• Title/Summary/Keyword: 선의 부호화

Search Result 133, Processing Time 0.027 seconds

TD-CDMA System Using HARQ Chase Combining in Mobile Channel (이동채널 환경에서 HARQ Chase Combining 기법을 적용한 TD-CDMA 시스템의 성능 분석)

  • Jeong, You-Sun;Choi, Woo-Jin
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.5 no.5
    • /
    • pp.516-521
    • /
    • 2010
  • In the high-speed packet service, next generation mobile communication system has emerged as a major feature. If the fire of these high-speed D kit services and non-continuous transmission of data due to the symmetrical nature of daeyiteo traffic for D-CDMA system has been actively studied. In this paper, we apply turbo codes for D-CDMA has been investigated. Considering the nature of the system configuration of the transmission frame type, such as physical channel structure and channel coding has been investigated. In addition to TD-CDMA system, one HARQ gibeopjung hase Combining the performance analysis techniques were applied.

Performance Analysis of Precoded LTE-Advanced Uplink System (LTE-Advanced 시스템의 선부호화된 상향 링크 성능 분석)

  • Kim, Sang-Gu;Li, Xun;Kim, Young-Ju
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.48 no.5
    • /
    • pp.8-15
    • /
    • 2011
  • LTE-Advanced aims at peak data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished only by using wide spectrum allocation of 100MHz as well as advanced multiple input multiple output antenna techniques to the uplink. This paper analyzes the uplink precoding techniques which include LTE codebook of downlink, singular value decomposition codebook, and equal gain transmission codebook over LTE defined single carrier frequency division multiplexing systems. Finally considering nonlinear transmit power amplifier model, it is shown that link-level performance of EGT is superior to those of any other precoding schemes.

A Study on the Reliable Video Transmission Through Source/Channel Combined Optimal Quantizer for EREC Based Bitstream (EREC 기반 비트열을 위한 Source-Channel 결합 최적 양자화기 설계 및 이를 통한 안정적 영상 전송에 관한 연구)

  • 김용구;송진규;최윤식
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.25 no.12B
    • /
    • pp.2094-2108
    • /
    • 2000
  • 오류를 수반하는 통신망을 통한 멀티미디어 데이터의 응용은 최근 그 수요가 급증하고 있다. 하지만 그 구현은 많은 문제점들을 야기하는데, 전송된 비디오 데이터에 발생한 오류를 처리하는 문제가 그 중 하나이다. 이는 압축된 비트열에 발생한 오류가 영상의 시-공간 방향으로 심각한 전파 현상을 수반하기 때문이다. 이러한 심각한 오류 전파를 완화하기 위해 본 논문에서는 EREC라 알려진 오류 제한 기법을 적용하고, 적용된 EREC의 오류 전파 특성을 분석하였다. 이를 통해, 압축 부호화된 하나의 기본 블록 (매크로 블록)이 복호시 오류가 생길 확률을 추정하였으며, 추정된 확률의 근사를 통해 양 끝단(전송단과 수신단)에서의 비디오 화질 열화를 예측하였다. 추정 확률의 근사는 매 기본 블록에서 발생된 비트수에 대한 그 기본 블록이 복호시 오류가 생길 확률을 간단한 1차식을 통한 선형 회귀법으로 모델링 되었으며, 따라서 간단한 방법을 통해 양 끝단의 화질 열화를 효과적으로 예측할 수 있었다. 부호화된 비트열이 전송 오류에 보다 강인하게 되도록 하기 위해, 본 논문에서 개발된 화질 열화 모델을 양자화기 선택에 적용함으로써, 새로운 최적 양자화 기법을 제시하였다. 본 논문에서 제안된 최적 양자화 기법은, 기존의 양자기 최적화 기법들과는 달리, 복호단에서의 복원 영상 화질이 주어진 비트율에서 최적이 되도록 양자화를 수행한다. H.263 비디오 압축 규격에 적용한 제안 양자화 기법의 실험 결과를 통해, 제안 기법이 매우 적은 계산상의 부하를 비용으로 객관적 화질은 물론 주관적 화질까지 크게 개선할 수 있음을 확인할 수 있었다.내었다.Lc. lacti ssp. lactis의 젖산과 초산의 생성량은 각각 0.089, 0.003과 0.189, 0.003M이었다. 따라서 corn steep liquor는 L. fermentum와 Lc. lactis ssp, lactis 의 생장을 위해 질소 또는 탄소 공급원으로서 배지에 첨가 될 수 있는 우수한 농업 부산물로 판단되었다.징하며 WLWQ에 적용되는 몇 가지 제약을 관찰하고 이를 일반적인 언어원리로 설명한다. 첫째, XP는 주어로만 해석되는데 그 이유는 XP가 목적어 혹은 부가어 등 다른 기능을 할 경우 생략 부위가 생략의 복원 가능선 원리 (the deletion-up-to recoverability principle)를 위배하기 때문이다. 둘째, WLWQ가 내용 의문문으로만 해석되는데 그 이유는 양의 공리(the maxim of quantity: Grice 1975) 때문이다. 평서문으로 해석될 경우 WP에 들어갈 부분이 XP의 자질의 부분집합에 불과하므로 명제가 아무런 정보제공을 하지 못한다. 반면 의문문 자체는 정보제공을 추구하지 않으므로 앞에서 언급한 양의 공리로부터 자유롭다. 셋째, WLWQ의 XP는 주제어 표지 ‘는/-은’을 취하나 주어표지 ‘가/-이’는 취하지 못한다(XP-는/-은 vs. XP-가/-이). 이는 IP내부 에 비공범주의 존재 여부에 따라 C의 음운형태(PF)가 시성이 정해진다는 가설로 설명하고자 했다. WLWQ에 대한 우리의 논의가 옳다면, 본 논문은 다음과 같은 이론적 함의를 기닌다. 첫째, WLWQ의 존재는 생략에 대한 두 이론 즉 LF 복사 이론과 PF 삭제 이론

