• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2019

Purpose: Helmet type bolus for 3D printer is being manufactured because of the disadvantages of Bolus materials when photon beam is used for the treatment of scalp malignancy. However, PLA, which is a used material, has a higher density than a tissue equivalent material and inconveniences occur when the patient wears PLA. In this study, we try to treat malignant scalp tumors by using M3 wax helmet with 3D printer. Methods and materials: For the modeling of the helmet type M3 wax, the head phantom was photographed by CT, which was acquired with a DICOM file. The part for helmet on the scalp was made with Helmet contour. The M3 Wax helmet was made by dissolving paraffin wax, mixing magnesium oxide and calcium carbonate, solidifying it in a PLA 3D helmet, and then eliminated PLA 3D Helmet of the surface. The treatment plan was based on Intensity-Modulated Radiation Therapy (IMRT) of 10 Portals, and the therapeutic dose was 200 cGy, using Analytical Anisotropic Algorithm (AAA) of Eclipse. Then, the dose was verified by using EBT3 film and Mosfet (Metal Oxide Semiconductor Field Effect Transistor: USA), and the IMRT plan was measured 3 times in 3 parts by reproducing the phantom of the head human model under the same condition with the CT simulation room. Results: The Hounsfield unit (HU) of the bolus measured by CT was $52{\pm}37.1$. The dose of TPS was 186.6 cGy, 193.2 cGy and 190.6 cGy at the M3 Wax bolus measurement points of A, B and C, and the dose measured three times at Mostet was $179.66{\pm}2.62cGy$, $184.33{\pm}1.24cGy$ and $195.33{\pm}1.69cGy$. And the error rates were -3.71 %, -4.59 %, and 2.48 %. The dose measured with EBT3 film was $182.00{\pm}1.63cGy$, $193.66{\pm}2.05cGy$ and $196{\pm}2.16cGy$. The error rates were -2.46 %, 0.23 % and 2.83 %. Conclusions: The thickness of the M3 wax bolus was 2 cm, which could help the treatment plan to be established by easily lowering the dose of the brain part. The maximum error rate of the scalp surface dose was measured within 5 % and generally within 3 %, even in the A, B, C measurements of dosimeters of EBT3 film and Mosfet in the treatment dose verification. The making period of M3 wax bolus is shorter, cheaper than that of 3D printer, can be reused and is very useful for the treatment of scalp malignancies as human tissue equivalent material. Therefore, we think that the use of casting type M3 wax bolus, which will complement the making period and cost of high capacity Bolus and Compensator in 3D printer, will increase later.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.1-19
• /
• 2019

Artificial intelligence (AI) is one of the main driving forces leading the Fourth Industrial Revolution. The technologies associated with AI have already shown superior abilities that are equal to or better than people in many fields including image and speech recognition. Particularly, many efforts have been actively given to identify the current technology trends and analyze development directions of it, because AI technologies can be utilized in a wide range of fields including medical, financial, manufacturing, service, and education fields. Major platforms that can develop complex AI algorithms for learning, reasoning, and recognition have been open to the public as open source projects. As a result, technologies and services that utilize them have increased rapidly. It has been confirmed as one of the major reasons for the fast development of AI technologies. Additionally, the spread of the technology is greatly in debt to open source software, developed by major global companies, supporting natural language recognition, speech recognition, and image recognition. Therefore, this study aimed to identify the practical trend of AI technology development by analyzing OSS projects associated with AI, which have been developed by the online collaboration of many parties. This study searched and collected a list of major projects related to AI, which were generated from 2000 to July 2018 on Github. This study confirmed the development trends of major technologies in detail by applying text mining technique targeting topic information, which indicates the characteristics of the collected projects and technical fields. The results of the analysis showed that the number of software development projects by year was less than 100 projects per year until 2013. However, it increased to 229 projects in 2014 and 597 projects in 2015. Particularly, the number of open source