• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.342-348
• /
• 2015

High speed implementation of digital filters is required in high data rate applications such as hard-wired wide band modem and high resolution video codec. Since the critical path of the digital filter is the MAC (multiplication and accumulation) circuit, the filter coefficient with sparse non-zero bits enables high speed implementation with adders of low hardware cost. Compressive sensing has been reported to be very successful in sparse representation and sparse signal recovery. In this paper a filter design method for digital FIR filters with CSD (canonic signed digit) coefficients using compressive sensing technique is proposed. The sparse non-zero signed bits are selected in the greedy fashion while pruning the mistakenly selected digits. A few design examples show that the proposed method can be utilized for designing sparse CSD coefficient digital FIR filters approximating the desired frequency response.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.125-133
• /
• 2016

With the aim of using a filler material in a conductive paste, fine Cu nanoparticles were synthesized through the high-speed chemical reaction between cuprous oxide ($Cu_2O$) powder and sulfuric acid in distilled water. Under external temperature of $7^{\circ}C$, sulfuric acid concentration of 48%, and $Cu_2O$ amount of 30 g, the $Cu_2O$ particles were eliminated and slightly aggregated Cu nanoparticles were synthesized. Futhermore, Cu nanoparticles of 224 nm, in which the aggregation between particles was obviousiy much suppressed, were synthesized with the choice of an additive. In the particle sample, occasionally there are coarse particles formed by the aggregation of fine nanoparticles and weak linkages between the nanoparticles. However, the coarse particles were destroyed and the linkages were broken after mixing with a resin formulation, indicating the behavior of untangling the aggregation between nanoparticles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.193-205
• /
• 2011

This paper suggests $p$-facility locations in $m$ candidate locations and $n$ areas in optimal cost side(population${\times}$shortest distance). This problem has been classified by NP-complete because there is not a polynomial time algorithm. In this paper, we suggests reverse-delete method that deletes a candidate facility one by one from $p=m$ until $p=2$. As a result of the proposed algorithm for the $5{\times}5$ and $7{\times}7$, the initial solution is obtained. For the Swain's 55-node network, we obtain the optimal solution through a solution improvement process with $p=4$ and it by using the initial solution with $p=5$.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.69-76
• /
• 2016

In this paper, we investigate the system performance of a cooperative relaying system of Non-orthogonal multiple access (NOMA) with successive interference cancellation (SIC), which is considered promising application in fifth generation (5G) cellular networks. Previous studies have focused on the selected relays, however we include the maxmin relay selection and derive analytical outage probability of opportunistic incremental relaying systems. For the realistic mobile environment, the distributions of relays are modeled as a homogeneous Poisson point process (PPP). And maximal ratio combining (MRC) is adapted to improve the system performance at the destination node. Analytical results demonstrate the outage probability improves with the near/far user power ratio, and the cooperative relaying scheme can achieve low outage probability in comparison to the no relaying scheme. It is also conformed that the increase of the intensity of PPP cause higher gains of the spacial diversity and hence the performance improves.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.347-356
• /
• 2003

Camera pose and scene geometry estimation from video sequences is widely used in various areas such as image composition. Structure and motion recovery based on the auto calibration algorithm can insert synthetic 3D objects in real but un modeled scenes and create their views from the camera positions. However, most previous methods require bundle adjustment or non linear minimization process [or more precise results. This paper presents a new auto' calibration algorithm for video sequence based on two steps: the one is key frame selection, and the other removes the key frame with inaccurate camera matrix based on an absolute quadric estimation by LMedS. In the experimental results, we have demonstrated that the proposed method can achieve a precise camera pose estimation and scene geometry recovery without bundle adjustment. In addition, virtual objects have been inserted in the real images by using the camera trajectories.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.21-28
• /
• 1999

A new method of making high speed self-aligned ESD (Elevated Source/Drain) MOSFET is proposed. Different from the conventional LDD (Lightly-Doped Drain) structure, the proposed ESD structure needs only one ion implantation step for the source/drain junctions, and makes it possible to modify the depth of the recessed channel by use of dry etching process. This structure alleviates hot-carrier stress by use of removable nitride sidewall spacers. Furthermore, the inverted sidewall spacers are used as a self-aligning mask to solve the self-align problem. Simulation results show that the impact ionization rate ($I_{SUB}/I_{D}$) is reduced and DIBL (Drain Induced Barrier Lowering) characteristics are improved by proper design of the structure parameters such as channel depth and sidewall spacer width. In addition, the use of removable nitride sidewall spacers also enhances hot-carrier characteristics by reducing the peak lateral electric field in the channel.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1663-1669
• /
• 2018

Pair programming is a software development technique in which two programmers work together at one computer. One writes code while the other reviews the code, and they switch roles frequently. Pair-programming practice in school programming lab is expected to improve the learning performance, provide collaboration experience, and promote interactions between students. This work finds out how students accept pair-programming, what make students reluctant to join pair-programming by repeated questionnaire surveys in a college programming lab class. Based on these findings aome guidelines for school pair-programming are provided. First, students should be allowed to choose to do pair-programming or not. Second, various obstacles that make students hesitate to switch roles should be removed. Third, the pair matching should be made with great care.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.4 s.32
• /
• pp.77-83
• /
• 2004

In this paper, the Classification of Energy Labeling has been proposed. Energy parameters of input signal which are extracted from each phoneme are labelled. And groups of labelling according to detected energies of input signals are detected. Next. DTW processes in a selected group of labeling. This leads to DTW processing faster than a previous algorithm. In this Method, because an accurate detection of parameters is necessary on the assumption in steps of a detection of speeching duration and a detection of energy parameters, variable windows which are decided by pitch period are used. A pitch period is detected firstly : next window scale is decided between 200 frames and 300 frames. The proposed method makes it possible to cancel an influence of windows and reduces the computational complexity by $25\%$.

• Journal of Convergence Society for SMB
• /
• v.2 no.2
• /
• pp.1-6
• /
• 2012

In this paper, we propose a detector generation model which is applied to immune system to improve the misuse detection rates in misuse detection models. 10cv method is used to sendmail data which is provided by the DARPA. We experimented and analyzed the misuse detection rate that is either judgment of the normal system call as abnormal system call or judgment of the abnormal system call as normal system call. In the experiment, between detector which was generated by any abnormal system call and temporary detector. I did experiments with a new detector which was removed temporary detector which made a wrong decision for normal system call as an abnormal system call and abnormal system call as a normal system call. The misuse detection rate of detector which is applied to the immune system is greater than the other detector by 0.3%.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.509-516
• /
• 1994

Liquid phase hydrogenation come into use for the removal process of unsaturated hydrocarbon such as croton aldehyde. The croton aldehyde is generated in a very small amount as by-product in the ethanol production, and it is converted into n-butanol through hydrogenation. Liquid phase hydrogenation is low energy consumption process as compared with gas phase hydrogenation. The nickel catalyst is selected with respect to the economic aspect such as durability and cost. The analysis of the conversion were performed by method of the PMT(permangante time) test. The PMT was sharply decreased as the initial concentrations of croton aldehyde in the ethanol solution were increased. The hydrogenation of croton aldehyde to n-butanol was carried out in sequence after the saturation of the carbon-carbon double bond. The formation of both butyraldehyde and n-butanol followed zero order kinetics. Within expermental conditions the PMT gets longer as reaction temperature goes higer and as LHSV becomes slower, while the reaction pressure has almost no relation with PMT.