  • PDF

Efficient Local Decoding Using Bit Stream Map for High Resolution Video (비트 스트림 지도를 이용한 고해상도 영상의 효율적인 지역복호화)

  • Park Sungwon;Won Jongwoo;Lee Sunyoung;Kim Wookjoong;Kim Kyuheon;Jang Euee S
    • Journal of Broadcast Engineering
    • /
    • v.9 no.4 s.25
    • /
    • pp.391-401
    • /
    • 2004
  • In this paper, we introduce a novel coding method to efficiently enable spatial random access for high resolution video. In terms of resolution and display size, standard display devices (such as cathode-ray tubes. monitors. PDAs, and LCDs) do not sufficiently support high resolution video such as digital cinema and panoramic video. Currently, users have no choice but to view video at lower resolution as a result of down-sampling, or only a partial region of the video due to display size limitations. Our proposed method. which we call the B-map, represents the set of starting locations of the coded segments in a picture frame. This information, or B-map, is first sent to the decoder prior to the coded data stream of the frame and is then used for fast local decoding. To test our method, we compare our B-map with JPEG tiling and the JPEG Resynchronization marker. Experimental results show that the proposed coding method requires less overhead than existing methods during the same decoding time. The results show promise for future panoramic or digital cinema applications.

The Motion Estimator Implementation with Efficient Structure for Full Search Algorithm of Variable Block Size (다양한 블록 크기의 전역 탐색 알고리즘을 위한 효율적인 구조를 갖는 움직임 추정기 설계)

  • Hwang, Jong-Hee;Choe, Yoon-Sik
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.11
    • /
    • pp.66-76
    • /
    • 2009
  • The motion estimation in video encoding system occupies the biggest part. So, we require the motion estimator with efficient structure for real-time operation. And for motion estimator's implementation, it is desired to design hardware module of an exclusive use that perform the encoding process at high speed. This paper proposes motion estimation detection block(MED), 41 SADs(Sum of Absolute Difference) calculation block, minimum SAD calculation and motion vector generation block based on parallel processing. The parallel processing can reduce effectively the amount of the operation. The minimum SAD calculation and MED block uses the pre-computation technique for reducing switching activity of the input signal. It results in high-speed operation. The MED and 41 SADs calculation blocks are composed of adder tree which causes the problem of critical path. So, the structure of adder tree has changed the most commonly used ripple carry adder(RCA) with carry skip adder(CSA). It enables adder tree to operate at high speed. In addition, as we enabled to easily control key variables such as control signal of search range from the outside, the efficiency of hardware structure increased. Simulation and FPGA verification results show that the delay of MED block generating the critical path at the motion estimator is reduced about 19.89% than the conventional strukcture.

