• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.13-17
• /
• 2006

Dense and periodic arrays of holes and tungsten none dots were fabricated on silicon oxide and silicon. The holes were approximately 25 nm wide, 40 nm deep, and 60 nm apart. To obtain nano-size patterns, self-assembling resists were used to produce layer of hexagonally ordered parallel cylinders of polymethylmethacrylate(PMMA) in polystyrene(PS) matrix. The PMMA cylinders were degraded and removed with acetic acid rinse to produce a PS mask for pattern transfer. The silicon oxide was removed by fluorine-based reactive ion etching(RIE). Selectively deposited tungsten nano dots were formed inside nano-sized trench by using a low pressure chemical vapor deposition(LPCVD) method. Tungsten nano dot and trenched silicon sizes were 26 nm and 30 nm, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.1-12
• /
• 2003

DAB(Digital audio broadcasting) is a next generation radio broadcasting system which provides CD quality audio, various data services and superior reception ability when moving. Also, it can show traffic informations and news literally or graphically. In this paper, we design and fabricate the DAB tuner for ITS service that follows Eureka-147 and ETSI 300 401 specifications. This small-sized tuner can be adopted to mny electronic equipments such as a Hi-Fi audio, DVD player, car audio system etc.. The overall performance of the tuner depends on a phase noise of VCO and the sensitivity of the receiving system is influenced by LNA, image rejection filter and channel selection filter. All our measurement results satisfy the specification for a DAB system with the return loss of 9dB, the noise figure of 6dB for both Band 111 and L-band and the sensitivity of -97dBm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.408-420
• /
• 2003

This paper describes a Delay Locked Loop (DLL) circuit having two advancements : 1) a dual loop operation for a wide lock-range and 2) programmable replica delays using antifuse circuitry and internal voltage generator for a post-package skew calibration. The dual loop operation uses information from the initial time-difference between reference clock and internal clock to select one of the differential internal loops. This increases the lock-range of the DLL to the lower frequency. In addition, incorporation with the programmable replica delay using antifuse circuitry and internal voltage generator allows for the elimination of skews between external clock and internal clock that occur from on and off-chip variations after the package process. The proposed DLL, fabricated on 0.16m process, operates over the wide range of 42MHz - 400MHz with 2.3v power supply. The measured results show 43psec peak-to-peak jitter and 4.71psec ms jitter consuming 52㎽ at 400MHz.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.41-50
• /
• 1999

In this paper, the new VLSI architecture of a reconstruction filter for morphological image segmentation is proposed. The filter, based on the $h_{max}$ operation, simplifies the interior of each region while preserving the boundary information. The proposed architecture adopts a partitioned memory structure and an efficient image scanning strategy to reduce the operations. The proposed memory partitioning scheme makes it possible that every data required for processing can be read from each memory at a time, resulting in parallel data processing. By the extended connectivity consideration, the operation is much decreased because more simplification is achieved in scanning stage. The selective raster scan strategy endows the satisfactory noise removal capability with negligible hardware complexity increase. The proposed architecture is designed using VHDL, and functional evaluation is performed by the CAD tool, Mentor. The experiment results show that the proposed architecture can simplify image profile with less than 18% operations of the conventional method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.154-161
• /
• 2015

A novel multiframe super-resolution (SR) algorithm is presented to overcome the limitation of existing single-image SR algorithms using motion information from adjacent frames in a video. The proposed SR algorithm consists of three steps: i) definition of a local region using interframe motion vectors, ii) multiscale patch generation and adaptive selection of multiple optimum patches, and iii) combination of optimum patches for super-resolution. The proposed algorithm increases the accuracy of patch selection using motion information and multiscale patches. Experimental results show that the proposed algorithm performs better than existing patch-based SR algorithms in the sense of both subjective and objective measures including the peak signal-to-noise ratio (PSNR) and structural similarity measure (SSIM).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.4
• /
• pp.221-228
• /
• 1974