projects related to AI increased rapidly in 2016 (2,559 OSS projects). It was confirmed that the number of projects initiated in 2017 was 14,213, which is almost four-folds of the number of total projects generated from 2009 to 2016 (3,555 projects). The number of projects initiated from Jan to Jul 2018 was 8,737. The development trend of AI-related technologies was evaluated by dividing the study period into three phases. The appearance frequency of topics indicate the technology trends of AI-related OSS projects. The results showed that the natural language processing technology has continued to be at the top in all years. It implied that OSS had been developed continuously. Until 2015, Python, C ++, and Java, programming languages, were listed as the top ten frequently appeared topics. However, after 2016, programming languages other than Python disappeared from the top ten topics. Instead of them, platforms supporting the development of AI algorithms, such as TensorFlow and Keras, are showing high appearance frequency. Additionally, reinforcement learning algorithms and convolutional neural networks, which have been used in various fields, were frequently appeared topics. The results of topic network analysis showed that the most important topics of degree centrality were similar to those of appearance frequency. The main difference was that visualization and medical imaging topics were found at the top of the list, although they were not in the top of the list from 2009 to 2012. The results indicated that OSS was developed in the medical field in order to utilize the AI technology. Moreover, although the computer vision was in the top 10 of the appearance frequency list from 2013 to 2015, they were not in the top 10 of the degree centrality. The topics at the top of the degree centrality list were similar to those at the top of the appearance frequency list. It was found that the ranks of the composite neural network and reinforcement learning were changed slightly. The trend of technology development was examined using the appearance frequency of topics and degree centrality. The results showed that machine learning revealed the highest frequency and the highest degree centrality in all years. Moreover, it is noteworthy that, although the deep learning topic showed a low frequency and a low degree centrality between 2009 and 2012, their ranks abruptly increased between 2013 and 2015. It was confirmed that in recent years both technologies had high appearance frequency and degree centrality. TensorFlow first appeared during the phase of 2013-2015, and the appearance frequency and degree centrality of it soared between 2016 and 2018 to be at the top of the lists after deep learning, python. Computer vision and reinforcement learning did not show an abrupt increase or decrease, and they had relatively low appearance frequency and degree centrality compared with the above-mentioned topics. Based on these analysis results, it is possible to identify the fields in which AI technologies are actively developed. The results of this study can be used as a baseline dataset for more empirical analysis on future technology trends that can be converged.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.60-74
• /
• 2018

This study was to investigate the pedestrian's thermal environments in the North Sidewalk of E-W Street during summer heatwave. We carried out detailed measurements with four human-biometeorological stations on Dongjin Street, Jinju, Korea ($N35^{\circ}10.73{\sim}10.75^{\prime}$, $E128^{\circ}55.90{\sim}58.00^{\prime}$, elevation: 50m). Two of the stations stood under one row street tree and hedge(One-Tree), two row street tree and hedge (Two-Tree), one of the stations stood under shelter and awning(Shelter), while the other in the sun (Sunlit). The measurement spots were instrumented with microclimate monitoring stations to continuously measure microclimate, radiation from the six cardinal directions at the height of 1.1m so as to calculate the Universal Thermal Climate Index (UTCI) from 24th July to 21th August 2018. The radiant temperature of sidewalk's elements were measured by the reflective sphere and thermal camera at 29th July 2018. The analysis results of 9 day's 1 minute term human-biometeorological data absorbed by a man in standing position from 10am to 4pm, and 1 day's radiant temperature of sidewalk elements from 1:16pm to 1:35pm, showed the following. The shading of street tree and shelter were mitigated heat stress by the lowered UTCI at mid and