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes-MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR-were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L^-1 T MAH influent could be 98% removed when the HRT of the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.

• Journal of Intelligence and Information Systems
• /
• v.20 no.4
• /
• pp.121-139
• /
• 2014

Predicting corporate failure has been an important topic in accounting and finance. The costs associated with bankruptcy are high, so the accuracy of bankruptcy prediction is greatly important for financial institutions. Lots of researchers have dealt with the topic associated with bankruptcy prediction in the past three decades. The current research attempts to use ensemble models for improving the performance of bankruptcy prediction. Ensemble classification is to combine individually trained classifiers in order to gain more accurate prediction than individual models. Ensemble techniques are shown to be very useful for improving the generalization ability of the classifier. Bagging is the most commonly used methods for constructing ensemble classifiers. In bagging, the different training data subsets are randomly drawn with replacement from the original training dataset. Base classifiers are trained on the different bootstrap samples. Instance selection is to select critical instances while deleting and removing irrelevant and harmful instances from the original set. Instance selection and bagging are quite well known in data mining. However, few studies have dealt with the integration of instance selection and bagging. This study proposes an improved bagging ensemble based on instance selection using genetic algorithms (GA) for improving the performance of SVM. GA is an efficient optimization procedure based on the theory of natural selection and evolution. GA uses the idea of survival of the fittest by progressively accepting better solutions to the problems. GA searches by maintaining a population of solutions from which better solutions are created rather than making incremental changes to a single solution to the problem. The initial solution population is generated randomly and evolves into the next generation by genetic operators such as selection, crossover and mutation. The solutions coded by strings are evaluated by the fitness function. The proposed model consists of two phases: GA based Instance Selection and Instance based Bagging. In the first phase, GA is used to select optimal instance subset that is used as input data of bagging model. In this study, the chromosome is encoded as a form of binary string for the instance subset. In this phase, the population size was set to 100 while maximum number of generations was set to 150. We set the crossover rate and mutation rate to 0.7 and 0.1 respectively. We used the prediction accuracy of model as the fitness function of GA. SVM model is trained on training data set using the selected instance subset. The prediction accuracy of SVM model over test data set is used as fitness value in order to avoid overfitting. In the second phase, we used the optimal instance subset selected in the first phase as input data of bagging model. We used SVM model as base classifier for bagging ensemble. The majority voting scheme was used as a combining method in this study. This study applies the proposed model to the bankruptcy prediction problem using a real data set from Korean companies. The research data used in this study contains 1832 externally non-audited firms which filed for bankruptcy (916 cases) and non-bankruptcy (916 cases). Financial ratios categorized as stability, profitability, growth, activity and cash flow were investigated through literature review and basic statistical methods and we selected 8 financial ratios as the final input variables. We separated the whole data into three subsets as training, test and validation data set. In this study, we compared the proposed model with several comparative models including the simple individual SVM model, the simple bagging model and the instance selection based SVM model. The McNemar tests were used to examine whether the proposed model significantly outperforms the other models. The experimental results show that the proposed model outperforms the other models.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.300-303
• /
• 2007

지문자는 청각장애인이 사용하는 수화로 표현하지 못하는 한글 문자를 알파벳으로 표시하기위한 손 제스처이다. 본 논문에서는 추출된 손 영역의 무게 중심과 퍼지 논리를 이용하여 지문자를 인식하는 알고리즘을 제안하고, 한글 문자를 표현하는 시스템을 개발한다. USB 카메라로부터 얻어진 영상에서 히스토그램을 이용하여 손의 피부색 영역을 추출하고, 영상 마스크를 이용하여 피부색이 아닌 배경 영역을 제거한다. 문턱 값을 사용하여 얻어진 이진화된 영상에서 손의 영역을 검출하고, 무게 중심을 이용하여 손 중심과 손가락 끝의 거리를 측정한다. 얻어진 거리 정보에 퍼지 기법을 적용하여 손가락의 굽힘 정도를 판단하고, 손 모양 데이터베이스에서 손가락 굽힘 정도와 가장 근사한 한글 문자를 선택한다.

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.82-88
• /
• 1990

In order to investigate tribological effects of coatings on different places on tool wear, commercial quality coated inserts were tested in production speed machining after the coatings on clearance or rake face of coated tools were selectively removed. The experimental results demonstrated that the primary role of coatings in tool wear was the reduction of the thermochemical adhesion between the tool material and workpiece. And the coating on rake face was observed to retard the progress of flank wear. In case of machining carbon steel, multicoated tools showed the most favorable results for considering the notch wear.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.57-57
• /
• 1996

공기로 붜 산소와 질소의 분리, C$_1$-화학공정중의 부산물 가스분리등은 많은 에너지를 필요로 하는 화학공정이다. 이런 에너지 집약적 분리공정에서는 에너지효율을 높이기 위하여 막분리공정의 적용을 고려할 수 있다. 막분리에 적용되는 기체분리막은 분리의 원리에 따라 (a)knudsen flow separation, (b)Molecular sieving separation, (c) Solution-diffusion separation 등으로 나눠진다. 이중 molecular sieving membrane (공경: <7${\AA}$)은 solution-diffusion막보다 높은 투과도와 선택도를 갖기 때문에 최근에 들어 높은 관심을 받고 있다. 그러나 장기성능저하, fouling제거, 제조방법상의 문제점에 대한 해결이 요구되고 있다. 본 연구에서는 폴리이미드를 열분해법을 이용하여 탄화시켜 탄소분자체막을 제조하였고 막제조시에 발생하는 기계적 강도약화를 해결하기 위한 고찰을 행하였다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.11a
• /
• pp.148-151
• /
• 2009

본 연구에서는 광섬유를 이용하여 반사형과 투과형의 MR-Compatible Photoplethysmograph (PPG) 측정 시스템을 개발하고, 그 성능을 비교하고자 한다. 반사형 타입은 광섬유 다발의 끝단을 피부에 접촉 시킨 후 반사현상을 이용하여 PPG 신호를 측정하고, 투과형 타입은 광섬유 사이에 피부를 접촉시킨 후 투과현상을 이용하여 PPG 신호를 계측한다. PPG 측정 시스템은 광 신호를 검출하는 센서 부분, 근적외선 광 신호를 송수신하는 광케이블 부분, 신호 증폭 부분, 잡음 제거를 위한 필터부분으로 구성되어 있다. 반사형 및 투과형 PPG 신호의 SNR을 비교한 결과 반사형은 23.5dB이고 투과형은 22.2dB로 차이가 거의 없었다. 그러므로 실험 환경이나 목적에 따라 두 가지 타입 중 효율성이 좀 더 높은 것을 선택하여 사용할 수 있을 것이다.