산란직전의 남해산 참굴(Crassostrea gigas)을 산채로 구입하여 통상조건하에서 탈각하여 얻은 굴육질을 polyethylene laminated aluminium pouch (Al+PE : 0.03+0.03mm) 속에 밀봉하여 살균선량(0.2Mrad) 및 멸균선량(2.0Mrad)의 감마선으조 조사하고, 한편, 100ppm의 염소수에 굴육질을 2분간 침지한 후 탈수하여 같은 방법으로 포장하여 35일간의 빙장기간중 세균학적 및 화학적 변화를 대조 굴(조사치 않고 염소수 처리하지 않은)의 경우와 비교하였다. 굴육질의 시초의 총균수는 g당 700-800에 달했고, 0.2 Mrad의 감마선 조사는 빙장 10일째의 저장 기간중의 총 균수를 검측할 수 있는 선 이하로 감소시켰으며 2.0 Mrad 조사는 20일째까지 거의 무균상태를 가져왔다. 감마선 조사는 또한 세균활동을 표시하는 대사물질인 TMA와 TCA soluble nitrogen의 축적을 현저히 억제시켰으며 빙장 후기부터 번식하기 시작하여 총균수가 g당 100,000을 초과케 된 35일째까지도 대조굴의 동일한 총균수 시기에 비하여 이 대사물의 축적억제가 현저했음은 감마선 조사의 효과가 총균수의 양적인 감소뿐만 아니라 동시에 TMA를 생산하고 단백질을 분해할 능력이 있는 세균제거 내지는 번식의 억제라는 선택적인 양면을 가지고 있음을 보여 준다. 염소수 처리한 굴육질의 경우 총균수의 양적인 감소효과는 현저하지 않했는데도 불구하고 감마선 조사 경우처럼 세균대사물질 축적의 철저한 억제를 가져 왔음은 주목할만 하다. 굴육질의 glycogen 함량은 사후 저장 기간 중 쉽사리 감소되지 않했으며 PH 측정으로 본 생굴의 신선도와의 관련성은 희박하며 조사와 염소수 처리굴의 경우 더욱 그러했다.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.48-55
• /
• 2015

IMO to issue some restricted maritime legislation for reducing the adverse environmental impacts arising from such ship exhaust emissions. According to the IMO policy, every ship entering the Baltic SECAs has to equip the gas cleaning scrubber. The discharged waste solution by gas cleaning scrubber contains many types of salts, which to recover some valuable materials before disposal. This study try to achieve valuable salts including AN and AS throughout a few process such as selective organic solvents salting out, low temperature extraction and thermal evaporation. Amongst them, Thermal evaporation with repetition extraction using inorganic solvent was the most optimum to purify the extracted AN. This valuable salt was evaluated by Elemental analysis and Differential scanning calorimetry.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.88-95
• /
• 2013

This study attempts to capture the low level carbon dioxide from indoor spaces using a granular activated carbon (WSC-470) which was modified with primary monoethanolamine. Adsorption capacity of the prepared adsorbents was evaluated for pure $CO_2$ flow and 3000 ppm as a function of MEA concentration and solvents such as distilled water, ethanol and methanol. The AC based adsorbents then were characterized in terms of pore structure by BET and chemical functionalities by XPS. While high concentration of MEA reduced specific surface area, porosity and micro pores, nitrogen content which can enhance the surface basicity was increased. The maximum adsorption capacity decreased comparing to the initial AC pellets, whilst the potential of selective adsorption amount at low level $CO_2$ was increased at 45% (0.73 mmol/g).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.80-87
• /
• 2004

In this paper we proposed the novel feature extraction method that is able to extract the individual characters from the license plate area of the car image more precisely by using the RGB color information and the fuzzy binarization newly proposed. The proposed method, first, extracts from the original image the areas that the pixels with the colors around the green are concentrated on as the candidate areas of the license plate, and selects the area with the most intensive distribution of pixels with the white color among the candidate areas as the license plate area. Second the noises of the license plate area should be removed by using 34{\times}$3 Sobel masking, and the fuzzy binarization method are proposed and applied to the license plate area to generate the binarized image of the license plate area. Lastly, the application of the contour tracking algorithm to the binarized area extracts the individual characters from the license plate area. The experiment on a variety of the real car images showed that the proposed method generates the higher rate of success for character extraction than the previous methods.

• Journal of Broadcast Engineering
• /
• v.15 no.5
• /
• pp.617-630
• /
• 2010

At 37th VCEG meeting in Jan. 2009, Toshiba proposed Quadtree-based Adaptive Loop Filter (QALF). The basic concept of QALF is to apply Wiener filter to decoded image after the conventional deblocking filter and to represent the filter on/off flag data for each basic filtering unit in a more efficient way of quadtree structure. QALF could enhance the compression performance of around more than 9%, but the structure of one filter for a decoded frame leaves room for further improvement in the sense that optimal filter for one region of a frame could quite different from the optimal filter for other parts of a picture. This paper proposes multiple adaptive loop filters for better utilization of local characteristics of decoded frame to optimize the region-based Wiener filters. Additional filters, proposed in this paper, cover separate spatial area of each decoded frame according to the performance of previously designed filter(s) to provide the flexibility of rate-distortion based selection of the number of filters.