late summer's daytime, One-Tree and Two-Tree lowered respectively 0.4~0.5 level, 0.5~0.8 level of the heat stress, Shelter lowered respectively 0.3~1.0 level of the heat stress compared with those in the Sunlit. But the thermal environments in the One-Tree, Two-Tree and Shelter during the heat wave supposed to user "very strong heat stress" while those in the Sunlit supposed to user "very strong heat stres" and "exterme heat stress". The main heat load temperature compared with body temperature ($37^{\circ}C$) were respectively $7.4^{\circ}C{\sim}21.4^{\circ}C$ (pavement), $14.7^{\circ}C{\sim}15.8^{\circ}C$ (road), $12.7^{\circ}C$ (shelter canopy), $7.0^{\circ}C$ (street funiture), $3.5^{\circ}C{\sim}6.4^{\circ}C$ (building facade). The main heat load percentage were respectively 34.9%~81.0% (pavement), 9.6%~25.2% (road), 24.8% (shelter canopy), 14.1%~15.4% (building facade), 5.7% (street facility). Reducing the radiant temperature of the pavement, road, building surfaces by shading is the most effective means to achieve outdoor thermal comfort for pedestrians in sidewalk. Therefore, increasing the projected canopy area and LAI of street tree through the minimal training and pruning, building dense roadside hedge are essential for pedestrians thermal comfort. In addition, thermal liner, high reflective materials, greening etc. should be introduced for reducing the surface temperature of shelter and awning canopy. Also, retro-reflective materials of building facade should be introduced for the control of reflective sun radiation. More aggressively pavement watering should be introduced for reducing the surface temperature of sidewalk's pavement.

• Journal of Intelligence and Information Systems
• /
• v.27 no.3
• /
• pp.231-252
• /
• 2021

Artificial intelligence (AI) is a key technology that will change the future the most. It affects the industry as a whole and daily life in various ways. As data availability increases, artificial intelligence finds an optimal solution and infers/predicts through self-learning. Research and investment related to automation that discovers and solves problems on its own are ongoing continuously. Automation of artificial intelligence has benefits such as cost reduction, minimization of human intervention and the difference of human capability. However, there are side effects, such as limiting the artificial intelligence's autonomy and erroneous results due to algorithmic bias. In the labor market, it raises the fear of job replacement. Prior studies on the utilization of artificial intelligence have shown that individuals do not necessarily use the information (or advice) it provides. Algorithm error is more sensitive than human error; so, people avoid algorithms after seeing errors, which is called "algorithm aversion." Recently, artificial intelligence has begun to be understood from the perspective of the augmentation of human intelligence. We have started to be interested in Human-AI collaboration rather than AI alone without human. A study of 1500 companies in various industries found that human-AI collaboration outperformed AI alone. In the medicine area, pathologist-deep learning collaboration dropped the pathologist cancer diagnosis error rate by 85%. Leading AI companies, such as IBM and Microsoft, are starting to adopt the direction of AI as augmented intelligence. Human-AI collaboration is emphasized in the decision-making process, because artificial intelligence is superior in analysis ability based on information. Intuition is a unique human capability so that human-AI collaboration can make optimal decisions. In an environment where change is getting faster and uncertainty increases, the need for artificial intelligence in decision-making will increase. In addition, active discussions are expected on approaches that utilize artificial intelligence for rational decision-making. This study investigates the impact of artificial intelligence on decision-making focuses on human-AI collaboration and the interaction between the decision maker personal traits and advisor type. The advisors were classified into three types: human, artificial intelligence, and human-AI collaboration. We investigated perceived usefulness of advice and the utilization of advice in decision making and whether the decision-maker's personal traits are influencing factors. Three hundred and eleven adult male and female experimenters conducted a task that predicts the age of faces in photos and the results showed that the advisor type does not directly affect