The Study on The Application of QAM-OFDM Scheme for Nonlinear Satellite Channel (비선형 위성 채널에서 QAM-OFDM 방식의 적용에 관한 연구)

  • Lee, Hae-Seon
    • 전자공학회논문지 IE
    • /
    • v.45 no.1
    • /
    • pp.44-49
    • /
    • 2008
  • In this paper, the performance for the non-linear satellite channel including the characteristics of group delay and gain ripple of transponder is analyzed with multi-level QAM-OFDM schemes. Comparing the BER performances between general OFDM and CI(Carrier Interferometry)-OFDM for various QAM schemes, the degree of performance improvement is presented in AWGN environments for specified nonlinear characteristics. The simulations are performed with the 36MHz bandwidth of transponder channel and 120Mbps transmission rate for QPSK, 8QAM, 16QAM, 32QAM, 64QAM schemes between normal and worst case condition. It is shown that the improvement measure by the CI-OFDM for the group delay of channel and nonlinear characteristic of HPA outperforms that for the gain ripple in the case of higher level QAM scheme in normal condition. And the simulation results show that the additional techniques like the channel coding and compensation scheme against the nonlinear characteristic are required for 32QAM and higher level QAM in worst case condition.

Fast Intra Prediction Mode Decision based on Rough Mode Decision and Most Probable Mode in HEVC (Rough Mode Decision과 Most Probable Mode에 기반을 둔 HEVC 고속 인트라 예측 모드 결정 방법)

  • Lee, Seung-Ho;Park, Sang-Hyo;Jang, Euee Seon
    • Journal of Broadcast Engineering
    • /
    • v.19 no.2
    • /
    • pp.158-165
    • /
    • 2014
  • High Efficiency Video Coding (HEVC), the latest video coding standard, has twice of the compression efficiency compared to AVC/H.264 under the same image quality condition. To obtain the improved efficiency, however, it was adopted for many methods which need complicated calculation, and the time complexity of HEVC was increased more than that of AVC/H.264. To solve this problem, the various fast algorithms have been researched. In this paper, we propose a fast intra prediction mode decision method which uses result of Rough Mode Decision (RMD) and Most Probable Mode (MPM). The proposed method selects a best predicted mode by comparing each predicted directions which are calculated through RMD and MPM. We applied the proposed method to HM 10.0 and conducted an comparing experiment in All-Intra environment. The experiment result showed that total encoding time is reduced by about 26% on average with about a 0.8% loss of BD-rate.

MPEG-4 based XMT APIs for Scene Description (장면 기술을 위한 MPEG-4 기반 XMT API 구현)

