• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.335-338
• /
• 2002

본 논문은 부유식 석유 저장 하역 선박(FSO)의 소음 특성 및 해석 기법에 관한 것이다. FSO의 선실 소음 수준은 일반 상선과는 달리 선실 내부에 있는 소음원 이외에도 topside에 있는 각종 소음원들의 영향을 크게 받는다. 따라서, topside에 있는 각종 소음원들이 선실의 소음수준에 미치는 영향을 정확히 평가하는 것이 중요하다. 일반적으로 FSO의 소음해석은 옥외 및 선실 소음 해석으로 구분하여 수행한다. 본 논문에서는 topside에 있는 각종 소음원들의 공기음 전파 특성 해석은 ISO 9613에 근거한 프로그램을 이용하였고, 고체음 전파 특성은 파워 흐름 해석법을 이용하였다. 또한 선실 소음 해석은 통계적 에너지 해석법(SEA)을 이용하였으며, 해석 결과로부터 높은 소음 수준이 우려되는 구역에 대한 방음 대책을 제시하였다. 위의 선실 소음 해석 결과는 향후 FSO의 topside에 있는 각종 소음원들에 의한 선실의 소음 해석 기법 정립에 기여할 것으로 기대된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.112-118
• /
• 1994

In this paper, statistical approach to prediction of A-weighted noise level in ship cabins. based on multiple linear regression analysis, is conducted. The best regression formula is composed of seven parameters of the deadweight, the type of ship, the location of engines and cabins, the type of deckhouse and the propeller skew angle. Verification work was carried out with other 210 cabins' data in 6 ships. As a result, the formula ensures the accuracy of 3 dB(A) in 77 % of cases.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.5
• /
• pp.41-47
• /
• 2004

In this paper, floor impact noise reduction in cruise ship cabin is studied. A mock-up is built by using 6t steel plate, and two identical cabins are made where 25t panel is used to construct wall and ceiling inside the steel structure. Various floating floor systems are tested for which normalized impact noise is measured according to ISO 140-7. In addition, floor SBN (Structure-borne Noise) and floor damping are measured to study the effect of floating floor structure. It is shown that VL(Visco-elastic Layer) is more effective when hard plates are added above the VL.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.97-103
• /
• 1999

As the noise of ship engine room is too loud, the engineer who works in a ship engine-room has the trouble of hearing. In this paper deals the investigation of the noise of ship engine room and cabins with the internationally allowable noise exposure level and noise exposure time. Recently, the problem of engine-room noise is more serious because of shipowner wants to make small number and larger size of cylinder. Therefore, engineers work in a ship engine-room for a long time have the trouble of hearing when they are exposed the high noise level. In this study, two kinds of vessels were used to investigate the noise of engine room, engine-control room, bridge, offices and cabins. As criteria of sound levels, A-weighted sound pressure level and octave band pressure level were used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.237-238
• /
• 2013

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.268-274
• /
• 1991

The methods of prelimiuary noose prediction by Janssen, Buiten, etc are introduced. The distribution of noise levels in newly built ships are investigated. A new procedure for noise prediction is proposed which reflects the results of the investigations. The dominant noise souroes(M/E, D/G) are regarded as one virtual source. The structureborne transmission loss are divided into vortical and horizontal components and the latter component depends on the number of decks as well as the number of frames. The all considered cabins are standardized with typical cabins which have the same acoustic properties. The measured and predicted noise levels are compared In the tables.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.163-164
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.598-599
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.837-842
• /
• 2000

Reverberation time is the well known theory and widely used in commercial apparatus to get reverberation time. However large fluctuation in low frequency region occurs in a small cabin due to superposition of a few modes. This paper investigates this phenomena in terms of modal density in frequency domain and suggests a method to get lower limit of reverberation time using the integration of the time-SPL diagram. The suggestion is confirmed by simulation and shows reasonable results to get lower limit of reverberation time and maximum absorbing power in the cabin.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.483-484
• /
• 2010

Unit cabin means room, which is installed in the high value ship such as drill ship and FPSO, after pre-assembled. In order to develop the noise control design for a unit cabin, a variety of acoustic tests such as sound absorption, transmission, and radiated noise measurements were carried out by using the mock-up of living quarter. From the tests, it was found out that the combined noise level of a unit cabin could be dominated by the radiated noise from wall panel in low frequency range and the design guidelines for the noise control of unit cabin were fully established, such as the improvement of sound transmission loss between the cabin and corridor, and radiated cabin noise reduction.