the utilization of advice. The decision-maker utilizes it only when they believed advice can improve prediction performance. In the case of human-AI collaboration, decision-makers higher evaluated the perceived usefulness of advice, regardless of the decision maker's personal traits and the advice was more actively utilized. If the type of advisor was artificial intelligence alone, decision-makers who scored high in conscientiousness, high in extroversion, or low in neuroticism, high evaluated the perceived usefulness of the advice so they utilized advice actively. This study has academic significance in that it focuses on human-AI collaboration that the recent growing interest in artificial intelligence roles. It has expanded the relevant research area by considering the role of artificial intelligence as an advisor of decision-making and judgment research, and in aspects of practical significance, suggested views that companies should consider in order to enhance AI capability. To improve the effectiveness of AI-based systems, companies not only must introduce high-performance systems, but also need employees who properly understand digital information presented by AI, and can add non-digital information to make decisions. Moreover, to increase utilization in AI-based systems, task-oriented competencies, such as analytical skills and information technology capabilities, are important. in addition, it is expected that greater performance will be achieved if employee's personal traits are considered.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.9-16
• /
• 2018

Purpose : Brain Stereotactic Radiosurgery can treat non-invasive diseases with high rates of complications due to surgical operations. However, brain stereotactic radiosurgery may be accompanied by radiation induced side effects such as fractionation radiation therapy because it uses radiation. The effects of Coplanar Volumetric Modulated Arc Therapy(C-VMAT) and Non-Coplanar Volumetric Modulated Arc Therapy(NC-VMAT) on surrounding normal tissues were analyzed in order to reduce the side effects caused fractionation radiation therapy such as head and neck. But, brain stereotactic radiosurgery these contents were not analyzed. In this study, we evaluated the usefulness of NC-VMAT by comparing and analyzing C-VMAT and NC-VMAT in patients who underwent brain stereotactic radiosurgery. Methods and materials : With C-VMAT and NC-VMAT, 13 treatment plans for brain stereotactic radiosurgery were established. The Planning Target Volume ranged from a minimum of 0.78 cc to a maximum of 12.26 cc, Prescription doses were prescribed between 15 and 24 Gy. Treatment machine was TrueBeam STx (Varian Medical Systems, USA). The energy used in the treatment plan was 6 MV Flattening Filter Free (6FFF) X-ray. The C-VMAT treatment plan used a half 2 arc or full 2 arc treatment plan, and the NC-VMAT treatment plan used 3 to 7 Arc 40 to 190 degrees. The angle of the couch was planned to be 3-7 angles. Results : The mean value of the maximum dose was $105.1{\pm}1.37%$ in C-VMAT and $105.8{\pm}1.71%$ in NC-VMAT. Conformity index of C-VMAT was $1.08{\pm}0.08$ and homogeneity index was $1.03{\pm}0.01$. Conformity index of NC-VMAT was $1.17{\pm}0.1$ and homogeneity index was $1.04{\pm}0.01$. $V_2$, $V_8$, $V_{12}$, $V_{18}$, $V_{24}$ of the brain were $176{\pm}149.36cc$, $31.50{\pm}25.03cc$, $16.53{\pm}12.63cc$, $8.60{\pm}6.87cc$ and $4.03{\pm}3.43cc$ in the C-VMAT and $135.55{\pm}115.93cc$, $24.34{\pm}17.68cc$, $14.74{\pm}10.97cc$, $8.55{\pm}6.79cc$, $4.23{\pm}3.48cc$. Conclusions : The maximum dose, conformity index, and homogeneity index showed no significant difference between C-VMAT and NC-VMAT. $V_2$ to $V_{18}$ of the brain showed a difference of at least 0.5 % to 48 %. $V_{19}$ to $V_{24}$ of the brain showed a difference of at least 0.4 % to 4.8 %. When we compare the mean value of $V_{12}$ that Radione-crosis begins to generate, NC-VMAT has about 12.2 % less amount than C-VMAT. These results suggest that if NC-VMAT is used, the volume of $V_2$ to $V_{18}$ can be reduced, which can reduce Radionecrosis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.27-34
• /
• 2018