  • 정예선;김규헌;기명석
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2001.11b
    • /
    • pp.91-94
    • /
    • 2001
  • MPEG-4 시스템은 장면 자체를 하나의 구성 요소로 여기는 기존의 시스템과는 달리, 그 장면을 구성하는 부호화 또는 복호화된 A/V 객체(Audio/visual Objects)들을 하나의 단위로 인식하여, 다양한 멀티미디어 컨텐츠의 장면을 구성(Scene Composition)하고 표현 하는 것에 그 특징이 있다. 이러한 MPEG-4 시스템의 객체 기반 특징은 다양한 사용자와의 대화성(Interactivity)을 가능하게 하며 , 또한 편리한 컨텐츠 편집 및 재사용 등이 가능하기에 차세대 디지털 방송 컨텐츠 제작에 중요하게 활용될 전망이다. 객체 기반 A/V 편집 도구는 MPEG-4를 기반으로 차세대 디지털 방송 컨텐츠 제작을 용이하게 하기 위한 제작/편집 도구로써 , 장면을 표현하기 위하여 BIFS(Binary Format for Scene description)와 XMT(eXtensible MPEG-4 Textual format) 포맷을 모두 사용하고 있다. BIFS 포맷은 저작된 결과물을 바이너리 형태로 표현하기 때문에, 저작된 결과물을 전송하는 데에는 용이하나, 중간에 저작된 결과물을 확인하기 어렵고, 또한 기존의 다른 어플리케이션과의 상호 작용(Interoperability)과 교환(Exchange)에도 어려움이 따른다. 이에 반해, XMT는 차세대 마크업 언어로 각광 받고 있는 XML 에 그 기반을 두고 있기에 저작된 결과물을 제작자가 쉽게 저작물을 이해할 수 있으며, SMIL 과 X3D 같은 다른 어플리케이션과의 상호작용과 교환 또한 용이하게 한다 XMT는 기술 방법에 따라 XMT-A 와 XMT-0 두 가지 형태가 있으며, XMT-A 포맷은 VRML에서 발전한 X3D(extensible 3D)를 바탕으로 MPEG-4 시스템의 특징들을 수용하여 구성되고 BIFS와 일대일로 대응된다. 반면에 XMT-0는 멀티미디어 문서를 웹문서로 표현하는 SMIL 2.0 을 그 기반으로 하였기에 MPEG-4 시스템의 특징보다는 컨텐츠를 저작하는 제작자의 초점에 맞추어 개발된 형태이다. XMT를 이용하여 컨텐츠를 저작하기 위해서는 사용자 인터페이스를 통해 입력되는 저작 정보들을 손쉽게 저장하고 조작할 수 있으며, 또한 XMT 파일 형태로 출력하기 위한 API 가 필요하다. 이에, 본 논문에서는 XMT 형태의 중간 자료형으로의 저장 및 조작을 위하여 XML 에서 표준 인터페이스로 사용하고 있는 DOM(Document Object Model)을 기반으로 하여 XMT 문법에 적합하게 API를 정의하였으며, 또한, XMT 파일을 생성하기 위한 API를 구현하였다. 본 논문에서 제공된 API는 객체기반 제작/편집 도구에 응용되어 다양한 멀티미디어 컨텐츠 제작에 사용되었다.

  • PDF

Efficient QP-per-frame Assignment Method for Low-delay HEVC Encoder (저지연 HEVC 부호화기를 위한 효율적인 프레임별 양자화 파라미터 할당 방법)

  • Park, Sang-hyo;Jang, Euee S.
    • Journal of Broadcast Engineering
    • /
    • v.21 no.3
    • /
    • pp.349-356
    • /
    • 2016
  • In this paper, we propose an efficient assignment method that assigns quantization parameter (QP) in accordance with group of picture (GOP) structure given in HEVC encoder. Each video frames can have difference QP values based on given GOP configuration for HEVC encoding. Particularly, for important frames we can assign low QP values, and vice versa. However, there has not been thorough investigation on efficient QP assignment method by far. Even in HEVC reference software encoder, only monotonic QP assignment method is employed. Thus, the proposed method assign adaptive QP values to each GOP so that temporal dynamic activity between GOPs can be exploited. Through the experiment, the proposed method showed a 7.3% gain of compression performance in terms of BD-rate compared to HEVC test model (HM) in low-delay configuration, and outperformed the existing QP assignment study on average.

Design and performance evaluation of optimum TCM combined with CPM signals in the frequency-selective fading channel (주파수 선택성 페이딩 채널에서 CPM 신호와 결합된 최적 TCM의 설계 및 성능 평가)

  • 정영모;이상욱;심수보
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.6
    • /
    • pp.1064-1074
    • /
    • 1994
  • In this paper, an optimum TCM(trellis coded modulation)combined with CPM(continuous phase modulation) signal is investigated, and the performances are evaluated on the two-ray fading channel, which is one of the well-known frequency-selected because of their relatively good power and spectrum efficiency, and the modulation index is varied from 0.1 to 0.6. The performance is evaluated for each modulation index. The constraint length of the encoder, which is comprised in TCM, is chosen to be 2 and 3. From the performance evaluations, when the constraint length is 3 and modulation index 0.5, a power gain if the optimum TCM over the scheme without coding is observed to be 2.0dB for 1REC and 2.1dB for 3RC, respectively, on the fading channel. Thus, a significant improvement on the line quality is expected when the optimum TCM presented in this paper is employed in digital mobile radio applications.

  • PDF