Purpose : To evaluate the effect of carbon couch side rail and vacuum immobilization device in case of lung RPO irradiation. Materials and Methods : The 10, 20, 30 mm thickness of vac-lok's right side were obtained. To measure of doses, glass dosimeters were used and measured reference point is left lung center at the phantom. A, B, C, and D points are left, right, down, and up directions based on the center point. In the state of Side-Rail-Out, place the without vac-lok, with the thickness of 10, 20, and 30 mm vac-lok. After the glass dosimeters was inserted in center, A, B, C, and D points, 100 MU of 6 MV X-ray were irradiated to the referenced center point in the condition of $10{\times}10cm^2$ field size, SAD 100 cm, gantry angle 225, 300 MU/min dose rate. Five measurements were made for each point. In the state of Side-Rail-In, five measurement were made for each point under the same conditions. The average is measured on each of the five Side-Rail-Out and Side-Rail-In measurements. Results : In the presence of side rail, the dose reduction ratio was -11.8 %, -12.3 %, -4.1 %, -12.3 %, -7.3 % for each A, B, C, and D points. In the state of Side-Rail-Out, the dose reduction ratio for the using 10 mm thickness of vac-lok was -0.9 % than without vac-lok. The dose reduction ratio for the using 20 mm thickness of vac-lok was -2.0 %, for the using 30 mm thickness of the vac-lok was -3.0 % than without vac-lok. In the state of Side-Rail-In, the dose reduction ratio for the using 10 mm thickness of vac-lok was -1.0 % than without vac-lok. The dose reduction ratio for the using 20 mm vac-lok was -2.1 %, for the using 30 mm vac-lok was -3.0 % than without vac-lok. Based on the value of no vac-lok dose in the Side-Rail-In state, The dose reduction ratios for the using 10 mm, 20 mm and 30 mm thickness of vac-loks In the Side-Rail-Out that the center point were -12.7 %, -13.7 %, -14.2 % and -12.8 %, -13.8 %, -14.5 % respectively at point A. The dose reduction ratios for the same conditions to the B point were -4.9 %, -6.1 %, -7.1 % and -13.4 %, -14.4 %, -15.5 % respectively at point C. The dose reduction ratios for the same conditions to the D point were -8.4 %, -9.0 %, -10.4 % respectively. Conclusion : The attenuation was caused by presence of side rails and thickness of vac-lok. Pay attention to these attenuation factors, making it a more effective radiation therapy.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.2-31
• /
• 2020

CheomSeongDae (瞻星臺) is a stone structure built in Gyeongju, the former Silla Dynasty capital, during the reign of Queen Seondeok (632~647AD). There exist dozens of hypotheses regarding its original purpose. Depending on to whom you ask, the answer could be a celestial observatory, a religious altar, a Buddhist stupa, a monumental tower symbolizing scientific knowledge, and so on. The most common perception of the structure among lay people is a stargazing tower. Historians, however, have suggested that it was intended as "a gateway to the heavens", specifically the Trāyastriṃśa or the second of the six heavens of Kāmadhātu located on the top of Mountain Sumeru. The name "Cheom-seong-dae" could be interpreted in many different ways. 'Cheom (瞻)' could refer to looking up, staring, or admiring, etc.; 'Seong (星)' could mean a star, heaven, night, etc.; and 'heaven' in that context can be a physical or religious reference. 'Dae (臺)' usually refers to a high platform on which people stand or things are placed. Researchers from the science fields often read 'cheom-seong' as 'looking at stars'; while historians read it as 'admiring the Trāyastriṃśa' or 'adoring Śakra'. Śakra is said to be the ruler of Trāyastriṃśa' who governs the Four Heavenly Kings in the Cāturmahārājika heaven, the first of the six heavens of Kāmadhātu. Śakra is the highest authority of the heavenly kings in direct contact with humankind. This paper examined the usages of 'cheom-seong' in Chinese literature dated prior to the publication of 『Samguk Yusa』, a late 13th century Korean Buddhist historical book that contains the oldest record of the structure among all extant historical texts. I found the oldest usage of cheom-seong (瞻星臺) in 『Ekottara Āgama』, a Buddhist script translated into Chinese in the late 4th century, and was surprised to learn that its meaning was 'looking up at the brightness left by Śakra'. I also found that 'cheom-seong' had been incorporated in various religious contexts, such as Hinduism, Confucianism, Buddhist, Christianism, and Taoism. In Buddhism, there was good, bad, and neutral cheom-seong. Good cheom-seong meant to look up to heaven in the practice of asceticism, reading the heavenly god's intentions, and achieving the mindfulness of Buddhism. Bad cheom-seong included all astrological fortunetelling activities performed outside the boundaries of Buddhism. Neutral cheom-seong is secular. It may help people to understand the nature of the physical world, but was considered to have little meaning unless relating to the spiritual world of Buddhism. Cheom-seong had been performed repetitively in the processes of constructing Buddhist temples in China. According to Buddhist scripts, Queen Māyā of Sakya, the birth mother of Gautama Buddha, died seven days after the birth of Buddha, and was reborn in the Trāyastriṃśa heaven. Buddha, before reaching nirvana, ascended from Jetavana to Trāyastriṃśa and spent three months together with his mother. Gautama Buddha then returned to the human world, stepping upon the stairs built by Viśvakarman, the deity of the creative power in Trāyastriṃśa. In later years, King Asoka built a stupa at the site where Buddha descended. Since then, people have believed that the stairway to the heavens appears at a Buddhist stupa. Carefully examining the paragraphic structure of 『Samguk Yusa』's records on Cheomseongdae, plus other historical records, the fact that the alignment between the tomb of Queen Seondeok and Cheomseongdae perfectly matches the sunrise direction at the winter solstice supports this paper's position that Chemseongdae, built in the early years of Queen SeonDeok's reign (632~647AD), was a gateway to the Trāyastriṃśa heaven, just like the stupa at the Daci Temple (慈恩寺) in China built in 654. The meaning of 'Cheom-seong-dae' thus turns out to be 'adoring Trāyastriṃśa stupa', not 'stargazing platform'.

• Journal of Intelligence and Information Systems
• /
• v.26 no.4
• /
• pp.87-109
• /
• 2020

Currently, thanks to the major stride made in developing wired and wireless communication technology, a variety of IT services are available on land. This trend is leading to an increasing demand for IT services to vessels on the water as well. And it is expected that the request for various IT services such as two-way digital data transmission, Web, APP, etc. is on the rise to the extent that they are available on land. However, while a high-speed information communication network is easily accessible on land because it is based upon a fixed infrastructure like an AP and a base station, it is not the case on the water. As a result, a radio communication network-based voice communication service is usually used at sea. To solve this problem, an additional frequency for digital data exchange was allocated, and a ship ad-hoc network (SANET) was proposed that can be utilized by using this frequency. Instead of satellite communication that costs a lot in installation and usage, SANET was developed to provide various IT services to ships based on IP in the sea. Connectivity between land base stations and ships is important in the SANET. To have this connection, a ship must be a member of the network with its IP address assigned. This paper proposes a SANET-CC protocol that allows ships to be assigned their own IP address. SANET-CC propagates several non-overlapping IP addresses through the entire network from land base stations to ships in the form of the tree. Ships allocate their own IP addresses through the exchange of simple requests and response messages with land base stations or M-ships that can allocate IP addresses. Therefore, SANET-CC can eliminate the IP collision prevention (Duplicate Address Detection) process and the process of network separation or integration caused by the movement of the ship. Various simulations were performed to verify the applicability of this protocol to SANET. The outcome of such simulations shows us the following. First, using SANET-CC, about 91% of the ships in the network were able to receive IP addresses under any circumstances. It is 6% higher than the existing studies. And it suggests that if variables are adjusted to each port's environment, it may show further improved results. Second, this work shows us that it takes all vessels an average of 10 seconds to receive IP addresses regardless of conditions. It represents a 50% decrease in time compared to the average of 20 seconds in the previous study. Also Besides, taking it into account that when existing studies were on 50 to 200 vessels, this study on 100 to 400 vessels, the efficiency can be much higher. Third, existing studies have not been able to derive optimal values according to variables. This is because it does not have a consistent pattern depending on the variable. This means that optimal variables values cannot be set for each port under diverse environments. This paper, however, shows us that the result values from the variables exhibit a consistent pattern. This is significant in that it can be applied to each port by adjusting the variable values. It was also confirmed that regardless of the number of ships, the IP allocation ratio was the most efficient at about 96 percent if the waiting time after the IP request was 75ms, and that the tree structure could maintain a stable network configuration when the number of IPs was over 30000. Fourth, this study can be used to design a network for supporting intelligent maritime control systems and services offshore, instead of satellite communication. And if LTE-M is set up, it is possible to use it for various intelligent services.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.81-89
• /
• 2011

The results of tracking the symbolism of plants in the introduction factors of Sokhwa(folk painting) are as the following. 1. The term Sokhwa(俗畵) is not only a type of painting with a strong local customs, but also carries a symbolic meaning and was discovered in "Donggukisanggukjip" of Lee, Gyu-Bo(1268~1241) in the Goryo era as well as the various usage in the "Sok Dongmunseon" in the early Chosun era, "Sasukjaejip" of Gang, Hee-mang(1424~1483), "Ilseongrok(1786)" in the late Chosun era, "Jajeo(自著)" of Yoo, Han-joon(1732~1811), and "Ojuyeonmunjangjeonsango(五洲衍文長箋散稿)" of Lee, Gyu-gyung(1788~?). Especially, according to the Jebyungjoksokhwa allegation〈題屛簇俗畵辯證說〉in the Seohwa of the Insa Edition of Ojuyeonmunjangjeonsango, there is a record that the "people called them Sokhwa." 2. Contemporarily, the Korean Sokhwa underwent the prehistoric age that primitively reflected the natural perspective on agricultural culture, the period of Three States that expressed the philosophy of the eternal spirits and reflected the view on the universe in colored pictures, the Goryo Era that religiously expressed the abstract shapes and supernatural patterns in spacein symbolism, and the Chosun Era that established the traditional Korean identity of natural perspective, aesthetic values and symbolism in a complex integration in the popular culture over time. 3. The materials that were analyzed in 1,009 pieces of Korean Sokhwa showed 35 species of plants, 37 species of animals, 6 types of natural objects and other 5 types with a total of 83 types. 4. The shape aesthetics according to the aesthetic analysis of the plants in Sokhwa reflect the primitive world view of Yin/yang and the Five Elements in the peony paintings and dynamic refinement and biological harmonies in the maehwado; the composition aesthetics show complex multi-perspective composition with a strong noteworthiness in the bookshelf paintings, a strong contrast of colors with reverse perspective drawing in the battlefield paintings, and the symmetric beauty of simple orderly patterns in nature and artificial objects with straight and oblique lines are shown in the leisurely reading paintings. In terms of color aesthetics, the five colors of directions - east, west, south, north and the center - or the five basic colors - red, blue, yellow, white and black - are often utilized in ritual or religious manners or symbolically substitute the relative relationships with natural laws. 5. The introduction methods in the Korean Sokhwa exceed the simple imitation of the natural shapes and have been sublimated to the symbolism that is related to nature based on the colloquial artistic characteristics with the suspicion of the essence in the universe. Therefore, the symbolism of the plants and animals in the Korean Sokhwas is a symbolic recognition system, not a scientific recognition system with a free and unique expression with a complex interaction among religious, philosophical, ecological and ideological aspects, as a identity of the group culture of Koreans where the past and the future coexist in the present. This is why the Koran Sokhwa or the folk paintings can be called a cultural identity and can also be interpreted as a natural and folk meaningful scenic factor that has naturally integrated into our cultural lifestyle. However, the Sokhwa(folk paintings) that had been closely related to our lifestyle drastically lost its meaning and emotions through the transitions over time. As the living lifestyle predominantly became the apartment culture and in the historical situations where the confusion of the identity has deepened, the aesthetic and the symbolic values of the Sokhwa folk paintings have the appropriateness to be transmitted as the symbolic assets that protect our spiritual affluence and establish our identity.

• Journal of the Daesoon Academy of Sciences
• /
• v.39
• /
• pp.33-67
• /
• 2021

This paper aims at revealing the core concept of Injon (Human Nobility). The concept of Injon is one of the salient fundamental ideas which makes Daesoon Jinrihoe recognizable as Daesoon Jinrihoe. The concept of Injon has the basic meaning of 'human nobility,' but within the context wherein the nobility of humankind is considered to be greater than the nobility of Heaven and Earth. Although the religious and ideological interpretations of Injon (human nobility) that have developed over time have been quite diverse and abundant, these interpretations are all limited in that they generally assume the relationship between 'Heaven and Earth' and 'Humanity' to be antagonistic. However, if human nobility is relativized in that manner, it can reduce the potential broader meanings of mutual beneficence and the earthly paradise of the later world. These interpretations are grounded in the view of semiotic interpretation. Such interpretations have composed their view point via the semiotic meaning of the words. The semiotic point of view suggests that meanings of words consist in the relation of the word and the object to which it denotes. We will introduce a new view point which can be termed the transcendental view point. This view focuses on how the exact interpretation of words and sentences depends on the comprehension of the triad of systematic relations among the word, object, and speaker. In the Daesoon Thought, the Former World is considered to be the world wherein all creations unfolded according to the principle of mutual contention. This led to the accumulation of grievances and grudges which condensed and filled the Three Realms of Heaven, Earth, and Humanity. The Former World was dominated by Western material civilization, selfishness, and exclusivism. It was also a world where humans suffered from various natural disasters such as floods, droughts, plagues, and wildfires. The Former World lost the constant Dao and was overwhelmed with all kinds of disasters and calamities. That world fell into various kinds of wretchedness. The causes which made the Former World so cruel came from humans misunderstanding their relation to nature and life in general; including human life. The anthropocentric modern cosmology insisted that the human race was the only one to have the powers and rights to exercise dominion over nature. On the other hand, there is the Later World, which means the ideal and perfect, immanent eternal world for all humankind in Daesoon Thought. This world consists of life, peace, and equality and is also characterized by three typical attributes: goodness, peace, and all kinds of life. All living beings previously struggled for survival, but in the Later World, those lifeforms will embrace each other; even across different realms. In Daesoon Thought, the world and cosmos contain diverse forms of life, and human have both an earthly life and life in the after world should they die before the Later World. There are also the lives of divine beings and animals, and other such living entities. Daesoon Thought subsumes pan-vitalism, which allows they acknowledgement of myriad possible lifeforms. The concept of the Later World in Daesoon Thought, which mainly revealed in The Canonical Scripture and the words of Sangje (Kang Jeungsan), suggests that all kinds of life, including humans, animals, and even spirits in the afterworld, can live together in a perfect coming earthly paradise which is immanent. The concept of Injon can be interpreted though the view of transcendental pragmatics as an alternative to the typical views discussed in Daesoon Thought. Thinkers should attempt to improve current discourse on Injon in Daesoon Thought by focusing on the point that all kinds the original teachings demonstrate a value of all lifeforms. Therein, Injon would indicate not only the human nobility and dignity but also the nobility and dignity of divine beings, divine humans, and all other forms of life that have existed across time. The dimension of time allows for recognition of lifeforms from the Former World, the afterworld, and the Later World. This revised appraisal of Injon could further accommodate denizens of the afterworld, animals, ghosts and spirits, the earth and cloud souls of humans, and other lifeforms held to exist in the cosmology of Daesoon Thought.